journal article·2017-12

Boron and sodium co-doped ZnO varistor with high stability of pulse current surge

Jinlou Shen, Shenglin Jiang, Yuchun Xu, Mingyu Li, Shuai Zhu, Zhibiao Chen, Xiafang Lin, Huan Liu, Honglang Li, Guangzu Zhang

Publisher page

Abstract

Abstract The effect of boron and sodium co-doping on the stability of ZnO varistors subjected to large pulse-current surges was investigated. The relationship among the microstructure, phase composition, electric properties and pulse-current aging behavior were systematically discussed. No additional phase is generated with the co-doping of boron and sodium ions. The energy dispersive spectroscopy (EDS) analysis confirms that sodium ions can permeate into the grains and occupy the interstitial sites, while the boron ions stay at the grain boundary to form glass phase and decrease the concentration of the interstitial defect. Moreover, the co-doping behavior leads to a trend that the grain size increases firstly and then decrease, which is the main reason for the change in the breakdown field ( E 1mA/cm 2 ). The result reveals that with 0.24 mol% B 3+ , E 1mA/cm 2 increases to a maximum value of 4187 V/cm and then decreases drastically with increasing content of Na + dopant from 0.12 to 0.48 mol%. Meanwhile, the nonlinear coefficient of the samples decreases and the leakage current increases with the increase of Na + content. The varistor doped with 0.24 mol% Na + and 0.24 mol% B 3+ exhibits the optimum I-V stability. After subjecting to a surge current of 6000 A, the variation rate of the breakdown field (%Δ E 1mA/cm 2 ) is −2.6%, which is almost five times lower than that of the sample without boron and sodium. In addition, the ZnO varistor with the B/Na ratio of 0.24/0.24 shows much better stability compared to the samples added with B 3+ or Na + singly. The finding of this study provides an effective method for improving the protective effect of surge protection equipment and the stability of power systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High voltage insulation and dielectric phenomena · Lightning and Electromagnetic Phenomena · Electrical Fault Detection and Protection

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Temperature dependence of zinc oxide grain resistivity in ZnO varistor ceramics10.1016/j.jallcom.2015.10.046 ↗
2. Zinc oxide-from synthesis to application: a review10.3390/ma7042833 ↗
3. Electrical degradation of double-Schottky barrier in ZnO varistors
4. Effect of Zn doping on stability of ZnO varistors under high pulse current stress10.1016/j.ceramint.2015.05.120 ↗
5. Improved stability of the ZnO varistor via donor and acceptor doping at the grain boundary10.1557/JMR.1988.0745 ↗
6. Zinc interstitial as a universal microscopic origin for the electrical degradation of ZnO-based varistors under the combined DC and temperature condition10.1016/j.jeurceramsoc.2017.04.039 ↗
7. Relation between grain boundary structure and electrical degradation in zinc oxide varistors10.1111/j.1551-2916.2012.05212.x ↗
8. Improving age stability and energy absorption capabilities of ZnO varistors ceramics10.1016/j.ceramint.2016.08.057 ↗
9. The clamp characteristics and DC aging behavior of ZnO-based varistor ceramics doped with Na2CO310.1016/j.ceramint.2015.09.069 ↗
10. Influence of B2O3 additives on microstructure and electrical properties of ZnO-Bi2O3-Sb2O3-based varistors10.1016/j.jallcom.2010.10.074 ↗
11. Low-temperature sintering and electrical properties of ZnO-Bi2O3-TiO2-Co2O3-MnCO3-based varistor with Bi2O3-B2O3 frit for multilayer chip varistor applications10.1111/j.1551-2916.2010.03866.x ↗
12. Microstructural and electrical properties of multicomponent varistor ceramic with PbO-ZnO-B2O3 glass addition10.1007/s10832-007-9023-8 ↗
13. Na2CO3 doping effect on ZnO-Pr6O11-Co3O4 ceramic varistor properties10.1016/j.jallcom.2013.01.047 ↗
14. Electrical and dielectric properties of Na-doped ZnO varistors
15. Improvement of nonlinear properties and electrical stability of ZnO varistor with B2O3 additives by nano-coating method10.1111/j.1551-2916.2011.04900.x ↗
16. Construction of master sintering curves to understand the effect of Na addition on ZnO-based varistors10.1016/j.jeurceramsoc.2015.07.014 ↗
17. Sodium impurities in ZnO-Bi2O3-Sb2O3 based varistors10.1016/j.ceramint.2010.10.016 ↗
18. Electrical properties and kinetic of crystalline grain growth of low-voltage ZnO varistor with Zn-B glass10.3724/SP.J.1077.2010.00157 ↗
19. Lineal intercept technique for measuring grain size in two-phase polycrystalline ceramics10.1111/j.1151-2916.1972.tb11224.x ↗
20. Navarro · 2003
21. High-current measurement of the grain resistivity in zinc oxide varistor ceramics10.1016/j.ceramint.2013.01.072 ↗
22. Characteristics of ZnO-based varistor ceramics doped with Al2O310.1016/j.jeurceramsoc.2007.02.176 ↗
23. The role of Ga partial substitution for Al in the enhanced conductivity of transparent AZO thin film10.1016/j.jallcom.2016.12.248 ↗
24. Electrical and dielectric properties of Na-doped ZnOvaristors