journal article·2020-05

Effect of FCC anti-ferromagnetic ordering on the stability of phases in Fe60-xMn30Cr10Cox high entropy alloys

M.D. Acciarri, P. La Roca, L.M. Guerrero, A. Baruj, J. Curiale, M. Sade

Publisher page

Abstract

Abstract The FCC-HCP martensitic transformation in High-Mn steels is strongly affected by the magnetic ordering of the FCC austenite which stabilizes this structure. This manuscript extends the analysis of relative phase stabilities and the effect of magnetic ordering to the FeMnCrCo high entropy alloys recently developed. The effect of Co addition on the martensitic transformation temperatures and magnetic order temperature has been experimentally determined. The substitution of Iron by Cobalt atoms leads to an increase of the martensitic transformation temperature as Co content increases. However for Co contents smaller than approximately 3 at % the FCC-HCP transition is completely inhibited. It is shown that the austenitic FCC structure in the quaternary Fe–Mn–Cr–Co system presents a para to antiferromagnetic transition and that the Neel temperature linearly decreases with the addition of Co. In the same way as in ternary Fe–Mn-X based alloys, it is shown that the antiferromagnetic state of the FCC phase stabilizes this structure. However, this stabilization is less strong in the present quaternary alloys, and -by specific heat measurements-we show that this effect can be rationalized by a decrease of the magnetic entropy change when Co is added. The present results and conclusions are important to design new High Entropy Alloys with a larger number of components.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Li · Nature · 2016 · 354
2. Large recovery strain in Fe-Mn-Si-based shape memory steels obtained by engineering annealing twin boundaries10.1038/ncomms5964 ↗
3. Sato · Mater. Trans. · 2006 · 47 · 57110.2320/matertrans.47.571 ↗
4. Druker · Mater. Sci. Eng. A · 2012 · 556 · 93610.1016/j.msea.2012.07.097 ↗
5. Iron-based shape memory alloys for civil engineering structures: an overview10.1016/j.conbuildmat.2014.04.032 ↗
6. Omori · Science · 2011 · 333 · 6810.1126/science.1202232 ↗
7. La Roca · J. Alloy. Comp. · 2017 · 708 · 42210.1016/j.jallcom.2017.02.280 ↗
8. La Roca · 2015 · 33
9. Palma- Elvira · J. Alloy. Comp. · 2019 · 798 · 4510.1016/j.jallcom.2019.05.130 ↗
10. Pranke · J. Alloy. Comp. · 2015 · 648 · 78310.1016/j.jallcom.2015.06.205 ↗
11. Wang · J. Alloy. Comp. · 2019 · 781 · 73410.1016/j.jallcom.2018.12.061 ↗
12. Effect of high strain amplitude and pre-deformation on damping property of Fe-Mn alloy10.1016/j.jallcom.2018.08.099 ↗
13. Effect of alloying composition on low-cycle fatigue properties and microstructure of Fe-30Mn-(6x)Si-xAl TRIP/TWIP alloys10.1016/j.msea.2013.08.061 ↗
14. Designing Fe–Mn–Si alloys with improved low-cycle fatigue lives”10.1016/j.scriptamat.2014.11.024 ↗
15. Chowdhury · H. Sehitoglu. Mater. Sci. Eng. · 2017 · 122 · 110.1016/j.mser.2017.09.002 ↗
16. La Roca · Shap. Mem. Superelasticity. · 2017 · 3 · 3710.1007/s40830-016-0097-5 ↗
17. Chapter 1
18. Cotes · Metall. Mater. Trans. A · 1995 · 26A · 195710.1007/BF02670667 ↗
19. Thermodynamics of the fcc/hcp martensitic transformation in Fe-Mn alloys:modelling of the driving force, and calculation of the Ms and as temperatures
20. Gibbs energy modelling of the driving forces and calculation of the fcc/hcp martensitic transformation temperatures in Fe-Mn and Fe-Mn-Si alloys10.1016/S0921-5093(99)00388-3 ↗
21. Fcc/Hcp martensitic transformation in the Fe-Mn system: Part II. Driving force and thermodynamics of the nucleation process10.1007/s11661-004-0111-y ↗
22. Phase Stability and fcc/hcp martensitic transformation in Fe-Mn-Si alloys: Part II. Thermodynamic Modelling of the Driving Forces and the Ms and as temperatures10.1016/S0925-8388(98)00660-4 ↗
23. Coupling binary and ternary information in assessing the fcc/hcp relative phase stability and martensitic transformation in Fe-Mn-Co and Fe-Mn-Si alloys
24. Baruj · J. Physique IV France · 1997 · 7
25. Guerrero · Mater. Des. · 2017 · 116 · 12710.1016/j.matdes.2016.12.003 ↗
26. A TRIP-assisted dual-phase high-entropy alloy: grain size and phase fraction effects on deformation behavior10.1016/j.actamat.2017.03.069 ↗
27. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
28. Role of Mn and Cr on structural parameters and strain energy during FCC-HCP martensitic transformation in Fe-Mn-Cr shape memory alloys10.1016/j.matdes.2017.11.017 ↗
29. Takeuchi · Mater. Trans., JIM · 2005 · 46 · 281710.2320/matertrans.46.2817 ↗
30. Hillbert · Calphad · 1978 · 2 · 22710.1016/0364-5916(78)90011-1 ↗
31. La Roca · J. Alloy. Comp. · 2016 · 688 · 59410.1016/j.jallcom.2016.07.213 ↗
32. Hashimoto · J.Phys. Soc. of Japan · 1967 · 23 N2 · 21310.1143/JPSJ.23.213 ↗