journal article·2018-04

Infiltration behavior of molten Mg and its influence on microstructural evolution in SiC-doped MgB2 wires prepared by internal Mg diffusion process

Yusuke Shimada, Satoshi Hata, Ken-ichi Ikeda, Hideharu Nakashima, Akiyoshi Matsumoto, Kazumasa Togano, Hiroaki Kumakura

Publisher page

Abstract

Abstract We elucidate the microstructural evolution in MgB2 wires fabricated at two different temperatures by the internal Mg diffusion (IMD) method via multiple-scale microstructural observations. The critical current (Ic) of MgB2 wire was enhanced by the IMD method; however, the Ic of MgB2 was not sufficiently high to allow its practical applications. To prepare MgB2 by the IMD method, molten Mg is required to infiltrate the gaps between the B grains and penetrate each B grain. Here, we suggest that controlling the infiltration and penetration behaviors of Mg are key to enhancing the Ic of MgB2 fabricated by the IMD method. One reason for the decrease in Ic is the existence of residual B grains in the MgB2 crystalline region, which has an area fraction of 25% even in the MgB2 wire exhibiting the highest Ic. The amount of residual B grains, which formed due to the insufficient penetration distance of Mg atoms in the B grain, decreased after high-temperature treatment. However, the microstructure of the MgB2 wire fabricated at a temperature higher than the melting point of Mg was non-uniform because Mg infiltrated the gap between the B grains rapidly and non-uniformly. Thus, optimization of heat treatment temperature can effectively control the infiltration and penetration of Mg in the B grains, yielding uniform microstructures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Superconductivity in MgB2 and Alloys · Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Superconductivity at 39 K in magnesium diboride10.1038/35065039 ↗
2. Thermodynamic and transport properties of superconducting MgB210.1103/PhysRevLett.86.2420 ↗
3. Effect of SiO2 and SiC doping on the powder-in-tube processed MgB2 tapes10.1088/0953-2048/16/8/317 ↗
4. Enhancement of the critical current density and flux pinning of MgB2 superconductor by nanoparticle SiC doping10.1063/1.1517398 ↗
5. Carbohydrate doping to enhance electromagnetic properties of MgB2 Superconductors
6. Essential factors for the critical current density in superconducting MgB2: connectivity and flux pinning by grain boundaries10.1088/0953-2048/21/01/015008 ↗
7. Limiting factors of normal-state conductivity in superconducting MgB2: an application of mean-field theory for a site percolation problem10.1088/0953-2048/20/7/012 ↗
8. High performance new MgB2 superconducting hollow wires10.1088/0953-2048/16/2/328 ↗
9. High density MgB2 obtained by reactive liquid Mg infiltration10.1142/S0217979203016091 ↗
10. Synthesis of high Jc MgB2 bulks with high reproducibility by a modified powder-in-tube method10.1088/0953-2048/17/7/016 ↗
11. Fabrication of seven-core multi-filamentary MgB2 wires with high critical current density by an internal Mg diffusion process10.1088/0953-2048/22/1/015003 ↗
12. Microstructures and critical currents of single- and multi-filamentary MgB2 superconducting wires fabricated by an internal Mg diffusion process10.1088/0953-2048/23/8/085002 ↗
13. Flux pinning properties of MgB2 thin films on Al tape substrates deposited by electron beam evaporation10.1016/j.physc.2011.05.144 ↗
14. Microstructure in high-density MgB2 wires prepared by an internal Mg diffusion method10.1109/TASC.2010.2091097 ↗
15. Electron microscopy observations of MgB2 wire prepared by an internal Mg diffusion method10.1016/j.physc.2011.05.143 ↗
16. Effect of cold isostatic pressing on the transport current of filamentary MgB2 wire made by the IMD process10.1088/0953-2048/29/7/075004 ↗
17. Microstructures of MgB2/Fe tapes fabricated by an in situ powder-in-tube method using MgH2 as a precursor powder10.1088/0953-2048/19/2/002 ↗
18. Superconducting properties and microstructure of MgB2 wires synthesized with a low-temperature diffusion process10.1088/0953-2048/20/12/017 ↗
19. Influence of heat treatment on superconductivity of MgB2 bulk sintered in flowing welding grade Ar atmosphere10.1109/TMAG.2009.2018924 ↗
20. Mechanical and superconducting properties of PIT-processed MgB2 wire after heat treatment10.1088/0953-2048/16/9/315 ↗
21. MgB2 multicore wire prepared by IMD technology—investigation of the MgB2 layer formation during annealing10.1109/TASC.2017.2652719 ↗
22. Quantitative electron microscopy and spectroscopy of MgB2 wires and tapes10.1088/0953-2048/21/7/073001 ↗
23. Effect of processing variables on the reaction kinetics of MgB2 fibers10.1016/j.physc.2010.06.007 ↗
24. In situ X-ray synchrotron diffraction study of MgB2 synthesis from elemental powders10.1016/j.actamat.2007.12.014 ↗
25. B-Mg
26. Fabrication of MgB2 superconducting wires with a hybrid method combining internal-Mg-diffusion and powder-in-tube processes10.1088/0953-2048/27/5/055017 ↗
27. Microscopic role of carbon on MgB2 wire for critical current density comparable to NbTi10.1038/am.2012.3 ↗
28. Novel nanometer-level uniform amorphous carbon coating for boron powders by direct pyrolysis of coronene without solvent10.1088/0957-4484/26/4/045602 ↗
29. Further increase of the critical current density of MgB2 tapes with nanocarbon-doped mechanically alloyed precursor10.1088/0953-2048/21/6/062001 ↗