Effect of heat treatment on the microstructure, mechanical property and tribological property of plasma-sprayed high temperature lubricating composite coating from nanostructured powder
Source abstract
Abstract
Abstract The nanostructured NiCrAlY-Mo-Ag composite coating was prepared by atmospheric plasma spraying (APS). The microstructure, mechanical property and tribological property of composite coatings before and after heat treatment were investigated. The coating had the least pores and cracks, the microstructure became more homogeneous and the precipitated phase increased obviously after 500 °C heat treatment. The size of precipitates became smaller (∼10 nm) and the volume fraction increased. Meanwhile, heat treatment could effectively improve the mechanical property and tribological property of composite coatings. The composite coating had the highest adhesive strength and microhardness of 62.8 MPa and 478.8 HV as well as excellent tribological property over a wide temperature range after 500 °C heat treatment. The friction process promoted the tribo-chemical reaction and formed the Ag2MoO4, Ag2Mo2O7, NiO and NiMoO4 on the worn surface, which could act as the high temperature lubricant and effectively improved the tribological property of composite coating at high temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Tribological properties of Mo and CaF2 added SiC matrix composites at elevated temperatures10.1016/j.triboint.2017.03.003 ↗
2. Phase transformation and tribological properties of Ag-MoO3 contained NiCrAlY based composite coatings fabricated by laser cladding10.1016/j.optlastec.2017.02.006 ↗
3. Effect of copper molybdate on the lubricating properties of NiCrAlY laser clad coating at elevated temperatures10.1016/j.surfcoat.2017.01.098 ↗
4. High-temperature tribological behavior of a nickel alloy matrix solid-lubricating composite under vacuum10.1016/j.triboint.2017.02.011 ↗
5. NiCrSiBC coatings: effect of dilution on microstructure and high temperature tribological behavior10.1016/j.wear.2016.01.015 ↗
6. Microstructural and tribological characterization of NiAl matrix self-lubricating composite coatings by atmospheric plasma spraying10.1016/j.triboint.2017.01.031 ↗
7. Effect of silver vanadate on the lubricating properties of NiCrAlY laser cladding coating at elevated temperatures10.1016/j.surfcoat.2016.08.063 ↗
8. Microstructure and oxidation resistance of a NiCrAlY/Al2O3-sprayed coating on Ti-19Al-10Nb-V alloy10.1016/j.ceramint.2016.04.148 ↗
9. Preparation and characterization of NiCrAlY/nano-YSZ/PCL composite coatings obtained by combination of atmospheric plasma spraying and dip coating on Mg-Ca alloy10.1016/j.jallcom.2015.10.196 ↗
10. Tribology of NiCrAlY+Al2O3 composite coatings by plasma spraying with hybrid feeding of dry powder+suspension10.1016/j.wear.2015.10.014 ↗
11. Microstructural and morphological evaluation of MCrAlY/YSZ composite produced by mechanical alloying method10.1016/j.jallcom.2012.01.161 ↗
12. Tribological properties of adaptive NiCrAlY-Ag-Mo coatings prepared by atmospheric plasma spraying10.1016/j.surfcoat.2013.08.012 ↗
13. Friction and wear characteristics of hot-pressed NiCr-Mo/MoO3/Ag self-lubrication composites at elevated temperatures up to 900 °C10.1007/s11249-015-0491-8 ↗
14. Microstructure and tribological properties of NiCrAlY-Mo-Ag composite by vacuum hot-press sintering10.1016/j.vacuum.2017.05.024 ↗
15. Influence of microstructure on the wear and corrosion behavior of detonation sprayed Cr2O3-Al2O3 and plasma sprayed Cr2O3 coatings10.1016/j.ceramint.2017.10.203 ↗
16. Influence of composition and microstructure on the tribological property of SPS sintered MCrAlY alloys at elevated temperatures10.1016/j.jallcom.2017.12.233 ↗
17. Effects of temperature and atmosphere on microstructure and tribological properties of plasma sprayed FeCrBSi coatings10.1016/j.jallcom.2018.04.247 ↗
18. The effect of APS parameter on the microstructural, mechanical and corrosion properties of plasma sprayed Ni-Ti-Al intermetallic coatings10.1016/j.surfcoat.2016.10.051 ↗
19. Influence of heat treatments on the microstructure as well as mechanical and tribological properties of NiCrAlY-Mo-Ag coatings10.1016/j.jallcom.2016.06.075 ↗
20. Effects of vacuum heat treatment on the photoelectric work function and surface morphology of multilayered silver-metal electrical contacts10.1016/j.apsusc.2014.02.110 ↗
21. Effect of heat treatment on microstructure and mechanical properties of a graded structural material10.1016/j.msea.2014.07.036 ↗
22. Novel bilayer Zn-Ni/Ni-Co-SiC nanocomposite coating with exceptional corrosion and wear properties by pulse electrodeposition10.1016/j.jallcom.2017.12.093 ↗
23. Effect of heat treatment on structure and property evolutions of atmospheric plasma sprayed NiCrBSi coatings10.1016/j.surfcoat.2017.07.011 ↗
24. Influence of sealing post-treatments on the corrosion resistance of PEO coated AZ91 magnesium alloy10.1016/j.apsusc.2017.10.083 ↗
25. Influence of heat treatment on microstructure and mechanical properties of pulse electrodeposited Ni-W alloy coatings10.1016/j.surfcoat.2017.03.074 ↗
26. High temperature mechanical characterization of plasma-sprayed zirconia-yttria from conventional and nanostructured powders10.1016/j.surfcoat.2015.07.071 ↗
27. Microstructure and properties of nanostructured YSZ coating prepared by suspension plasma spraying at low pressure10.1016/j.surfcoat.2014.11.010 ↗
28. Adhesion strength and thermal shock properties of nanostructured 5La3TiYSZ, 8LaYSZ and 8CeYSZ coatings prepared by atmospheric plasma spraying10.1016/j.ceramint.2015.06.027 ↗
29. High mechanical and tribological performance of polyimide nanocomposites reinforced by chopped carbon fibers in adverse operating conditions10.1016/j.compscitech.2016.08.011 ↗
30. Microstructure and thermal properties of nanostructured gadolinia doped yttria-stabilized zirconia thermal barrier coatings produced by air plasma spraying10.1016/j.ceramint.2016.05.084 ↗
31. A comparison of mechanical and tribological behavior of nanostructured and conventional WC-12Co detonation-sprayed coatings10.1007/s11666-013-9901-3 ↗
32. Sliding wear behavior of Al2O3-NbC composites obtained by conventional and nonconventional techniques10.1016/j.triboint.2017.02.028 ↗
33. Microstructure, mechanical and tribological properties of plasma-sprayed NiCrAlY-Mo-Ag coatings from conventional and nanostructured powders10.1016/j.surfcoat.2017.06.034 ↗
34. Tribological properties of Ni-based self-lubricating composites with addition of silver and molybdenum disulfide10.1016/j.triboint.2012.08.014 ↗
35. Influence of isothermal heat treatment on porosity and crystallite size in axial suspension plasma sprayed thermal barrier coatings for gas turbine applications
36. Studies of the sintering kinetics of thick thermal barrier coatings by thermal diffusivity measurements10.1016/j.jeurceramsoc.2004.01.009 ↗
37. Sintering characteristics of plasma sprayed zirconia coatings containing different stabilisers10.1016/j.surfcoat.2008.09.037 ↗