journal article·2024-11

Effect of rare earth element Y addition on the corrosion resistance of Cu-12.5Ni-5Sn alloy after aging

Xiaoxiong Liu, Zhen Li, Guodong Yang, Qian Wang, Songlin Lu, Guirong Yang, Jingbo Wang

Publisher page

Abstract

Cu-12.5Ni-5Sn-xY alloy with different rare earth Y contents was prepared by spark plasma sintering (SPS). The samples underwent aging at approximately 400°C for 4 hours in an energy-saving box furnace. The effect of trace Y addition on the microstructure and corrosion behavior of aging treated Cu-12.5Ni-5Sn-xY alloy were investigated by electrochemical test, and the corrosion mechanism of the alloy was discussed. The results indicated that the addition of rare earth Y improved the uniformity of microstructure and grain size of the alloy, and improved the corrosion resistance of the alloy. When the Y content changed between 0 wt% and 1.0 wt%, the corrosion resistance of the Cu-12.5Ni-5Sn-xY alloy gradually improved. The Cu-12.5Ni-5Sn-1.0Y alloy had a lower self-corrosion current density (1.490×10 −5A/cm 2) and a lower corrosion rate (0.178 mm/a). Compared to the Cu-12.5Ni-5Sn alloy without Y addition, the maximum corrosion depth was reduced by about 44.6 % and the corrosion resistance was improved. Rare earth Y promoted the uniform distribution of Ni elements, inhibited the conversion of Cu 2O to Cu 2(OH) 3Cl, enhanced the layer density and stability. The internal corrosion layer mainly consisted of NiO, the intermediate layer mainly consisted of SnO, and the surface layer mainly comprised of CuO, Cu 2O, and Cu 2(OH) 3Cl. Additionally, Y 2O 3 formed on the alloy`s surface, effectively prevented corrosive ion attack and enhanced the corrosion resistance of Cu-12.5Ni-5Sn alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. The tribo-corrosion behavior of Cu-9wt%Ni-6wt%Sn alloy10.1016/j.triboint.2015.06.031 ↗
2. A review of Cu-Ni-Sn alloys: processing, microstructure, properties, and developing trends10.3390/ma16010444 ↗
3. Focused review on Cu-Ni-Sn spinodal alloys: from casting to additive manufacturing10.1007/s12540-022-01305-6 ↗
4. The influence of microalloying and preparation process on phase transformation, mechanical properties, and friction/corrosion behavior of Cu–Ni–Sn alloys: a review10.1016/j.jmrt.2023.12.073 ↗
5. Research progress on Cu-15Ni-8Sn alloys: the effect of microalloying and heat treatment on microstructure and properties10.3390/ma16175913 ↗
6. A study of mechanical properties and conductivity capability of Cu-9Ni-3Sn alloy
7. Microstructure evolution and mechanical property of Cu-15Ni-8Sn-0.2Nb alloy during aging treatment10.1016/j.jmst.2021.01.034 ↗
8. Optimization of strength and ductility in an as-extruded Cu–15Ni–8Sn alloy by the additions of Si and Ti10.1016/j.jallcom.2020.153759 ↗
9. Improving the mechanical properties of Cu-15Ni-8Sn alloys by addition of titanium10.3390/ma10091038 ↗
10. Failure analysis of cupronickel evaporator tubes of a chilling plant10.1016/j.engfailanal.2009.10.014 ↗
11. Early failure of cupro-nickel condenser tubes in thermal desalination plant10.1016/S0011-9164(98)00190-8 ↗
12. Surface monitoring for pitting evolution into uniform corrosion on Cu-Ni-Zn ternary alloy in alkaline chloride solution: ex-situ LCM and in-situ SECM10.1016/j.apsusc.2018.01.116 ↗
13. Electrochemical behaviour of synthetic 90/10 Cu-Ni alloy containing alloying additions in marine environment10.1179/1743278212Y.0000000056 ↗
14. Effect of iron on the composition and structure of corrosion product film formed in 70/30 copper-nickel alloy10.1108/ACMM-01-2021-2422 ↗
15. Corrosion characteristic of Cu-10Ni-Fex in 3.5% NaCl10.20964/2018.12.11 ↗
16. Effects of Fe content on the microstructure and properties of CuNi10FeMn1 alloy tubes fabricated by HCCM horizontal continuous casting10.1007/s12613-016-1255-7 ↗
17. Effect of Fe/Mn content on mechanical and corrosion properties of 90/10 copper–nickel alloy10.1002/maco.202112748 ↗
18. Investigation of corrosion characteristics of Cu-10Ni-1.2Fe-xMn (x=0.53, 0.87, 1.19) alloy in 3.5% NaCl solution10.1039/D0RA10678J ↗
19. Effect of Cr addition on corrosion behavior of cupronickel alloy in 3.5 wt% NaCl solution10.1016/j.jmrt.2022.12.079 ↗
20. Effect of Cr on the corrosion resistance of Cu-6Ni-4Sn alloys10.1016/j.jallcom.2007.01.139 ↗
21. Effect of Al element on the microstructure and properties of Cu-Ni-Fe-Mn alloys10.3390/ma11091777 ↗
22. Electrochemical behavior of mechanically alloyed hard Cu-Al alloys in marine environment10.1016/j.corsci.2019.03.043 ↗
23. Scarcity of rare earth elements10.1002/cssc.201200794 ↗
24. Effects of Ce and Y addition on microstructure evolution and precipitation of Cu-Mg alloy hot deformation10.1016/j.jallcom.2018.12.022 ↗
25. Application of rare-earth element Y in refining impure copper10.1007/s12613-015-1093-z ↗
26. Influence of rare earth metals addition on the corrosion behaviour of copper in alkaline environment10.1016/j.corsci.2012.01.022 ↗
27. Influence of rare earth elements on mechanical properties and corrosion resistance of Cu-15Ni alloy
28. Influence of rare earth elements on corrosion resistance of BFe10-1-1 alloys in flowing marine water10.1016/S1002-0721(08)60231-8 ↗
29. Effect of Ni content on microstructure and characterization of Cu-Ni-Sn alloys10.3390/ma11071108 ↗
30. Enhanced softening resistance and mechanical properties of Cu-Ni-Sn alloy with Al, Zn and Si micro-alloying10.1016/j.jallcom.2022.166410 ↗
31. Effect of trace yttrium on properties and microstructure of Cu-0.6Cr-0.15Zr-0.05Mg-0.02Si alloy10.4028/www.scientific.net/AMR.239-242.338 ↗
32. Synthesis of functionalized Graphene/Polyaniline nanocomposites with effective synergistic reinforcement on anticorrosion10.1021/acs.iecr.6b01975 ↗
33. R. Winston. R., Uhlig's Corrosion Handbook, third Ed., Wiley, New York, 2011. https://doi.org/10.1002/9780470872864.10.1002/9780470872864 ↗
34. Effects of nanoscale Sn segregation on corrosion behavior of laser powder bed fusion Cu-15Ni-8Sn alloy10.1016/j.jmst.2023.01.056 ↗
35. Electrochemical behaviour of copper in neutral aerated chloride solution. I. Steady-state investigation10.1007/BF01093751 ↗
36. Surface characterization and corrosion behavior of 90/10 copper-nickel alloy in marine environment10.3390/ma12111869 ↗
37. Tarnishing and Cu ion release in selected copper-base alloys: implications towards antimicrobial functionality10.1016/j.electacta.2015.04.001 ↗
38. Experimental and density functional studies on the corrosion behavior of the copper-nickel-tin alloy10.1016/j.cplett.2011.04.100 ↗
39. Effect of thermo-mechanical treatments on corrosion behavior of Cu-15Ni-8Sn alloy in 3.5wt% NaCl solution10.1016/j.matchemphys.2017.06.041 ↗
40. Corrosion and corrosive-wear behaviors of a high strength and toughness Cu-15Ni-8Sn alloy in seawater10.1002/maco.201911323 ↗
41. Corrosion product film formed on the 90/10 copper-nickel tube in natural seawater: Composition/structure and formation mechanism10.1016/j.corsci.2014.11.028 ↗