Effect of twin boundary-dislocation and twin boundary-solute atom interaction on detwinning of Mg-2Gd-2Y-0.3Zr alloy
Source abstract
Abstract
Abstract In the present work, the effect of twin boundary-dislocation and twin boundary-solute atom interaction on detwinning of Mg-2Gd-2Y-0.3Zr alloy has been investigated by annealing treatment and change of loading path. The results show that when the samples were precompressed along transverse direction (TD), unloading, and then recompressed along normal direction (ND), the detwinning is the predominant deformation. However, when the samples precompressed along ND were recompressed along TD, the detwinning of {10 1 ¯ 1}–{10 1 ¯ 2} double twin is observed difficultly. The {10 1 ¯ 2} detwinning can also be suppressed completely if the samples precompressed along TD were annealed and then recompressed along ND. This should be resulted from the segregation of Gd and Y solute atoms at twin boundary during annealing. Thus, the yield strength of the presompressed and annealing samples is increased by about 100 MPa compared with the presompressed samples without annealing during recompressing along ND.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Low-temperature electrical resistivity and thermal conductivity of binary magnesium alloys10.1016/j.actamat.2014.07.063 ↗
2. Conversion coating on magnesium alloy sheet (AZ31) by vanillic acid treatment: preparation, characterization and corrosion behavior10.1016/j.jallcom.2017.12.115 ↗
3. Effect of the second phases on corrosion behavior of the Mg-Al-Zn alloys10.1016/j.jallcom.2016.11.100 ↗
4. Optimum parameters and kinetic analysis for hot working of a solution-treated Mg-Zn-Y-Mn magnesium alloy10.1016/j.jallcom.2018.04.292 ↗
5. Investigation on the yield behavior of AZ91 magnesium alloy10.1016/j.jallcom.2017.12.160 ↗
6. Characterization of mechanical properties and nano-porous structure of Aluminium-Magnesium alloy during multi-axial tensile deformation: an atomistic investigation10.1016/j.jallcom.2018.01.024 ↗
7. Improvement of mechanical behaviors of a superlight Mg-Li base alloy by duplex phases and fine precipitates10.1016/j.jallcom.2017.12.025 ↗
8. Effect of Zn/Mg ratios on SCC, electrochemical corrosion properties and microstructure of Al-Zn-Mg alloy10.1016/j.jallcom.2018.05.063 ↗
9. Twinning–detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A10.1016/j.actamat.2007.10.030 ↗
10. A measure of plastic anisotropy for hexagonal close packed metals: application to alloying effects on the formability of Mg10.1016/j.jallcom.2016.10.287 ↗
11. Phase boundary sliding of a reticular-structured Mg-O-9Al alloy10.1016/j.jallcom.2018.04.039 ↗
12. Effect of extrusion temperature on microstructure, thermal conductivity and mechanical properties of a Mg-Ce-Zn-Zr alloy10.1016/j.jallcom.2018.01.203 ↗
13. Effects of asymmetric feeder on microstructure and mechanical properties of high strength Al-Zn-Mg alloy by hot extrusion10.1016/j.jallcom.2018.03.188 ↗
14. Twin-twin interactions and contraction twin formation in an extruded magnesium alloy subjected to an alteration of compressive direction10.1016/j.jallcom.2017.12.043 ↗
15. Modeling of {101¯2}-{101¯2} secondary twinning in pre-compressed Mg alloy AZ3110.1016/j.jallcom.2017.07.133 ↗
16. VPSC-TDT modeling and texture characterization of the deformation of a Mg-3Al-1Zn plate10.1016/j.jallcom.2017.03.243 ↗
17. Twinning-detwinning behavior during fatigue-crack propagation in a wrought magnesium alloy AZ31B10.1016/j.msea.2012.06.088 ↗
18. Polycrystal modeling of tensile twinning in a Mg alloy during cyclic loading10.1016/j.scriptamat.2012.07.008 ↗
19. Bettles · 2012
20. Mechanical anisotropy improvement in ultrafine-grained ZK61 magnesium alloy rods fabricated by cyclic extrusion and compression10.1016/j.msea.2014.02.031 ↗
21. The different effects of solute segregation at twin boundaries on mechanical behaviors of twinning and detwinning10.1016/j.msea.2015.07.049 ↗
22. Microstructure, texture and mechanical properties evolution of pre-twinning Mg alloys sheets during large strain hot rolling10.1016/j.msea.2015.12.059 ↗
23. A new annealing hardening mechanism in pre-twinned Mg-3Al-1Zn alloy10.1016/j.msea.2015.12.046 ↗
24. The effects of pre-strain and subsequent annealing on the yielding behavior in a rolled magnesium alloy AZ3110.1007/s11665-014-1284-1 ↗
25. Annealing hardening in detwinning deformation of Mg-3Al-1Zn alloy10.1016/j.msea.2013.11.080 ↗
26. Microstructure characterization and high-temperature shear strength of the Mg–10Gd–3Y–1.2Zn–0.5Zr alloy in the as-cast and aged conditions10.1016/j.jallcom.2014.09.102 ↗
27. Effect of rare earth elements on deformation behavior of an extruded Mg–10Gd–3Y–0.5Zr alloy during compression10.1016/j.matdes.2012.10.040 ↗
28. Microstructure and thermal stability of nanocrystalline Mg-Gd-Y-Zr alloy processed by high pressure torsion10.1016/j.jallcom.2017.05.164 ↗
29. The origin of “Rare Earth” texture development in extruded Mg-based alloys and its effect on tensile ductility10.1016/j.msea.2008.05.045 ↗
30. Micro-alloying Mg with Y, Ce, Gd and La for texture modification—a comparative study10.1016/j.msea.2009.12.036 ↗
31. Microstructure and texture variation with Gd addition in extruded magnesium10.1016/j.jallcom.2016.10.179 ↗
32. Twinning behavior of a strongly basal textured AZ31 mg alloy during warm rolling10.1016/j.actamat.2011.12.017 ↗
33. Effect of temperature on microstructures, texture and mechanical properties of hot rolled pure Mgsheets10.1016/j.msea.2013.01.036 ↗
34. The effect of Y, Ce and Gd on texture, recrystallization and mechanical property of Mg–Zn alloys10.1016/j.jma.2016.07.001 ↗
35. The texture and anisotropy of magnesium–zinc–rare earth alloy sheets10.1016/j.actamat.2006.11.013 ↗
36. Microstructures and textures of pure magnesium deformed in plane-strain compression10.1016/j.scriptamat.2004.07.002 ↗
37. Texture evolution of rolled Mg–3Al–1Zn alloy undergoing a {101¯2} twinning dominant strain path change10.1016/j.jallcom.2015.05.194 ↗
38. The influence of a secondary twin on the detwinning deformation of a primary twin in Mg–3Al–1Zn alloy10.1016/j.msea.2014.03.068 ↗
39. Hardening evolution of AZ31B Mg sheet10.1016/j.ijplas.2006.03.005 ↗
40. Internal stress relaxation and load redistribution during the twinning-detwinning-dominated cyclic deformation of a wrought magnesium alloy, ZK60A10.1016/j.actamat.2008.04.006 ↗
41. The role of twinning and untwining in yielding behavior in hot-extruded Mg-Al-Zn alloy10.1016/j.actamat.2006.09.010 ↗
42. Twinning behavior of a strongly basal textured AZ31 Mg alloy during warm rolling10.1016/j.actamat.2011.12.017 ↗
43. Double twinning mechanisms in magnesium alloys via dissociation of lattice dislocations10.1098/rspa.2011.0731 ↗
44. Effect of dislocation-twin boundary interaction on deformation by twin boundary migration10.1016/j.msea.2016.03.061 ↗
45. Enhancing the effect of texture control using {101¯2} twins by retarding detwinning activity in rolled Mg–3Al–1Zn alloy10.1016/j.scriptamat.2013.09.002 ↗
46. Periodic segregation of solute atoms in fully coherent twin boundaries10.1126/science.1229369 ↗
47. Annealing strengthening of pre-deformed Mg-10Gd-3Y-0.3Zr alloy10.1016/j.jallcom.2015.04.102 ↗
48. Twin-boundary segregation energies and solute-diffusion activation enthalpies in Mg-based binary systems: a first-principles study10.1016/j.scriptamat.2014.02.004 ↗