Effects of cooperative grain boundary sliding and migration on the particle cracking of fine-grained magnesium alloys
Source abstract
Abstract
Abstract This study theoretically investigates superplastic deformation and two typical coordination mechanisms of fine-grained magnesium (Mg) alloys. The interaction among grain boundary sliding, grain boundary migration and the fracture of particles during superplastic deformation is extensively discussed. The process of cooperative grain boundary sliding and migration is modelled with double wedge disclination dipoles. The whole-region stress field and the critical crack length are attained using the complex potential method for plane elasticity. The results show that the cracking of the particle itself is an effective coordination mechanism that can relax the intense stress concentration resulting from superplastic deformation based on grain boundary sliding; the farther the grain boundary slides and the higher the misorientation angle is, the more energetically the particle fractures; the higher the shear modulus ratio of the particle to Mg matrix and the smaller the particle radius, however, the larger is the resistance to crack nucleation and the weaker is the coordination effect based on the particle cracking; as a competitive coordination mechanism, cooperative migration consumes the local energy accumulated by the grain boundary sliding, toughening the particle-reinforced alloys for some relative orientations between the moving boundaries and the particle.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Achieving high strain rate superplasticity in Mg–Zn–Y–Zr alloy produced by friction stir processing10.1016/j.scriptamat.2011.04.041 ↗
2. Recent developments in high strain rate superplasticity10.2320/matertrans1989.40.716 ↗
3. Achieving high strain rate superplasticity in Mg–Y–Nd–Zr alloy processed by homogenization treatment and equal channel angular pressing10.1016/j.msea.2015.03.011 ↗
4. High-strain-rate superplasticity at low temperature in a ZK61 magnesium alloy produced by powder metallurgy10.1016/S1359-6462(99)00155-4 ↗
5. High strain rate superplasticity of rolled AZ91 magnesium alloy10.1016/S1001-0521(08)60028-5 ↗
6. High strain rate superplasticity in friction stir processed ultrafine grained Mg–Al–Zn alloys10.1016/j.msea.2012.11.026 ↗
7. Superplasticity of a nano-grained Mg–Gd–Y–Zr alloy processed by high-pressure torsion10.1016/j.msea.2015.10.094 ↗
8. Initiation and growth of microcracks near a grain boundary precipitation in coarse-grained zones of welded materials10.1016/j.ijsolstr.2016.10.008 ↗
9. Toughening effect of the nanoscale twinning induced by particle/matrix interfacial fracture on fine-grained Mg alloys10.1016/j.ijsolstr.2016.10.001 ↗
10. Ductile fracture mechanism in fine-grained magnesium alloy10.1080/09500839.2010.508444 ↗
11. Grain boundary sliding mechanism during high temperature deformation of AZ31 Magnesium alloy10.1016/j.msea.2016.05.076 ↗
12. Superplasticity and grain boundary sliding characteristics in two stage deformation of Mg–3Al–1Zn alloy sheet10.1016/S0921-5093(02)00097-7 ↗
13. Effects of accommodated grain boundary sliding on triple junction nanovoid nucleation in nanocrystalline materials10.1016/j.mechmat.2014.01.002 ↗
14. Dynamic recrystallization based on twinning in coarse-grained Mg10.4028/www.scientific.net/MSF.419-422.521 ↗
15. Continuous dynamic recrystallization in Magnesium alloy10.4028/www.scientific.net/MSF.419-422.509 ↗
16. Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK6010.1016/S1359-6454(01)00020-9 ↗
17. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
18. Achieving high strain rate superplasticity of an Al-Mg-Sc-Zr alloy by a new asymmetrical rolling technology10.1016/j.msea.2016.06.070 ↗
19. Low-temperature superplasticity of extruded Mg-Sn-Al-Zn alloy10.1016/j.scriptamat.2011.04.005 ↗
20. Superplasticity and load relaxation behavior of extruded Mg-8Sn-3Al-1Zn alloy at 250 °C10.1016/j.msea.2016.01.014 ↗
21. Fracture toughness in direct extruded Mg-Al-Zn alloys10.1557/jmr.2007.0334 ↗
22. Crack nucleation at disclinated triple junctions10.1103/PhysRevB.76.134105 ↗
23. Modelling the nucleation and growth of fragment boundary segments in terms of disclinations10.1016/j.jallcom.2003.11.169 ↗
24. Stability and relaxation mechanisms of a wedge disclination in an HCP bicrystalline nanowire10.1088/0965-0393/14/4/008 ↗
25. Misorientation dependence of the energy of [11¯00] symmetrical tilt boundaries in hcp metals: prediction by the disclination-structural unit model10.1080/14786430310001646817 ↗
26. Cooperative grain boundary sliding and migration process in nanocrystalline solids10.1103/PhysRevLett.105.055504 ↗
27. Effect of cooperative grain boundary sliding and migration on crack growth in nanocrystalline solids10.1016/j.actamat.2011.04.056 ↗
28. Effect of cooperative nanograin boundary sliding and migration on dislocation emission from a blunt nanocrack tip in nanocrystalline materials10.1080/14786435.2013.861091 ↗
29. Nanocracks at grain boundaries in nanocrystalline materials10.1080/09500830512331329123 ↗
30. The influence of aluminum of the microstructure and hardness of Mg-5Si-7Sn alloy10.1515/amm-2016-0077 ↗
31. Effect of Ag and Cu trace additions on the microstructural evolution and mechanical properties of Mg–5Sn alloy10.1016/j.jallcom.2013.02.186 ↗
32. Muskhelishvili · 1953
33. Analytical solution for a strained reinforcement layer bonded to lip-shaped crack under remote mode III uniform load and concentrated load10.1007/s10483-010-1348-7 ↗
34. Fracture mechanism of a coarse-grained magnesium alloy during fracture toughness testing10.1080/09500830802537718 ↗
35. Theoretical study on the {-1012} deformation twinning and cracking in coarse-grained magnesium alloys10.1016/j.ijplas.2016.02.001 ↗
36. Atomic relaxation, stability and electronic properties of Mg2Sn (100) surfaces from ab-initio calculations10.1016/j.jma.2016.02.002 ↗