journal article·2020-06

Improved strengthening in supersaturated Al-Sc-Zr alloy via melt-spinning and extrusion

Yang Yang, Joseph J. Licavoli, Paul G. Sanders

Publisher page

Abstract

Abstract A supersaturated ternary alloy with concentration of Al-0.5Sc-0.4Zr at. % was produced utilizing melt-spinning. The melt-spun ribbon was consolidated and extruded into a rod. A two-step heat treatment was designed to age supersaturated alloys to peak hardness. The melt-spun ribbon and extruded rod were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), microhardness and tensile strength measurements. The ambient microhardness of two-step aged melt-spun ribbon and extruded rod were 1120 MPa and 1180 MPa respectively. The yield and ultimate tensile strength of extruded rod were 300 and 315 MPa with 5.3% elongation. Larger precipitation volume fractions were found in two-step aged extruded rod than in melt-spun ribbon within shorter second-step aging. Strength levels in the melt-spun ribbon and extruded rod agree with order and Orowan strengthening predictions when using TEM measured precipitate radius and volume fractions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Criteria for developing castable, creep-resistant aluminum-based alloys–A review10.3139/146.101249 ↗
2. Clouet · 2005 · 215
3. Precipitation evolution in Al-0.1Sc, Al-0.1Zr, and Al-0.1Sc-0.1Zr (at.%) alloys during isochronal aging10.1016/j.actamat.2010.05.054 ↗
4. Nanoscale structural evolution of Al 3 Sc precipitates in Al (Sc) alloys10.1016/S1359-6454(01)00116-1 ↗
5. Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys10.1016/S1359-6454(02)00201-X ↗
6. Precipitation of Al3Sc in binary Al–Sc alloys10.1016/S0921-5093(01)01326-0 ↗
7. Okamoto · 2002
8. The Al-Sc (aluminum-scandium) system10.1361/105497198770342120 ↗
9. Impurity diffusion of scandium in aluminium10.4028/www.scientific.net/DDF.143-147.115 ↗
10. Mechanical properties of Al(Sc,Zr) alloys at ambient and elevated temperatures10.1016/S1359-6454(03)00320-3 ↗
11. Ambient- and high- temperature mechanical properties of isochronally aged Al-0.06Sc, Al-0.06 Zr, and Al-0.06Sc-0.06Zr alloys (at.%)10.1016/j.actamat.2010.10.017 ↗
12. Nucleation and precipitation strengthening in dilute Al-Ti and Al-Zr alloys10.1007/s11661-007-9283-6 ↗
13. Microstructure of Al3Sc with ternary transition-metal additions10.1016/S0921-5093(01)01608-2 ↗
14. Creep resistance of cast and aged Al–0.1Zr and Al–0.1Zr–0.1Ti (at. %) alloys at 300–400°C10.1016/j.scriptamat.2008.02.059 ↗
15. Complex precipitation pathways in multicomponent alloys10.1038/nmat1652 ↗
16. Segregation in Al3(Sc,Zr) precipitates in Al–Sc–Zr alloys10.1016/j.scriptamat.2004.11.021 ↗
17. Alloys: scandium overtakes zirconium10.1038/nmat1663 ↗
18. Toropova · 1998
19. First-principles study of the solubility of Zr in Al10.1103/PhysRevB.65.094105 ↗
20. The Al-Zr (aluminum-zirconium) system10.1007/BF02667556 ↗
21. Loss in coherency and coarsening behavior of Al3Sc precipitates10.1016/j.actamat.2003.09.042 ↗
22. Model for solute redistribution during rapid solidification10.1063/1.329867 ↗
23. Grain refinement during rapid solidification of aluminum–zirconium alloys using electrospark deposition10.2320/matertrans.MD201228 ↗
24. Ghosh · 1988
25. Influence of powder metallurgical processing on production and properties of rapidly solidified Al–5Cr–2Zr, Al–6·43Cr–1·67Zr, and Al–4Cr–1Fe extrudates10.1179/mst.1990.6.8.749 ↗
26. Rapidly solidified materials10.1098/rsta.1987.0061 ↗
27. Structure and properties of rapidly solidified 7075 P/M aluminum alloy modified with nickel and zirconium10.1007/BF02654387 ↗
28. Formation and coarsening of a nanodispersed microstructure in melt spun Al–Ni–Zr alloy10.1016/S0921-5093(98)00769-2 ↗
29. Microstructure and mechanical properties of a high-Zn aluminum alloy prepared by melt spinning and extrusion10.1016/j.jallcom.2019.152990 ↗
30. High-strength powder metallurgy aluminum alloys in glass-forming Al-Ni-Ce-(Ti or Zr) systems10.1016/0956-716X(93)90322-J ↗
31. Rapid solidification processing: melt spinning of Al-high Si alloys
32. Consolidation by continuous rotary extrusion of aluminium alloys cast by the melt spinning process10.2478/amm-2014-0050 ↗
33. Influence of extrusion temperature on the aging behavior and mechanical properties of an AA6060 aluminum alloy10.3390/met8010051 ↗
34. Precipitation hardening10.1007/BF02670416 ↗
35. Courtney · 2005
36. Argon · 1969
37. Precipitation hardening caused by a difference in shear modulus between particle and matrix10.1002/pssa.2210780223 ↗
38. The cleavage strength of polycrystals
39. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
40. Hall–Petch relationship in friction stir welds of equal channel angular-pressed aluminium alloys10.1016/S0921-5093(03)00008-X ↗
41. Grain refinement in aluminium-zirconium and aluminium-titanium alloys by metastable phases
42. Solidification and precipitation in aluminium-zirconium alloys. Pt. 2
43. The solidification behaviour of dilute aluminium–scandium alloys10.1016/S1359-6454(98)00257-2 ↗
44. Interaction of recrystallization and precipitation: the effect of Al3Sc on the recrystallization behaviour of deformed aluminium10.1016/S1359-6454(03)00002-8 ↗
45. Grain refining of aluminium and its alloys using inoculants10.1179/imr.1989.34.1.247 ↗
46. In situ small-angle scattering study of the precipitation kinetics in an Al–Zr–Sc alloy10.1016/j.actamat.2006.12.015 ↗
47. The physical meaning of indentation and scratch hardness10.1088/0508-3443/7/5/301 ↗
48. Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting10.1016/j.matdes.2016.11.040 ↗
49. Influence of SLM scan-speed on microstructure, precipitation of Al 3 Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys
50. Microstructure and mechanical properties of a novel selective laser melted Al–Mg alloy with low Sc content10.1088/2053-1591/ab5bea ↗
51. Selective laser melting of gas atomized Al–3.02Mg–0.2Sc–0.1Zr alloy powder: microstructure and mechanical properties10.1002/adem.201800650 ↗