Secondary twin variant selection in Mg alloy after a strain-path change
Source abstract
Abstract
Abstract Secondary extension twins form in primary extension twins in a deformed Mg alloy after a strain-path change. Statistical analysis reveals that 12.7% of the secondary extension twins correspond to low Schmid factor (SF) twin variants. It is found that these low SF secondary extension twins require the largest or the second largest easy accommodation (i.e., basal slip, prismatic slip or extension twinning) in their neighboring crystals, which could be their host grains, neighboring grains and primary extension twins. Both SF and strain accommodation should be considered to better predict secondary twin variant selection after a strain-path change.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Sequential double extension twinning in a magnesium alloy: combined statistical and micromechanical analyses10.1016/j.actamat.2015.06.029 ↗
2. {10-12}-{10-12} Double twinning in magnesium10.1080/09500839.2011.593576 ↗
3. Texture evolution of rolled Mg–3Al–1Zn alloy undergoing a {10-12} twinning dominant strain path change10.1016/j.jallcom.2015.05.194 ↗
4. Multiple twinning modes in rolled Mg–3Al–1Zn alloy and their selection mechanism10.1016/j.msea.2011.11.003 ↗
5. Improving the anisotropy of rolled Mg–3Al–1Zn alloy by pre-strain and annealing10.1016/j.msea.2014.08.005 ↗
6. Deformation behavior and mechanical properties of composite twin structures under different loading paths10.1016/j.msea.2015.05.100 ↗
7. Reducing the tension–compression yield asymmetry in a hot-rolled Mg–3Al–1Zn alloy via multidirectional pre-compression10.1016/j.msea.2012.11.127 ↗
8. In-plane anisotropic deformation behavior of rolled Mg–3Al–1Zn alloy by initial {10–12} twins10.1016/j.msea.2013.01.071 ↗
9. Use of Schmid factors to select extension twin variants in extruded magnesium alloy tubes10.1016/j.scriptamat.2006.07.059 ↗
10. Challenges in the prediction of twin transmission at grain boundaries in a magnesium alloy10.1016/j.scriptamat.2016.05.044 ↗
11. Yield point elongation due to twinning in a magnesium alloy10.1016/j.actamat.2011.11.022 ↗
12. Geometrical compatibility factor analysis of paired extension twins in extruded Mg–3Al–1Zn alloys10.1016/j.matdes.2015.07.130 ↗
13. Characteristics of long {10-12} twin bands in sheet rolling of a magnesium alloy10.1016/j.scriptamat.2013.11.008 ↗
14. The different effects of twin boundary and grain boundary on reducing tension-compression yield asymmetry of Mg alloys
15. Identification and analysis of twinning variants during compression of a Mg–Al–Zn alloy10.1016/j.scriptamat.2007.09.047 ↗
16. On the selection of extension twins with low Schmid factors in a deformed Mg alloy10.1016/j.actamat.2014.10.004 ↗
17. The role of strain accommodation during the variant selection of primary twins in magnesium10.1016/j.actamat.2010.12.005 ↗
18. Variant selection of primary extension twins in AZ31 magnesium deformed at 400 °C10.1016/j.msea.2015.10.020 ↗
19. Variant selection of primary, secondary and tertiary twins in a deformed Mg alloy10.1016/j.actamat.2012.01.014 ↗
20. Plastic relaxation of the internal stress induced by twinning10.1016/j.actamat.2013.09.024 ↗
21. Bachmann · 2010 · vol. 160 · 63
22. Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other hcp metals10.1016/j.scriptamat.2010.05.047 ↗
23. Hardening evolution of AZ31B Mg sheet10.1016/j.ijplas.2006.03.005 ↗
24. Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature10.1007/s11661-005-0032-4 ↗