Tensile properties of Co-based oxide dispersion strengthened superalloys
Source abstract
Abstract
Tensile properties of a novel Co-20Cr-5Al-2.4Hf-1.5Y(2)O(3) (wt%) oxide dispersion strengthened (ODS) superalloy were studied through a comparing investigation with Co-20Cr-5Al (wt%) alloy. Both the Co-based alloys (with and without oxide particles) were fabricated by mechanical alloying (MA), spark plasma sintering (SPS), hot rolling and the final annealing at 1200 degrees C. Due to the ultrafine grains of 500 nm in the ODS superalloy and 1.2 mu m in the ODS free alloy, the metastable fcc structure predominates at room temperature. Tensile testing was conducted at room temperature and 1000 degrees C. Strain-induced twinning deformation was evidenced by transmission electron microscopy and was found to significantly enhance the ultimate tensile strength (UTS) of the two alloys at room temperature. The Co-based ODS superalloy exhibits a superior tensile strength of 2.85 GPa at room temperature, which is associated with the distribution of twins and fine Y-Hf oxides. At 1000 degrees C, since the ultrafine grain size in the ODS superalloys, an easy grain boundary deformation occurred and resulted in a significant reduction in the UTS value. (C) 2017 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Cobalt-based superalloys for applications in gas turbines10.1016/0025-5416(87)90061-9 ↗
2. Bilbrey · 1962 · 3
3. Perspective of ODS alloys application in nuclear environments10.1016/S0022-3115(02)01043-7 ↗
4. Production and properties of nano-scale oxide dispersion strengthened (ODS) 9Cr martensitic steel claddings10.2355/isijinternational.43.2038 ↗
5. Microstructural characterization of Co-based ODS alloys10.1007/s11665-012-0206-3 ↗
6. Influence of service-induced microstructural changes on the failure of a cobalt-based superalloy first stage nozzle10.1016/j.matdes.2010.02.021 ↗
7. Cobalt-base high-temperature alloys10.1126/science.1121738 ↗
8. High temperature oxidation of γ/γ’-strengthened Co-base superalloys10.1016/j.corsci.2011.02.033 ↗
9. Microstructure control of Co-base ODS alloys10.4028/www.scientific.net/AMR.239-242.864 ↗
10. Characterization of high temperature creep properties in recrystallized 12Cr-ODS ferritic steel claddings10.1080/18811248.2002.9715271 ↗
11. Grain boundary deformation at high temperature tensile tests in ODS ferritic steel10.2355/isijinternational.51.982 ↗
12. Microstructure characterization and tensile properties of 18Cr-4Aloxide dispersion strengthened ferritic steel10.1016/j.jallcom.2015.06.248 ↗
13. Bibby · Cobalt · 1963 · 20 · 111
14. Huang · Appl. Phys. Lett. · 1995 · 66 · 30810.1063/1.113527 ↗
15. Sort · Philos. Mag. · 2003 · 83 · 43910.1080/0141861021000047159 ↗
16. Strain-induced grain refinement of cobalt during surface mechanical attrition treatment10.1016/j.actamat.2004.10.021 ↗
17. γ→εmartensite transformation and twinning deformation in fcc cobalt during surface mechanical attrition treatment10.1016/j.scriptamat.2004.12.004 ↗
18. Twinning and strain-induced F.C.C.—H.C.P. transformation on the mechanical properties of Co-Ni-Cr-Mo alloys10.1016/0025-5416(76)90234-2 ↗
19. Y2O3 evolution and dispersion refinement in Co-base ODS alloys10.1016/j.actamat.2009.04.033 ↗
20. Effect of heat treatment on the hardness and microstructure in Co-3Al-1.5Y2O3-1.2Hf ODS alloy10.1016/j.msea.2014.02.009 ↗
21. PANDAT software with PanEngine, PanOptimizer and PanPrecipitation for multi-component phase diagram calculation and materials property simulation10.1016/j.calphad.2008.08.004 ↗
22. Microstructure characterization of Co-20Cr-(5, 10)Al oxide dispersion strengthened superalloys10.1016/j.matchar.2015.12.027 ↗
23. The structure and mechanical properties of high-strength bulk untrafine-grained cobalt prepared using high-energy ball milling in combination with spark plasm sintering10.3390/ma9050391 ↗
24. Effect of alloying elements on fcc/hcp martensitic transformation and shape memory properties in Co-Al alloys10.2320/matertrans.47.2381 ↗
25. Athermal ε-martensite in a Co-Cr-Mo alloy: grain size effects10.1016/S0167-577X(99)00022-1 ↗
26. Strain induced ε-martensite in a Co-Cr-Mo alloy: grain size effects10.1016/S0167-577X(99)00021-X ↗
27. Thermodynamic interpretation of the martensitic transformation in ultrafine-Fe(N) particles10.1143/JJAP.35.4468 ↗
28. Gibbs-Thomson effect in nanocrystalline Fe-Ge10.1103/PhysRevB.62.3218 ↗
29. Thermal history dependence of the crystal structure of Co fine particles10.1103/PhysRevB.71.024106 ↗
30. Study of the phase transformation of cobalt10.1007/BF02645161 ↗
31. Modeling the mean grain size of synthesized nanopowders produced by mechanical alloying10.1016/j.ceramint.2012.07.111 ↗
32. Rapid synthesis of nanopowders in high energy ball milling; Optimization of milling parameters10.1016/j.ceramint.2014.09.101 ↗
33. Nano-mesoscopic structure control in 9Cr–ODS ferritic steels10.1179/174892407X210357 ↗
34. Influence of grain size on the density of deformation twins in Cu-30%Zn alloy10.1016/j.msea.2010.02.076 ↗
35. Venables · Philos. Mag. · 1961 · 6 · 37910.1080/14786436108235892 ↗
36. Bibring · Inst. Met. · 1958 · 87 · 71
37. Scattergood · Philos. Mag. A · 1975 · 31 · 17910.1080/14786437508229295 ↗
38. Armstrong · Philos. Mag. · 1962 · 7 · 4510.1080/14786436208201857 ↗
39. Evaluation of a Ni-20Cr alloy processed by multi-axis forging10.4028/www.scientific.net/MSF.503-504.793 ↗
40. Gray · J. Phys. IV Fr. · 1997 · 7 · 423
41. Strain hardening regimes and microstructure evolution during large strain compression of high purity titanium10.1016/S1359-6462(02)00005-2 ↗
42. Grain boundary deformation at high temperature tensile tests in ODS ferritic steel10.2355/isijinternational.51.982 ↗
43. Grain boundary sliding at high temperature deformation in cold-rolled ODS ferritic steels10.1016/j.jnucmat.2014.05.040 ↗
44. Directional recrystallization of ODS alloys by means of zone annealing10.1016/j.jnucmat.2011.01.062 ↗