journal article·2017-02

Synthesis of onion-like carbon-reinforced AlCuFe quasicrystals by high-energy ball milling

C. Patiño-Carachure, J.E. Flores-Chan, A. Flores Gil, G. Rosas

Publisher page

Abstract

Abstract High-energy ball milling of a hexagonal carbon and AlCuFe pure quasicrystal (QC) powder mixture was performed to prepare a nanocomposite material. The structure and morphology of as-milled powders were investigated using X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). XRD results revealed that, with increasing milling time, the peaks of the quasicrystalline phase become broader, whereas the peaks of the hexagonal carbon phase gradually disappeared, indicating the nanostructured nature of the sample. The Raman spectra observations revealed the presence of nanocrystalline carbon particles used as reinforcements in the composite. TEM results confirm that the high-energy ball milling method led to the formation of a nano-quasicrystalline material with highly deformed onion-like carbon (OLC) particles in a relatively short period of milling time. In the SEM analysis, it was found that the powder particles are refined during the milling process. However, it was observed by TEM that the particle size of the QC is clearly larger than the OLC particles, indicating the ability to obtain good dispersion and homogeneity of the reinforcement. The OLC particles have diameters ranging from 4 to 12 nm, and the number of graphite layers varies from 8 to 22. High-resolution TEM images show that the as-prepared OLC shows an intershell spacing around 0.33 nm, which corresponds to the (002) crystallographic planes of hexagonal graphite. The obtained OLC can be used as reinforcement in the QC matrix to get a product with high hardness and wear resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quasicrystal Structures and Properties · Mineralogy and Gemology Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Onion-like graphitic particles10.1016/0008-6223(95)00027-B ↗
2. Prospects and research progress in nano onion-like fullerenes10.1016/S1872-5805(09)60001-9 ↗
3. Study on solid lubricant properties of carbon onions produced by heat treatment of diamond clusters or particles10.1016/j.triboint.2004.07.006 ↗
4. Anti-wear and Friction Reducing Mechanisms of carbon nano-onions as lubricant additives10.1007/s11249-008-9316-3 ↗
5. Carbon nanotubes from synthesis to in vivo biomedical applications10.1016/j.ijpharm.2016.01.064 ↗
6. Oxidative dehydrogenation of ethylbenzene to styrene over ultra-dispersed diamond and onion-like carbon10.1016/j.carbon.2007.07.005 ↗
7. Review: carbon onions for electrochemical energy storage10.1039/C5TA08295A ↗
8. Removing PAHs from urban runoff water by combining ozonation and carbon nano-onions10.1016/j.chemosphere.2015.08.002 ↗
9. Curling and closure of graphitic networks under electron-beam irradiation10.1038/359707a0 ↗
10. Transformation of diamond nanoparticles into onion-like carbon by electron irradiation studied directly inside an ultrahigh-vacuum transmission electron microscope10.1063/1.1935047 ↗
11. Morphology analysis of onion-like fullerenes prepared by CCVD
12. Properties of carbon onions produced by an arc discharge in water10.1063/1.1498884 ↗
13. Structure of carbon onions and nanotubes formed by arc in liquids10.1063/1.1629274 ↗
14. Nano-scale carbon onions produced by laser photolysis of toluene for detection of optical, humidity, acetone, methanol and ethanol stimuli10.1016/j.snb.2015.03.033 ↗
15. Large-scale synthesis of onion-like carbon nanoparticles by carbonization of phenolic resin10.1016/j.actamat.2007.07.013 ↗
16. Hollow carbon onions with larger lattice spacing obtained by chlorination of the ball-milled SiC10.1016/j.matlet.2012.08.025 ↗
17. Transformation of carbon nanotubes to nanoparticles by ball milling process10.1016/S0008-6223(98)00218-8 ↗
18. Highly curved carbon nanostructures produced by ball-milling10.1016/S0009-2614(99)00131-1 ↗
19. Generation of curved or closed-shell carbon nanostructures by ball-milling of graphite10.1016/S0022-0248(00)00486-3 ↗
20. Quasicrystals. I. Definition and structure10.1103/PhysRevB.34.596 ↗
21. Quasicrystals as cluster aggregates10.1038/nmat1244 ↗
22. Discussion on clusters, phasons, and quasicrystal stabilisation10.1080/14786430500419395 ↗
23. Synthesis, atomic structures and properties of carbon and boron nitride fullerene materials10.1016/S0921-5107(99)00563-2 ↗
24. XRD and HREM studies from the decomposition of icosahedral AlCuFe single-phase by high-energy ball milling10.1016/j.jallcom.2011.08.026 ↗
25. Hydrogen embrittlement assisted by ball-milling to obtain AlCuFe nanoparticles10.1016/j.jnoncrysol.2009.06.019 ↗
26. Flame synthesis of carbon nano onions using liquefied petroleum gas without catalyst10.1016/j.msec.2012.10.029 ↗
27. Structural peculiarities of carbon onions, formed by four different methods: onions and diamonds, alternative products of graphit high-pressure treatment10.1016/j.scriptamat.2008.11.008 ↗
28. Influence of the structure of carbon onions on their electrochemical performance in supercapacitor electrodes10.1016/j.carbon.2011.12.022 ↗