journal article·2017-03

The orientation spreading in γ-fiber of electron beam melted Ta-2.5W alloy during cold rolling

S. Wang, L. Niu, C. Chen, Y.L. Jia, M.P. Wang, Z. Li, Z.H. Zhong, P. Lu, P. Li, Y.C. Wu

Publisher page

Abstract

Abstract The work presents a detailed investigation of the microstructure characteristics of the γ-fiber (normal direction// ) in electron beam melted Ta-2.5W alloy subjected to cold rolling. With increasing strain, the average space of microbands decreases towards a saturation value which is about 0.5 μm. The typical microstructure in γ fiber is microbands and shear bands in different appearance. The microbands are relatively straight and aligned close with slip planes when the strain is lower than 60%. The non-crystallographic irregular microbands and shear bands prevail in γ fiber when the strain is larger than 70%. When the strain reaches 90%, a group of parallel macroshear bands are formed. The orientation of γ fiber can spread up to 60°. Both {111} and {001} new orientations are developed in {111} orientation. Many new developed high angle boundaries of these new grains are coincident site lattice boundaries (Σ3 and Σ9). Meanwhile, these new grains and matrix always share a common or with matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Diffusion of liquid uranium into foils of tantalum metal and tantalum-10 wt% tungsten alloy up to 1350 °C10.1016/0022-3115(88)90332-7 ↗
2. Correlation between defect structures and hardness in tantalum irradiated by heavy ions10.1016/S0022-3115(00)00354-8 ↗
3. The effects of tungsten addition on the microtexture and mechanical behavior of tantalum plate10.1016/S0921-5093(97)00690-4 ↗
4. Microstructural development in asymmetric processing of tantalum plate10.1007/s11664-005-0159-5 ↗
5. Characterization of crystallographic texture and intra-grain morphology in cross-rolled tantalum10.1007/s11661-014-2686-2 ↗
6. The evolution of dislocation microstructure in electron beam melted Ta-2.5W alloy during cold rolling10.1016/j.ijrmhm.2016.09.001 ↗
7. Evolution of deformation microstructures of cold-rolled Ta-2.5W alloy with coarse grains at low to medium strains10.1016/j.ijrmhm.2015.07.023 ↗
8. Largely alleviating the orientation dependence by sequentially changing strain paths10.1016/j.matdes.2016.02.084 ↗
9. Orientation dependence of the dislocation microstructure in compressed body-centered cubic molybdenum10.1016/j.matchar.2014.02.001 ↗
10. The three-dimensional nature of microbands in a channel die compressed Goss-oriented Ni single crystal10.1016/j.scriptamat.2010.10.020 ↗
11. Retention of the Goss orientation between microbands during cold rolling of an Fe3%Si single crystal10.1016/j.actamat.2006.11.048 ↗
12. Spatial orientations and structural irregularities associated with the formation of microbands in a cold deformed Goss oriented Ni single crystal10.1016/j.actamat.2012.08.003 ↗
13. The evolution of microbands and their interaction with NbC precipitates during hot deformation of a Fe-30Ni-Nb model austenitic steel10.1016/j.actamat.2015.08.003 ↗
14. Microstructure evolution in an interstitial-free steel during cold rolling at low strain levels10.1098/rspa.2002.1051 ↗
15. Formation and control of sharp {100}<021> texture in electrical steel10.1016/S1006-706X(06)60045-9 ↗
16. {001}<210> texture development by two-stage cold rolling method in non-oriented electrical steel10.2355/isijinternational.37.1263 ↗
17. Evolution of texture and deformation microstructure in Ta-2.5W alloy during cold rolling10.1557/jmr.2015.262 ↗
18. Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe-Mn-Al-C steel10.1016/j.actamat.2012.07.018 ↗
19. Microbanding mechanism in an Fe–Mn–C high-Mn twinning-induced plasticity steel10.1016/j.scriptamat.2013.03.010 ↗
20. Effect of grain orientation on deformation structure in cold-rolled polycrystalline aluminium10.1016/S1359-6454(98)00229-8 ↗
21. Dislocation structures. Part I. Grain orientation dependence10.1080/14786430701652851 ↗
22. Deformation banding and recrystallization of α fibre components in heavily rolled IF steel10.1016/j.actamat.2004.05.017 ↗
23. Unusual crystallographic aspects of microband boundaries within {111}<110> oriented grains in a cold rolled interstitial free steel10.2355/isijinternational.54.1346 ↗
24. The crystallographic relationship of molybdenum textures after hot rolling and recrystallization10.1016/j.matdes.2016.06.103 ↗
25. γ-fibre recrystallization texture in IF-steel: an investigation on the recrystallization mechanisms10.1016/S0921-5093(97)00455-3 ↗
26. The nucleation of recrystallization textures and the development of textures in heavily compressed iron-carbon alloys10.1155/TSM.1.151 ↗
27. Textures of cold rolled and annealed tantalum10.4028/www.scientific.net/MSF.157-162.841 ↗
28. Doherty · Curr. Issues Recryst. a Rev. Mater. Sci. Eng. A · 1997 · 238 · 21910.1016/S0921-5093(97)00424-3 ↗