Effect of twinned-structure on deformation behavior and correlated mechanical properties in a metastable β-Ti alloy
Source abstract
Abstract
Abstract A microstructure design approach, which leads to twinning-induced plasticity (TWIP) effects through twinned structures, is investigated in this study to tune deformation behavior and correlated mechanical properties in Ti–Nb based Gum Metal (Ti–23Nb-0.7Ta–2Zr-1.3O, at.%). The pre-twinned Gum Metal exhibits a pronounced improvement in uniform elongation and work hardening rate, but a lower yield strength with increasing a twin fraction in the microstructure. To shed light on the underlying deformation mechanism responsible for the mechanical response under tensile stress, a global Schmid factor and a Kernel average misorientation are evaluated from experimentally observed results by electron backscattering diffraction (EBSD) analysis. The deformation behavior of the twinned Gum Metal demonstrates that intentional introduced twins are strongly related to the overall softening behavior, and enhanced uniform ductility, attributed to well-distributed twins throughout the entire microstructure based on the ‘composite effect’.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
2. Production, microstructure and mechanical properties of cold-rolled Ti-Nb-Mo-Zr alloys for orthopedic applications10.1016/j.jallcom.2018.01.305 ↗
3. Degradation behavior of metastable β Ti-15-3 alloy for fastener applications10.1016/j.jallcom.2018.09.366 ↗
4. The bone tissue compatibility of a new Ti-Nb-Sn alloy with a low Young's modulus10.1016/j.actbio.2011.02.008 ↗
5. Design and mechanical properties of new β-type titanium alloys for implant materials10.1016/S0921-5093(97)00808-3 ↗
6. The use of titanium for medical applications in the USA10.1016/0921-5093(96)10243-4 ↗
7. Development of Ti-15Zr-Mo alloys for applying as implantable biomedical devices10.1016/j.jallcom.2018.03.308 ↗
8. Effect of heat treatment variations on the microstructure evolution and mechanical properties in a β metastable Ti alloy10.1016/j.jallcom.2016.05.225 ↗
9. Effect of precipitation on mechanical properties in the β-Ti alloy Ti-24Nb-4Zr-8Sn10.1016/j.msea.2015.12.024 ↗
10. The effect of Zr and Sn additions on the microstructure of Ti-Nb-Fe gum metals with high elastic admissible strain10.1016/j.matdes.2018.10.040 ↗
11. On the hardenability of Nb-modified metastable beta Ti-5553 alloy10.1016/j.jallcom.2016.01.142 ↗
12. Effect of oxygen content on microstructure and mechanical properties of biomedical Ti-29Nb-13Ta-4.6Zr alloy under solutionized and aged conditions10.2320/matertrans.MA200904 ↗
13. Saito · Science · 2003 · 300 · 46410.1126/science.1081957 ↗
14. Observation of yielding and strain hardening in a titanium alloy having high oxygen content10.1016/j.msea.2011.03.064 ↗
15. General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters10.1016/j.scriptamat.2006.04.022 ↗
16. Oxygen-induced lattice distortion in β-Ti3Nb and its suppression effect on β to α″ transformation10.1016/j.actamat.2014.07.060 ↗
17. Lattice modulation and superelasticity in oxygen-added β-Ti alloys10.1016/j.actamat.2011.06.015 ↗
18. Castany · 2016 · 245501
19. Evolution of deformation mechanisms of Ti-22.4Nb-0.73Ta-2Zr-1.34O alloy during straining10.1016/j.actamat.2010.01.015 ↗
20. Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate10.1016/j.actamat.2018.04.035 ↗
21. Deformation-induced variations in microstructure evolution and mechanical properties of bi-modal Ti-55511 titanium alloy10.1016/j.jallcom.2018.12.262 ↗
22. Mechanism of twinning-induced plasticity in β-type Ti-15Mo alloy10.1016/j.scriptamat.2013.05.027 ↗
23. Evading the strength-ductility trade-off dilemma in steel through gradient hierarchical nanotwins10.1038/ncomms4580 ↗
24. Observation on {332}<113> twinning-induced softening in Ti-Nb Gum metal10.1016/j.msea.2018.03.062 ↗
25. Dieter · 1986
26. Influence of oxygen content of microstructure and mechanical properties of Ti-Nb-Ta-Zr alloy10.1016/j.matdes.2010.11.049 ↗
27. Shape memory behavior of Ti-22Nb-0.5-2.0O(at%) biomedical alloys10.2320/matertrans.46.852 ↗
28. Observation of yielding and strain hardening in a titanium alloy having high oxygen content Mater10.1016/j.msea.2011.03.064 ↗
29. Aging response of the Ti–35Nb–7Zr–5Ta and Ti–35Nb–7Ta alloys10.1016/j.jallcom.2006.06.094 ↗
30. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
31. Improvement of strength-ductility in β titanium alloy through pre-strain induced twins combined with brittle ω phase10.1016/j.msea.2015.08.040 ↗
32. Twinning-induced softening in polycrystalline at moderate temperatures10.1016/j.scriptamat.2005.11.029 ↗
33. Role of deformation twinning on strain hardening in cubic and hexagonal polycrystalline metals10.1002/adem.200300320 ↗
34. A β-titanium alloy with extra high strain-hardening rate: design and mechanical properties10.1016/j.scriptamat.2015.11.020 ↗
35. Kinetics of f.c.c. deformation twinning and its relationship to stress-strain behavior10.1016/0001-6160(78)90170-0 ↗
36. The transformation of slip dislocations during twinning of copper-aluminum alloy crystals10.1051/metal/199794091037 ↗
37. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
38. Towards strength-ductility synergy though the design of heterogeneous nanostructures in metals10.1016/j.mattod.2017.02.003 ↗