journal article·2019-09

The influence of Li2O incorporation on the electrochemical properties of Li4Ti5O12 thin film electrodes

Cheng-Fan Xiao, Jong Heon Kim, Daehwan Choi, Yun Chang Park, Jung Hyun Kim, Jozeph Park, Yong Joo Kim, Hyun-Suk Kim

Publisher page

Abstract

Abstract High quality Li4Ti5O12 anode films were deposited by radio-frequency co-sputtering Li4Ti5O12 and Li2O targets on Pt-coated stainless steel substrates. The use of an additional Li2O target not only compensated the lithium content in the resulting layers but also decreased the impurity content. Consequently, the electrochemical properties of the Li4Ti5O12 anode exhibited better electrochemical properties than an identical film prepared using a single Li4Ti5O12 target. Upon annealing, the co-sputtering Li4Ti5O12 showed a relatively high discharge capacity of 618 mAh/cm3 (theoretical specific capacity of 598.5 mAh/cm3) at a current density of 0.1 C. Also, superior high rate capability with a discharge capacity of 309 mAh/cm3 at 20 C was observed, accompanied by an excellent cycling stability, with a capacity retention ratio exceeding 94% after 500 cycles at 1 C. The co-sputtering using Li2O target is most likely to have enhanced the electrochemical properties of the pure Li4Ti5O12 anode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Nanomaterials for rechargeable lithium batteries10.1002/anie.200702505 ↗
3. Ideal three-dimensional electrode structures for electrochemical energy storage10.1002/adma.201305095 ↗
4. Nanostructured materials for advanced energy conversion and storage devices10.1038/nmat1368 ↗
5. Chemical diffusion coefficient of lithium in titanium disulfide single crystals10.1149/1.2085952 ↗
6. Thin-film rechargeable lithium batteries10.1016/0378-7753(94)02040-A ↗
7. Effect of annealing temperature on the interfacial interaction of LiNi0.5Mn1.5O4 thin film cathode with stainless-steel substrate
8. Li-alloy based anode materials for Li secondary batteries10.1039/b919877f ↗
9. Thermal behavior of a C∕ LiCoO2 cell, its components, and their combinations and the effects of electrolyte additives10.1149/1.2347100 ↗
10. Scalable synthesis of Fe3O4/C composites with enhanced electrochemical performance as anode materials for lithium-ion batteries10.1016/j.jallcom.2013.08.098 ↗
11. Electrospun conformal Li4Ti5O12/C fibers for high-rate lithium-ion batteries
12. Alumina-coated patterned amorphous silicon as the anode for a lithium-ion battery with high Coulombic efficiency10.1002/adma.201102568 ↗
13. Increased cycling efficiency and rate capability of copper-coated silicon anodes in lithium-ion batteries10.1016/j.jpowsour.2010.06.043 ↗
14. Electrochemical properties of LiFePO4 thin films prepared by pulsed laser deposition10.1016/j.jpowsour.2005.03.117 ↗
15. Lithium diffusion in sputter-deposited Li4Ti5O12 thin films10.1016/j.jpowsour.2012.04.102 ↗
16. Challenges of spinel Li4Ti5O12 for lithium-ion battery industrial applications10.1002/aenm.201601625 ↗
17. Li4Ti5O12-based energy conversion and storage systems: status and prospects10.1016/j.ccr.2017.05.006 ↗
18. Lithium storage in Li4Ti5O12 spinel: the full static picture from electron microscopy10.1002/adma.201200450 ↗
19. In situ growth of Li4Ti5O12 on multi-walled carbon nanotubes: novel coaxial nanocables for high rate lithium ion batteries10.1039/C0JM02316G ↗
20. Highly improved rate capability for a lithium-ion battery nano-Li4Ti5O12 negative electrode via carbon-coated mesoporous uniform pores with a simple self-assembly method10.1002/adfm.201101123 ↗
21. Electrostatic assembly of mesoporous Li4Ti5O12/graphenehybrid as high-rate anode materials10.1016/j.scriptamat.2013.02.049 ↗
22. A comprehensive review of Li4Ti5O12-based electrodes for lithium-ion batteries: the latest advancements and future perspectives10.1016/j.mser.2015.10.001 ↗
23. Preparation and rate capability of Li4Ti5O12 hollow-sphere anode material10.1016/j.jpowsour.2007.01.065 ↗
24. Effect of particle dispersion on high rate performance of nano-sized Li4Ti5O12 anode10.1016/j.electacta.2007.04.070 ↗
25. Chemical vapor deposition and atomic layer deposition for advanced lithium ion batteries and supercapacitors10.1039/C5EE01254F ↗
26. Preparation and electrochemical properties of Li4Ti5O12 thin film electrodes by pulsed laser deposition10.1016/j.jpowsour.2009.03.074 ↗
27. Measurements of stress and fracture in germanium electrodes of lithium-ion batteries during electrochemical lithiation and delithiation10.1016/j.jpowsour.2015.11.036 ↗
28. Study on the preparation and properties of Li4Ti5O12 powder10.4028/www.scientific.net/AMM.217-219.759 ↗
29. Rutile-TiO2 nanocoating for a high-rate Li4Ti5O12 anode of a lithiumion battery10.1021/ja301266w ↗
30. A Li4Ti5O12-rutile TiO2 nanocomposite with an excellent high rate cycling stability for lithium ion batteries10.1039/C5NJ00306G ↗
31. Chemical and electrochemical Li-insertion into the Li4Ti5O12 spinel10.1021/cm0488837 ↗
32. Single-layer graphene-wrapped Li4Ti5O12 anode with superior lithium storage capability10.1016/j.carbon.2016.12.022 ↗
33. Aluminium–aluminium nitride cermet films: preparation by co-sputtering and microstructure10.1016/S0257-8972(97)00527-6 ↗
34. {111} faceted Li4Ti5O12 octahedra as the reference electrode material in a nanostructured potentiometric CO2 sensor10.1039/C6TA05013A ↗
35. Solid state bonding of Zircaloy-2 with stainless steel10.1016/0022-3115(86)90257-6 ↗
36. Diffusion bonding of titanium to 304 stainless steel10.1016/j.jnucmat.2003.07.004 ↗
37. Diffusion bonding of Ti coated Zircaloy-4 and 316-L stainless steel10.1016/j.matchar.2008.08.009 ↗
38. Partial transient liquid phase diffusion bonding of Zircaloy-4 to stabilized austenitic stainless steel 32110.1016/j.matchar.2010.06.010 ↗
39. Amorphous Li4Ti5O12 thin film with enhanced lithium storage capability and reversibility for lithium-ion batteries10.1002/ente.201402047 ↗
40. Mesoporous Li4Ti5O12 hollow spheres with enhanced lithium storage capability10.1002/adma.201204912 ↗
41. Study of irreversible capacities for Li insertion in hard and graphitic carbons10.1149/1.1837572 ↗
42. Reduction of irreversible capacities of amorphous carbon materials for lithium ion battery anodes by Li2CO3 addition10.1016/j.carbon.2004.01.062 ↗
43. Electrochemical performance of graphene nanosheets as anode material for lithium-ion batteries10.1016/j.elecom.2009.04.036 ↗