journal article·2013-08

Wetting characteristics of Cu–xZn layers for Sn–3.0Ag–0.5Cu solders

Ji Hyun Lee, Young Min Kim, Ji Hwan Hwang, Young-Ho Kim

Publisher page

Abstract

Abstract Cu–xZn solder wetting layers for Pb-free solders were successfully electroplated in an eco-friendly non-cyanide bath. Wetting experiment for the Sn–3.0Ag–0.5Cu (SAC305) solder were performed on the four wetting layers; Cu, Cu–20 wt.% Zn electroplated using cyanide solution, Cu–20 wt.% Zn and Cu–30 wt.% Zn layer electroplated using a non-cyanide solution. The effects of soldering temperature and flux type on wetting characteristics with SAC305 solder were also investigated. First, the wetting force and wetting time were measured from the wetting balance test to evaluate the wetting characteristics of SAC solder. The rosin mildly activated (RMA) and water soluble (WS) fluxes were used. The wettability of SAC solder on both the Cu and Cu–xZn layer was enhanced by increasing the soldering temperature and chemical cleaning of the wetting layers. When RMA type flux was applied, the Cu layer exhibited better wetting characteristics than the Cu–xZn layer. When WS flux was applied, the wettability of both the Cu and Cu–xZn layer was enhanced and the Cu and Cu–xZn layer showed similar wetting characteristics. Next, the spreading area and wetting angle were measured after SAC305 solder balls were placed on four wetting layers and reflowed at 250 °C for 10 s by using the WS flux. As the reflow temperature increased or after chemical etching, the spreading area of all the samples was increased and the wetting angle decreased. Applying the WS flux which includes higher activity has good wettability in the Cu–Zn layer. If the proper flux is used, the wettability of the Cu–xZn layer was as good as the Cu layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. H.R. Roh, C.Y. Oh, Y.-H. Kim, W.K. Choi, Y.C. Sohn, C.Y. Moon, in: Proceedings of International Conference on Electronics packaging, Tokyo, Japan, 2007, pp. 1–5.
2. Oh · J. Mater. Res. · 2009 · 24 · 29710.1557/JMR.2009.0047 ↗
3. H.R. Roh, Y.-H. Kim, in: Proceedings of International Conference on Electronic Materials and Packaging, Daejeon, Korea, 2007, pp. 1–4.
4. Cho · J. Alloys Comp. · 2009 · 474 · 51010.1016/j.jallcom.2008.06.141 ↗
5. Yu · J. Electron. Mater. · 2010 · 39 · 23010.1007/s11664-009-0992-z ↗
6. Y.M. Kim, C.Y. Oh, H.R. Roh, Y.-H. Kim, in: Proceedings of Electronic Components and Technology Conference, San Diego, California, IEEE, Piscataway, New Jersey, 2009, pp. 1008–1013.10.1109/ECTC.2009.5074135 ↗
7. Y.M. Kim, Y.-H. Kim, in: Proceedings of International Conference on Electronic Materials and Packaging, Taiwan, Taipei, 2008, pp. 236–238.10.1109/EMAP.2008.4784272 ↗
8. J. Lu, S.C. Busch, D.F. Baldwin, in: Proceedings of Electronic Components and Technology Conference, Orlando, Florida, IEEE, Piscataway, New Jersey, 2001, pp. 372–377.
9. Beattie · J. Electrochem. Soc. · 2003 · 150 · C80210.1149/1.1615998 ↗
10. Yoon · J. Alloys Comp. · 2009 · 486 · 14210.1016/j.jallcom.2009.06.159 ↗
11. Noh · J. Alloys Comp. · 2010 · 499 · 15410.1016/j.jallcom.2010.03.179 ↗
12. H.J. Ju, Y.H. Lee, S.S. Nho, E.H. Choi, S.K. Rha, Y.S. Lee, in: Proceedings of International Symposium on the Physical and Failure Analysis of Integrated Circuits, Incheon, Korea, IEEE, Piscataway, New Jersey, 2011, pp. 1–5.
13. Walker · 1991
14. Chung · J. Adhesion Sci. Technol. · 1994 · 8 · 4110.1163/156856194X00041 ↗
15. L. Zhang, G. Sun, L. Li, J.K. Shang, in: Proceedings of Electronic Packaging Technology Conference, 2007.
16. Kubaschewski · 1962
17. Qiu · J. Electrochem. Soc. · 2011 · 158 · C17210.1149/1.3577600 ↗
18. Graedel · 2000
19. Liu · Scripta Mater. · 2006 · 54 · 21910.1016/j.scriptamat.2005.09.033 ↗
20. Hong · IEEE T Adv. Pack. · 2004 · 27 · 9010.1109/TADVP.2003.821079 ↗
21. Xu · J. Electron. Mater. · 2008 · 37 · 12510.1007/s11664-007-0304-4 ↗
22. Yu · J. Mater. Sci. · 2000 · 35 · 421710.1023/A:1004867329163 ↗
23. Rizvi · J. Electron. Mater. · 2005 · 34 · 111510.1007/s11664-005-0239-6 ↗
24. Eustathopoulos · Mater. Sci. Eng.: A · 1991 · 135 · 8310.1016/0921-5093(91)90541-T ↗
25. Matienzo · J. Mater. Sci. · 1991 · 26 · 78710.1007/BF00588316 ↗
26. Klein Wassink · 1984
27. Soldering performance of fluxes: a study
28. http://www.quick-korea.com/goods_detail.php?goodsIdx=10338.
29. Vaynman · J. Electron. Mater. · 2000 · 29 · 116010.1007/s11664-000-0007-6 ↗
30. Cassie · Trans. Faraday Soc. · 1944 · 40 · 54610.1039/tf9444000546 ↗