Phase formation during high-energy ball milling of the 33Al-45Cu-22Fe (at.%) powder mixture
Source abstract
Abstract
Abstract The process of mechanical alloying in the 33Al-45Cu-22Fe (at.%) powder mixture subjected to high-energy ball milling was studied. Due to complexity of the alloy formation in this system, several methods – X-ray diffraction phase analysis, Differential Dissolution, thermal analysis and Transmission and Scanning Electron Microscopy – were combined to obtain the detailed information on the structure and composition of the mechanical alloying products. Possible formation mechanisms of these phases during mechanical alloying are discussed. No crystalline phase containing Fe and Cu, Al has been found in the products of mechanical alloying of the 33Al-45Cu-22Fe mixture. The formation of Cu-Al phases followed the sequence of Al2Cu → Al4Cu9 → Cu(Al) solid solution. When only those phases that were detected by the XRD analysis were taken into account, the mass balance of Al and Fe in the products of mechanical alloying was not satisfied. The Differential Dissolution and high-resolution Transmission Electron Microscopy data suggest the formation of non-stoichiometric X-ray amorphous phases containing all three elements. Reasons for the retardation of the solid-state interaction between aluminum and copper in the ternary powder mixture are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Quasicrystal Structures and Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Metallic phase with long-range orientational order and No translational symmetry10.1103/PhysRevLett.53.1951 ↗
2. An investigation on the transformation of the icosahedral phase in the Al-Fe-Cu system during mechanical milling and subsequent annealing10.1080/01418610208239629 ↗
3. Enthalpy of formation of quasicrystalline phase and ternary solid solutions in the Al-Fe-Cu system10.1016/S1001-0521(06)60107-1 ↗
4. Microstructure, fabrication and properties of quasicrystalline Al–Cu–Fe alloys: a review10.1016/S0925-8388(03)00445-6 ↗
5. Mechanical alloying and self-propagating high-temperature synthesis of stable icosahedral quasicrystals10.1016/j.jallcom.2007.07.015 ↗
6. Thermal stability of ball milled Al/Al-Cu-Fe quasicrystal metal matrix composites
7. Structure, microhardness and damping characteristics of Al matrix composite reinforced with AlCuFe or Ti using ultrasonic impact peening10.1016/j.surfcoat.2009.10.009 ↗
8. Comparison of Al-Cu-Fe quasicrystalline particle reinforced Al composites fabricated by conventional casting and extrusion10.1023/A:1004875824039 ↗
9. Microstructures and mechanical properties of Al-base composite materials reinforced by Al–Cu–Fe particles10.1016/j.jallcom.2009.12.124 ↗
10. On icosahedral phase formation in mechanically alloyed Al70Cu20Fe1010.1016/S0921-5093(00)01200-4 ↗
11. A novel catalyst fabricated from Al–Cu–Fe quasicrystal for steam reforming of methanol10.1016/j.cattod.2005.11.003 ↗
12. Evolution of microstructure induced by calcination in leached Al–Cu–Fe quasicrystal and its effects on catalytic activity10.1007/s10853-010-5063-6 ↗
13. Development of chromium-free iron-based catalysts for high-temperature water-gas shift reaction10.1016/j.molcata.2006.07.013 ↗
14. Water gas shift Catalysis10.1080/01614940903048661 ↗
15. Preparation of porous ceramometal composites through the stages of mechanical activation and hydrothermal partial oxidation of Me-Al powders10.1016/j.cattod.2014.12.009 ↗
16. Formation of intermetallic phases during mechanical alloying and annealing of Cr + 20 wt % al mixtures10.1134/S0020168508060083 ↗
17. Phase evolution during early stages of mechanical alloying of Cu-13wt.%Al powder mixtures in a high-energy ball mill10.1016/j.jallcom.2014.12.120 ↗
18. Studies of X-ray amorphous phase in mechanochemical synthesis of iron silicides from elements10.1016/S0925-8388(00)00832-X ↗
19. CrAl alloy-based cermet monolith with polymodal pore structure for partial oxidation of methane to synthesis gas
20. Properties of porous FeAlOy/FeAlx ceramic matrix composite influenced by mechanical activation of FeAl powder10.1007/s12034-013-0594-5 ↗
21. Stoichiography as applied to studying composition and real structure of catalysts10.1016/S1381-1169(00)00058-3 ↗
22. Methodology and procedure of the stoichiographic analysis of solid inorganic substances and materials10.1134/S1061934811030117 ↗
23. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
24. Solid-state reactions between Cu and Al during mechanical alloying and heat treatment10.1016/S0925-8388(00)01094-X ↗
25. Formation mechanism of Fe3Al and FeAl intermetallic compounds during mechanical alloying10.1007/s10853-005-0718-4 ↗
26. Crystallization kinetics of Al-Fe and Al-Fe-Y amorphous alloys produced by mechanical milling
27. Phase transformations during mechanical alloying of Fe–50% Al and subsequent heating of the milling product10.1016/j.jallcom.2005.12.077 ↗
28. Crystallite size and strain study of a nanostructured Fe-Cu alloy from diffraction profile analysis10.4028/www.scientific.net/JMNM.20-21.648 ↗
29. Concentration dependence of hyperfine parameters of Fe-Cu alloys10.4028/www.scientific.net/JMNM.22.97 ↗