Fabrication of in-situ TiC–TiB2 reinforced Al foam with enhanced properties
Source abstract
Abstract
Abstract In situ TiC–TiB2 reinforced Al foams with excellent mechanical properties were fabricated successfully via a novel method by the combination of Ti–B4C self-propagating reaction and melt processing technique. The results showed that the interfacial bonding of TiB2/Al and TiC/Al was excellent and the in-situ TiC–TiB2 reinforced Al foams exhibited an superior mechanical properties and energy absorption capacity as well as uniform deformation simultaneously. Compared with pure Al foams, the compressive strength and energy absorption capacity of the in-situ TiC–TiB2 reinforced Al foams improved by about 149% and 168%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Manufacture, characterisation and application of cellular metals and metal foams[J]10.1016/S0079-6425(00)00002-5 ↗
2. A study of fabricating and compressive properties of cellular Al-Si(355.0) foam using TiH210.1016/j.matdes.2013.10.022 ↗
3. Compressive response and energy absorption of foamed A359-Al2O3 particle composites10.1016/j.jallcom.2009.07.013 ↗
4. Al-TiH2 composite ‘particles’ as foaming precursors for metallic foams10.1016/j.scriptamat.2015.04.013 ↗
5. Enhancement of the mechanical strength of aluminum foams by SiC nanoparticles10.1016/j.matlet.2015.02.066 ↗
6. Composite and nanocomposite metal foams
7. Compressive behavior of SiCp/AlSi9Mg composite foams10.1016/j.jallcom.2007.06.041 ↗
8. Foaming experiments on LM25 alloy reinforced with SiC particulates10.1016/j.msea.2010.06.024 ↗
9. Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams10.1557/jmr.2013.187 ↗
10. Effect of Y2O3 on the mechanical properties of open cell aluminum foams10.1016/j.matlet.2005.11.088 ↗
11. Effects of TiB2 particle addition on the expansion, structure and mechanical properties of PM Al foams10.1016/j.scriptamat.2003.09.026 ↗
12. A novel approach to obtain in-situ growth carbon nanotube reinforced aluminum foams with enhanced properties10.1016/j.matlet.2015.09.093 ↗
13. Compressive property and energy absorption characteristic of open-cell SiCp/AlSi9Mg composite foams10.1016/j.jallcom.2010.03.172 ↗
14. Chemical reaction mechanism, microstructural characteristics and mechanical properties of in situ (α-Al2O3+ZrB2)/Al composites10.1016/j.matchemphys.2017.04.039 ↗
15. Fabrication of in-situ grown carbon nanotubes reinforced aluminum alloy matrix composite foams based on powder metallurgy method10.1016/j.matlet.2018.09.051 ↗
16. Processing and characterization of in-situ TiB2 stabilized closed cell aluminium alloy composite foams10.1016/j.matdes.2016.03.153 ↗
17. Microstructural and mechanical characterization of two aluminium based in situ composite foams10.1007/s12666-012-0214-x ↗
18. Fabrication of TiCx-TiB2/Al composites for application as a heat sink10.3390/ma9080642 ↗
19. Grain refiners as liquid metal foam stabilisers
20. Effect of varying TiB2 reinforcement and its ageing behaviour on tensile and hardness properties of in-situ Al-4.5%Cu-xTiB2 composite10.1016/j.jallcom.2019.04.137 ↗
21. Processing of open cell aluminum foams with tailored porous morphology10.1016/j.scriptamat.2005.04.055 ↗
22. C.C. Li, C.x. Cui, X. Wang, L.C. Zhao, S.Q. Liu, S. Cui, B.H. Han, Y.H. Xia, Graphene-assisted preparation of in situ TiC-TiB2/Al composite inoculant for Al-Si alloy, Adv. Eng. Mater. published online, doi.org/10.1002/adem.201900378.
23. Characterization and evaluation of interface in SiCp/2024 Al composite10.1016/S1003-6326(15)63740-2 ↗