Microstructure instability of additively manufactured alloy 718 fabricated by laser powder bed fusion during thermal exposure at 600–1000 ℃
Source abstract
Abstract
Microstructure and precipitation behavior of alloy 718 produced by laser powder bed fusion (L-PBF) and its recrystallized counterpart were evaluated after thermal exposure at a temperature range of 600–1000 ℃ for up to 1000 h. The as-built 718 featured a microstructure of columnar grains, and dislocation cell structures (DCSs) with chemical segregations (rich in Nb, Ti, Mo and depleted in Cr, Fe) and precipitates (Laves phase and carbonitride). The DCSs remained thermally stable for up to 1000 h at 600 ℃ or 100 h at 700 ℃, but only 10 h at 800 ℃. With the temperature increasing to 900 ℃ and 1000 ℃ for 1 h duration, the DCSs tended to partially disassemble, and the chemical segregations were removed. The chemical segregations at cell boundaries of the as-built 718 promoted the formation of γ′, γ″ and δ phases during aging, leading to a spatially heterogeneous distribution of γ′ and γ″ phases between the cell boundaries and interiors during short exposure time or at lower temperatures. Meanwhile, the coarsening of γ′ and γ″ phases and the phase transformation of γ″ to δ at 700–800 ℃ were facilitated in the as-built 718 compared to the recrystallized ones. A unique precipitation distribution was observed at 700 ℃ that γ′ and γ″ phases precipitated both at the cell boundaries and within cell interiors, while only γ′ formed in the vicinity of cell boundaries. Time-temperature-transformation curves for additively manufactured and recrystallized 718 were constructed based on the microstructure analyses. This study indicates that conventional heat treatment procedures may be suboptimized for additively manufactured 718 in high temperature applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. S. Anderson, Final technical report on laser direct manufacturing (LDM) for nuclear power components, DOE-NE0000542, USDOE Office of Nuclear Energy, (2015).10.2172/1233481 ↗
2. Thermal stability and microstructural evolution of additively manufactured 316L stainless steel by laser powder bed fusion at 500–800℃
3. Creep behavior of 316 L stainless steel manufactured by laser powder bed fusion10.1016/j.jnucmat.2021.152847 ↗
4. Effects of heat treatment on corrosion fatigue and stress corrosion crack growth of additive-manufactured Alloy 800H in high-temperature water10.1016/j.corsci.2021.109739 ↗
5. Radiation damage and irradiation-assisted stress corrosion cracking of additively manufactured 316L stainless steels10.1016/j.jnucmat.2018.10.044 ↗
6. A comparison study of void swelling in additively manufactured and cold-worked 316L stainless steels under ion irradiation10.1016/j.jnucmat.2021.152946 ↗
7. On the stress corrosion crack growth behaviour in high temperature water of 316L stainless steel made by laser powder bed fusion additive manufacturing10.1016/j.corsci.2017.09.017 ↗
8. In-situ radiation response of additively manufactured modified Inconel 718 alloys
9. An overview of the Westinghouse small modular reactor
10. Morphology of γ' and γ″ precipitates and thermal stability of inconel 718 type alloys10.1007/BF02649604 ↗
11. Precipitation of the δ-Ni3Nb phase in two nickel base superalloys10.1007/BF02649259 ↗
12. Structural characterization of the aged Inconel 71810.1016/S0925-8388(00)00789-1 ↗
13. Enabling large superalloy parts using compact coprecipitation of γ′ and γ′10.1007/s11661-017-4356-7 ↗
14. Role of chemistry in 718-type alloys—Allvac 718Plus alloy development10.7449/2004/Superalloys_2004_91_99 ↗
15. Application of alloy 718 in GE aircraft engines: past, present and next five years
16. The roles of thermal mechanical treatment and δ phase in the stress corrosion cracking of alloy 718 in primary water10.1016/j.corsci.2019.108168 ↗
17. Carbide precipitation in nickel base superalloys 718 and 625 and their effect on mechanical properties
18. The failure mechanism of 50% laser additive manufactured Inconel 718 and the deformation behavior of Laves phases during a tensile process10.1007/s00170-016-9901-9 ↗
19. Metallurgical stability of Inconel alloy 718
20. The effect of varying AI, Ti, and Nb content on the phase stability of INCONEL 71810.1007/BF02645133 ↗
21. The effect of heat treatment on microfissuring in alloy 718
22. Microstructure modelling of laser metal powder directed energy deposition of alloy 718
23. The microstructure evolution and tensile properties of Inconel 718 fabricated by high-deposition-rate laser directed energy deposition
24. Investigation on the potential effects of laser stitching and subsequent heat treatment on the microstructure and mechanical properties of Nickel Alloy 718 produced via Laser Powder Bed Fusion (L-PBF)
25. Microstructure, fatigue, and impact toughness properties of additively manufactured nickel alloy 718
26. Effect of post-treatments under hot isostatic pressure on microstructural characteristics of EBM-built Alloy 718
27. Feasibility of in situ controlled heat treatment (ISHT) of Inconel 718 during electron beam melting additive manufacturing
28. Toward a better understanding of phase transformations in additive manufacturing of Alloy 71810.1016/j.mtla.2020.100862 ↗
29. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
30. Knowledge of process-structure-property relationships to engineer better heat treatments for laser powder bed fusion additive manufactured Inconel 718
31. Effect of heat treatment on microstructure evolution of Inconel 718 alloy fabricated by selective laser melting10.1016/j.jallcom.2018.06.112 ↗
32. Process parameter optimization for selective laser melting of Inconel 718 superalloy and the effects of subsequent heat treatment on the microstructural evolution and mechanical properties10.1016/j.jmapro.2021.02.004 ↗
33. Heat treatment of Inconel 718 produced by selective laser melting: Microstructure and mechanical properties10.1016/j.msea.2019.02.046 ↗
34. A review of mechanical properties of additively manufactured Inconel 718
35. Precipitation kinetics of gamma double prime phase during direct aging treatment of inconel 718 superalloy additively manufactured by selective laser melting10.1016/j.jmrt.2023.10.267 ↗
36. The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing10.1016/j.actamat.2018.10.032 ↗
37. Effect of heat treatment variations on the mechanical properties of Inconel 718 selective laser melted specimens
38. Precipitation behavior of δ phase and its effect on stress rupture properties of selective laser-melted Inconel 718 superalloy10.1016/j.compositesb.2021.109202 ↗
39. The precipitation behavior effect of δ and γ" phases on mechanical properties of laser powder bed fusion Inconel 718 alloy10.1016/j.matchar.2022.112456 ↗
40. Heat treatment for selective laser melting of Inconel 718 alloy with simultaneously enhanced tensile strength and fatigue properties10.1016/j.jallcom.2022.165171 ↗
41. Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments10.1016/j.msea.2017.12.043 ↗
42. Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy10.1016/j.msea.2015.06.021 ↗
43. Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting10.1016/j.msea.2015.05.035 ↗
44. Using post-processing heat treatments to elucidate precipitate strengthening of additively manufactured superalloy 718
45. ASTM, Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service, ASTM B670-07 (2010) 7-10.
46. ASTM, Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service, ASTM B637-12 (2018) 1-7.
47. The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 71810.1016/j.msea.2017.03.098 ↗
48. Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment10.1016/j.msea.2017.02.062 ↗
49. Evaluation of precipitation phase and mechanical properties according to aging heat treatment temperature of Inconel 71810.1016/j.jmrt.2023.10.196 ↗
50. The effect of subsequent heat treatment on the evolution behavior of second phase particles and mechanical properties of the Inconel 718 superalloy manufactured by selective laser melting10.1016/j.msea.2020.139931 ↗
51. Stability of the microstructure and elevated-temperature mechanical properties of additively manufactured Inconel 718 superalloy subjected to long-term in-service thermal cycling10.1016/j.msea.2022.142790 ↗
52. Microstructure, mechanical property and heat treatment schedule of the Inconel 718 manufactured by low and high power laser powder bed fusion10.1016/j.msea.2022.144517 ↗
53. Dissolution kinetics of Laves phase during homogenization heat treatment of additively manufactured Inconel 718 superalloy10.1016/j.jmrt.2023.04.013 ↗
54. Improved properties of additively prepared Inconel 718 alloy post-processed with a new heat treatment10.1016/j.msea.2024.146930 ↗
55. Effects of post-heat treatment on anisotropic mechanical properties of laser additively manufactured IN71810.1016/j.msea.2023.145144 ↗
56. Unveiling the Effect of Annealing Temperature on the Phase Transformations of Inconel 718 Super alloy Manufactured by Additive Manufacturing
57. Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
58. Identifying strain localization and dislocation processes in fatigued Inconel 718 manufactured from selective laser melting10.1016/j.msea.2018.03.127 ↗
59. Evolution of dislocation cellular pattern in Inconel 718 alloy fabricated by laser powder-bed fusion
60. ASTM, Standard test methods for determining average grain size using semiautomatic and automatic image analysis, ASTM E1382-97 (1997).
61. Quantitative analysis of dislocation distributions10.1016/0026-0800(70)90010-8 ↗
62. Williams · 1996
63. Paulonis · 1969
64. CaRIne crystallography: the crystallographic software for research and teaching
65. Some aspects of the precipitation of metastable intermetallic phases in INCONEL 71810.1007/BF02647549 ↗
66. Effect of micro-segregation of alloying elements on the precipitation behaviour in laser surface engineered Alloy 71810.1016/j.actamat.2021.116844 ↗
67. The formation and control of Laves phase in superalloy 718 welds10.1023/A:1018541915113 ↗
68. A comparison study of high purity nickel fabricated by laser powder bed fusion and subjected to dynamic plastic deformation
69. Étude du comportement structural de l′alliage NC 19 Fe Nb (Inconel 718)
70. Delta phase precipitation in Inconel 71810.1016/j.matchar.2004.07.004 ↗
71. New Jersey, USA
72. Rationalization of microstructure heterogeneity in INCONEL 718 builds made by the direct laser additive manufacturing process10.1007/s11661-014-2370-6 ↗
73. Microstructural characterization of laser metal powder deposited Alloy 71810.1016/j.matchar.2018.06.020 ↗
74. Some aspects of the heterogeneous precipitation of the metastable gamma-double prime phase in Alloy 62510.7449/1994/Superalloys_1994_405_418 ↗
75. Effect of cold rolling on the precipitation behavior of δ phase in Inconel 71810.1007/s11661-999-0193-7 ↗
76. Decomposition of the Laves phase in the fusion zone of the Inconel 718/ATI 718Plus® welded joint during isothermal holding at a temperature of 649 °C10.1016/j.matchar.2022.112560 ↗
77. A new refractory Ni7Nb2 phase identified in Laves eutectic regions by TEM study10.1016/j.actamat.2021.116985 ↗
78. Unexpected formation of delta (δ) phase in as-cast niobium-bearing superalloy at solution annealing temperatures10.1016/j.matlet.2019.127008 ↗
79. Hybrid additive manufacturing of Inconel 718 for future space applications10.1016/j.matchar.2020.110842 ↗