Effects of Ti–B and Si additions on microstructure and mechanical properties of Al–Cu–Mg based aluminum matrix composites
Source abstract
Abstract
Abstract Ti–B and Si were added to an Al–Cu–Mg alloy to form various reinforcement phases. Various methods for characterizing reinforcement and bulk materials of the aluminum matrix composite (AMC) were investigated. A primary α-Al lamellar structure composed of α-Al and Al2CuMg (S) and Al3Zr phases was formed in Base alloy. The formation of the Al3Zr phase was suppressed and the Al3(Zr,Ti) phase and TiB2 particles were additionally observed in the Ti–B added alloy. Meanwhile, Mg2Si (β), Al2Cu (θ) and Al5Cu2Mg8Si6 (Q) phases were formed, and the Al2CuMg (S) phase disappeared in the Si added alloy. We deduced that Mg2Si (β) and Al5Cu2Mg8Si6 (Q) phases are preferentially formed over the Al2CuMg (S) phase, with the result that the total fraction of Mg in the matrix is decreased in Si added alloy. Several methods for measurement of mechanical properties in AMCs were attempted. Strength was evaluated by compression tests and tensile tests, in which was difficult because of the formation of a brittle Al3(Zr,Ti) phase in the AMCs. Micro Vickers and Brinell hardness tests were conducted to evaluate the hardness of the reinforcement and bulk material, respectively. Nanoindentation has advantages in evaluating the properties of each reinforcement phase, and RUSPec is suitable for evaluation of the bulk unit characteristics of AMCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Advanced materials and technologies for reducing noise, vibration and harshness (NVH) in automobiles
2. Aluminum-based cast in situ composites: a review10.1007/s11665-015-1424-2 ↗
3. The wear behavior of in-situ Al-AlN metal matrix composites10.1007/s12666-014-0407-6 ↗
4. Effect of temperature on the wear behavior of Al-7Si-TiB2 in-situ composites
5. Microstructures and mechanical properties of multiphase-reinforced in situ aluminum matrix composites10.1007/s12540-018-0195-3 ↗
6. Temperature dependence of precipitation behavior of Al-6Mg-9Si-10Cu-10Zn-3Ni natural composite and its impact on mechanical properties10.1016/j.msea.2017.04.015 ↗
7. Temporal evolution of precipitates in multicomponent Al-6Mg-9Si-10Cu-10Zn-3Ni alloy studied by complementary experimental methods10.1016/j.jallcom.2017.01.183 ↗
8. Effects of ultrasonic melt treatment and solution treatment on the microstructure and mechanical properties of low-density multicomponent Al70Mg10Si10Cu5Zn5 alloy10.1016/j.jallcom.2016.11.305 ↗
9. Phase stability low-density, multiprincipal component alloys containing aluminum, magnesium, and lithium10.1007/s11837-014-1059-z ↗
10. Effects of titanium and boron additions with mechanical stirring on mechanical properties in Al-Si alloys10.2320/matertrans.L-M2014848 ↗
11. In Situ processing of Al-TiB2 composite by the stir-casting technique10.1016/S0924-0136(99)00038-2 ↗
12. Microstructure and microsegregation in Al-rich Al-Cu-Mg alloys10.1016/S1359-6454(98)00372-3 ↗
13. Characterization of structure and properties of as-cast AlCuMg alloys10.2320/matertrans.45.440 ↗
14. The influence of Cu rich intermetallic phases on the microstructure, hardness and tensile properties of Al-15% Mg2Si composite10.1016/j.msea.2010.01.063 ↗
15. Metallurgical parameters controlling the microstructure and hardness of Al-Si-Cu-Mg based alloys10.1016/j.matdes.2010.11.040 ↗
16. Resonant ultrasound spectroscopic techniques for measurement of the elastic moduli of solids10.1016/0921-4526(93)90048-B ↗
17. Precipitation processes in Al-Cu-Mg alloys microalloyed with Si10.1007/BF02830331 ↗
18. Effective elastic moduli of Al-Si composites reinforced in situ with TiB2 particles10.1016/j.scriptamat.2005.11.070 ↗
19. Wear behaviour of near eutectic Al-Si alloy reinforced with in-situ TiB2 particles10.1016/j.msea.2008.11.007 ↗
20. Difference in compressive and tensile fracture mechanisms of Zr59Cu20Al10Ni8Ti3bulk metallic glass10.1016/S1359-6454(02)00521-9 ↗
21. The structural stability, mechanical properties and stacking fault energy of Al3Zr precipitates in Al-Cu-Zr alloys: HRTEM observations and first-principles calculations10.1016/j.jallcom.2016.04.178 ↗
22. Al-Ni intermetallic composites produced in situ by friction stir processing10.1016/j.jallcom.2010.05.040 ↗
23. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
24. Nanoindentation studies of materials10.1016/S1369-7021(06)71495-X ↗
25. Influences of stress on the measurement of mechanical properties using nanoindentation: Part Ⅰ. Experimental studies in an aluminum alloy10.1557/JMR.1996.0091 ↗
26. Complete mechanical characterization of nanocrystalline Al-Mg alloy using nanoindentation10.1016/j.mechmat.2012.04.005 ↗
27. The influence of prosity on tensile and compressive strength of porous chalks10.1007/s00603-003-0020-1 ↗