Formability of strong metastable Fe–15Cr–3Mn–3Ni–0.2C–0.1N austenitic TRIP/(TWIP) steel – A comparison of different base materials
Source abstract
Abstract
Abstract The formability of a novel metastable Fe–15Cr–3Mn–3Ni–0.2C–0.1N austenitic TRIP/(TWIP) steel was investigated by cold rolling and rolling at elevated temperatures for different base materials. One was an as-cast material while the other was a hot-rolled one, with resulting differences in structure. The base material was characterized by the grain size and microstructure, as well as by the martensitic content. After final rolling, the characteristic material values such as average austenite grain size were investigated, the type of fracture was detected, while the Vickers hardness and the martensitic phase content were also measured. In the case of cold rolling at RT, both base materials achieved similar maximum deformation values until fracture. The martensite fraction in the material was determined to be at a minimum of 80 ± 1%. After rolling at 200 °C, a significant increase in formability was found for the steels examined. At elevated temperatures, maximal deformations reached were nearly identical for both base materials, signifying a great improvement for the as-cast condition. The measured martensite fraction in the material rolled at elevated temperatures had a maximum of about 6 ± 1% and, therefore, was lower than in the cold-rolled specimen. These changes could be explained by plasticity mechanisms in the austenite, including planar dislocation glide, twinning mechanisms, and α'-martensite formation. With these investigations, a technology has been found for the rolling of a new class of steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Microstructure and Compression Strength of Novel TRIP-Steel/Mg-PSZ Composites10.1002/adem.200900210 ↗
2. Nichtrostende Stähle mit TRIP/TWIP/SBIP-Effekt10.1002/mawe.200800361 ↗
3. Hochfester, kaltumformbarer, austenitischer Stahlguss mit TRIP/TWIP-Eigenschaften
4. High-strength cold-formable austenitic cast steel with TRIP/TWIP properties
5. Effect of manganese on microstructure and mechanical properties of cast high alloyed CrMnNi–N steels: effect of Mn in cast high alloyed CrMnNi–N Steels10.1002/adem.201200318 ↗
6. Influence of carbon on the microstructure and mechanical properties of cast austenitic Fe–19Cr–4Ni–3Mn–0.15N Steels
7. Mechanical properties of high alloyed cast and rolled CrMnNi TRIP steels with varying Ni contents
8. Reinforcing mechanism of Mg–PSZ particles in highly-alloyed TRIP steel10.1002/srin.201100099 ↗
9. The influence of preceding cryoforming and testing temperature on the mechanical properties of austenitic stainless steels10.1002/srin.200001233 ↗
10. Temperature depending influence of the martensite formation on the mechanical properties of high-alloyed Cr–Mn–Ni As-Cast Steels10.1002/srin.201000228 ↗
11. Effects of deformation induced phase transformation and twinning on the mechanical properties of austenitic Fe–Mn–Al alloys10.2355/isijinternational.29.868 ↗
12. Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe–Mn–C steel10.1016/j.msea.2006.12.170 ↗
13. Correlation between stacking fault energy and deformation microstructure in high-interstitial-alloyed austenitic steels10.1016/j.actamat.2010.01.056 ↗
14. Effect of carbon fraction on stacking fault energy of austenitic stainless steels10.1007/s11661-012-1423-y ↗
15. Characterization and prediction of flow behavior in high-manganese twinning induced plasticity steels: part I. mechanism maps and work-hardening behavior10.1007/s11661-011-0993-4 ↗
16. Effect of carbon and nitrogen on the stacking fault energy of high-alloyed iron-based austenite10.3139/146.031012 ↗
17. On the electron structure of Mn–, Ni– and Cr–Ni–Mn austenite with different stacking fault energy10.1016/j.scriptamat.2005.07.002 ↗
18. Microstructural changes taking place during the thermo-mechanical processing and cold working of steel 18Cr18Mn0.5N10.1016/j.jmatprotec.2004.09.072 ↗
19. Effect of nitrogen on the electron structure and stacking fault energy in austenitic steels10.1016/j.scriptamat.2006.05.025 ↗
20. Influence of temperature on phase transformation and deformation mechanisms of cast CrMnNi–TRIP/TWIP steel10.4028/www.scientific.net/SSP.172-174.172 ↗
21. Nitrogen in chromium–manganese stainless steels: a review on the evaluation of stacking fault energy by computational thermodynamics10.1088/1468-6996/14/3/033001 ↗
22. Cold rolling behaviour of an austenitic Fe–30Mn–3Al–3Si TWIP-steel: the importance of deformation twinning10.1016/j.actamat.2003.12.040 ↗
23. Study of the combined TWIP/TRIP effect in a high Mn steel during cold rolling10.1002/srin.201100306 ↗
24. Effect of the cold rolling reduction on the microstructural characteristics and mechanical behavior of a 0.06%C–17%Mn TRIP/TWIP Steel
25. Oettel · 2005
26. Thermodynamic-mechanical modeling of strain-induced α′-martensite formation in austenitic Cr–Mn–Ni As-cast steel: thermodynamic-mechanical modeling of strain-induced α′-martensite formation10.1002/adem.201200340 ↗
27. Hochfester und Kaltumformbarer austenitischer Stahlguss mit TRIP/TWIP Eigenschaften
28. Lenard · 1999
29. Stenger · 1965
30. Werkstoffverhalten einer TRIP/TWIP-fähigen CrMnNi-Stahlgusslegierung bis zu hohen Dehnraten10.3139/120.110165 ↗
31. Wolf · 2012
32. Deformation of austenitic CrMnNi TRIP/TWIP steels: nature and role of the ε-martensite10.1016/j.matpr.2015.07.366 ↗
33. Stacking faults in high-alloyed metastable austenitic cast steel observed by electron channelling contrast imaging10.1016/j.scriptamat.2010.11.028 ↗
34. The strain induced martensite transformation in austenitic stainless steels: part 1 – Influence of temperature and strain history10.1179/174328408X293603 ↗
35. Influence of machining-induced martensite on hydrogen-assisted fracture of AISI type 304 austenitic stainless steel10.1016/j.ijhydene.2011.05.133 ↗
36. Klocke · 2005
37. Effect of strain-induced martensite on the formation of nanocrystalline 316L stainless steel after cold rolling and annealing10.1016/j.msea.2009.04.038 ↗
38. Weber · 1974
39. Lee · 2004
40. Ginzburg · 2000
41. Normal Hall–Petch behavior of mild steel with submicron grains10.1016/S0167-577X(02)01377-0 ↗
42. Grain growth and Hall–Petch relation in dual-sized ferrite/cementite steel with nano-sized cementite particles in a heterogeneous and dense distribution10.1016/j.scriptamat.2005.11.032 ↗
43. Development of ultra fine grain structure by martensitic reversion in stainless steel10.1023/A:1015757710546 ↗
44. Effects of martensite formation and austenite reversion on grain refining of AISI 304 stainless steel10.1023/A:1020631912685 ↗