Molecular dynamic study on the deformation mechanism based on strain rate, solute atomic concentration and temperature in dual-phase equiaxial nanocrystalline AgCu alloy
Source abstract
Abstract
Abstract Nanocrystalline (NC) AgCu alloys have been attracted significant attention because of excellent electrical and mechanical properties. The microstructural evolution and deformation mechanisms are still challenging issues, and it is hard to observe directly by experimental methods. Accordingly, in this paper, atomic simulations are performed to investigate the tensile behavior of dual-phase equiaxial NC AgCu alloy (DPEA) at different strain rate (104-107 s−1), solute atomic concentration (5–20%) and temperature (300–600 K) using embedded atom method (EAM) potential. Relevant stress-strain curves and yield stress have been obtained. Result analysis reveals dislocation motion, atomic diffusion and grain boundary (GB) sliding are dominating deformation mechanisms. With the increase of strain rate and deformation, main deformation mechanisms are discovered to change from dislocation motion to GB sliding. Furthermore, the increase of solute atomic concentration (SAC) and temperature will promote the atomic diffusion and GB sliding. This work explains evolution process on deformation mechanisms of DPEA. It provides a qualitative analysis to design excellent mechanism property of DPEA by means of optimizing material structure parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Nanocrystalline materials10.1016/0079-6425(89)90001-7 ↗
2. Nanomechanics of Hall–Petch relationship in nanocrystalline materials10.1016/j.pmatsci.2009.03.008 ↗
3. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
4. Revealing the maximum strength in nanotwinned copper10.1126/science.1167641 ↗
5. A gradient nanostructure generated in pure copper by platen friction sliding deformation10.1016/j.scriptamat.2016.02.007 ↗
6. Microstructural evolution and mechanical properties of a two-phase Cu–Ag alloy processed by high-pressure torsion to ultrahigh strains10.1016/j.actamat.2011.01.017 ↗
7. Molecular-dynamics simulation of grain-boundary diffusion creep10.1023/A:1008664218857 ↗
8. Molecular dynamics simulation of micro-mechanical deformations in polycrystalline copper with bimodal structures10.1016/j.matlet.2016.07.122 ↗
9. Investigating the deformation of nanocrystalline copper with microscale kinematic metrics and molecular dynamics10.1016/j.jmps.2011.11.007 ↗
10. A comparative study on melting of core–shell and Janus Cu–Ag bimetallic nanoparticles10.1016/j.commatsci.2014.12.007 ↗
11. Tensile properties of nanocrystalline tantalum from molecular dynamics simulations10.1016/j.actamat.2008.03.025 ↗
12. Atomistic simulation study of tensile deformation in nanocrystalline and single-crystal Au10.1007/s00894-017-3295-y ↗
13. Alloying effects on the microstructure and mechanical properties of nanocrystalline Cu-based alloyed thin films: miscible Cu-Ti vs immiscible Cu-Mo10.1016/j.actamat.2017.09.039 ↗
14. From solid solutions to fully phase separated interpenetrating networks in sputter deposited “immiscible” W–Cu thin films10.1016/j.actamat.2015.07.050 ↗
15. Grain boundary segregation, chemical ordering and stability of nanocrystalline alloys: atomistic computer simulations in the Ni–W system10.1016/j.actamat.2007.03.024 ↗
16. Phosphorus segregation in nanocrystalline Ni–3.6 at.% P alloy investigated with the tomographic atom probe (TAP)10.1016/S1359-6454(99)00397-3 ↗
17. Tungsten content and grain boundary misorientation angle effect on crack blunting in nanocrystalline Ni-W alloy10.1007/s11051-017-4111-4 ↗
18. Molecular dynamics study of solute strengthening in Al/Mg alloys10.1016/j.jmps.2005.12.008 ↗
19. Plimpton · 1995
20. Atomsk: a tool for manipulating and converting atomic data files10.1016/j.cpc.2015.07.012 ↗
21. Strain localization in a nanocrystalline metal: atomic mechanisms and the effect of testing conditions10.1063/1.4815965 ↗
22. Visualization and analysis of atomistic simulation data with OVITO–the open visualization tool10.1088/0965-0393/18/1/015012 ↗
23. The experimental investigation and modeling on the mechanical behavior of dual-phase approximate equiaxial nanocrystalline AgCu alloy10.1016/j.msea.2018.07.091 ↗
24. Cu/Ag EAM potential optimized for heteroepitaxial diffusion from ab initio data10.1016/j.commatsci.2009.09.026 ↗
25. Molecular dynamics study on the equal biaxial tension of Cu/Ag bilayer films10.1016/j.apsusc.2013.05.150 ↗
26. Atomistic simulation of single crystal copper nanowires under tensile stress: influence of silver impurities in the emission of dislocations10.1016/j.commatsci.2014.02.014 ↗
27. Temperature-based plastic deformation mechanism of Cu/Ag nanocomposites: a molecular dynamics study10.1016/j.commatsci.2017.12.041 ↗
28. Deformation mechanism transition caused by strain rate in a pulse electric brush-plated nanocrystalline Cu10.1063/1.2973200 ↗
29. Strain-rate sensitivity, activation volume and mobile dislocations exhaustion rate in nanocrystalline Cu–11.1at%Al alloy with low stacking fault energy10.1016/j.msea.2014.05.093 ↗
30. Solid solution effects on hardness and strain rate sensitivity of nanocrystalline NiFe alloy10.1016/j.msea.2016.08.120 ↗
31. Grain boundary diffusion of 59Fe in high-purity copper10.1016/j.actamat.2018.11.060 ↗
32. Observation of atomic diffusion at twin-modified grain boundaries in copper10.1126/science.1160777 ↗
33. Grain boundary induced deformation mechanisms in nanocrystalline Al by molecular dynamics simulation: from interatomic potential perspective10.1016/j.commatsci.2018.10.021 ↗
34. Molecular dynamics study on the grain size, temperature, and stress dependence of creep behavior in nanocrystalline nickel10.1007/s10853-016-0506-3 ↗