Enhancing the mechanical properties and thermal conductivity of Ti/AZ91 composites through integrated extrusion and rolling continuous deformation processing
Source abstract
Abstract
With the increasing demand for highly integrated circuits to optimize energy efficiency, reduce weight, and improve mechanical properties, finding a Magnesium (Mg) matrix material with excellent mechanical strength and high thermal conductivity poses a significant challenge. In this work, titanium (Ti) particles were introduced into AZ91 (Mg-9Al-1Zn) alloy to fabricate Ti/AZ91 composites, employing a combination of stir casting, extrusion and rolling processes. This strategy simultaneously enhances the mechanical properties and thermal conductivity of the Ti/AZ91 composites compared with AZ91 alloy. The incorporation of Ti particles serves to refine grains, expediting the formation of Mg 17Al 12 phase within the Mg matrix. Optimal comprehensive mechanical properties are attained in 10 wt% Ti/AZ91 composite, exhibiting an ultimate tensile strength of 365 MPa, an elongation of 11.9 %, and a significantly low wear rate of 4.548×10 −3 mm 3 /m. Notably, the 10 wt% Ti/AZ91 composite shows a 41.1 % reduction in wear rate relative to the AZ91 alloy, attributed to the incorporation of hard Ti particles. Furthermore, the thermal conductivity of the 2.5 wt% Ti/AZ91 composite exhibits a significant enhancement over that of the AZ91 alloy. Detailed discussions are provided on the fundamental mechanisms responsible for strengthening, wear resistance, and thermally conductive in Ti/AZ91 composites. These results highlight the substantial potential of Ti/AZ91 composites for lightweight structural applications, such as highly integrated circuits requiring excellent mechanical properties and high thermal conductivity.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Applications of magnesium alloys for aerospace: a review10.1016/j.jma.2023.09.015 ↗
2. Research and development in magnesium alloys for industrial and biomedical applications a review10.1007/s12540-019-00346-8 ↗
3. High temperature mechanical behavior of low-pressure sand-cast Mg-Gd-Y-Zr magnesium alloy10.1016/j.jma.2019.07.006 ↗
4. Microstructures and mechanical properties of AZ31 magnesium alloys fabricated via vacuum hot-press sintering10.1016/j.jallcom.2021.159473 ↗
5. Microstructure, mechanical properties and wear resistance of SiCp/AZ91 composite prepared by vacuum pressure infiltration10.1016/S1003-6326(21)65781-3 ↗
6. Influence of Ti-6Al-4V particles on the interfacial microstructure and strength-ductility synergetic mechanism of AZ91 magnesium alloy10.1016/j.matchar.2022.112154 ↗
7. Carbon nanotube and graphene reinforced magnesium matrix composites: a state-of-the-art review10.1016/j.jma.2023.05.010 ↗
8. Mechanical and microstructural characterization of AZ31 magnesium‑carbon fiber reinforced polymer joint obtained by friction stir interlocking technique10.1016/j.matdes.2020.109305 ↗
9. Effect of Ti-6Al-4V particle reinforcements on mechanical properties of Mg-9Al-1Zn alloy10.1016/S1003-6326(22)66016-3 ↗
10. The tensile deformation and fracture behavior of a magnesium alloy nanocomposite reinforced with nickel10.12989/amr.2012.1.3.169 ↗
11. Mechanical properties and corrosion resistance of powder metallurgical Mg-Zn-Ca/Fe bulk metal glass composites for biomedical application10.1016/j.jmst.2021.07.006 ↗
12. Influence of micron-Ti and nano-Cu additions on the microstructure and mechanical properties of pure magnesium10.3390/met2030274 ↗
13. Microstructures and mechanical properties of titanium-reinforced magnesium matrix composites: review and perspective10.1016/j.jma.2022.07.008 ↗
14. Effect of interfacial structure on grain refinement and strength of Ti particles reinforced AZ31 composites10.1016/j.vacuum.2022.111287 ↗
15. Cryogenic tensile properties and deformation behavior of a superhigh strength metastable beta titanium alloy Ti-15Mo-2Al10.1016/j.msea.2021.141344 ↗
16. Microstructure, texture and mechanical properties of the rolled high modulus Mg-Y-Zn-Al-Li alloy10.1016/j.msea.2021.142242 ↗
17. Wettability of pure Ti by molten pure Mg droplets10.1016/j.actamat.2009.09.039 ↗
18. Microstructure and properties of mechanically milled AZ61 powders dispersed with submicron/nanometer Ti particulates10.1016/j.matchar.2017.03.017 ↗
19. Effect of Ti particles on the LPSO phase and mechanical properties of Tip/VW94 composites10.1016/j.jmrt.2023.06.172 ↗
20. Effect of micron-Ti particles on microstructure and mechanical properties of Mg-3Al-1Zn based composites10.1016/j.msea.2021.142526 ↗
21. Effects of hot extrusion on microstructure and mechanical properties of Mg matrix composite reinforced with deformable TC4 particles10.1016/j.jma.2019.05.015 ↗
22. Investigating the microstructure-property relationship in Mg matrix composites reinforced by particles of different sizes using experiments combined with finite element simulation10.1016/j.powtec.2023.119220 ↗
23. Enhanced tensile properties and wear resistance of Tip/AZ31 composites prepared by hot-press sintering10.1016/j.jmrt.2024.01.175 ↗
24. Effects of ZnO addition on the microstructure/corrosion, wear and mechanical properties of sintered Mg-Al matrix composites10.1016/j.jallcom.2023.170500 ↗
25. Dry tribological behavior of Mg/SiCp composites at room and elevated temperatures10.1016/j.wear.2015.11.021 ↗
26. Microstructure, mechanical properties and wear performance of AZ31 matrix composites reinforced by graphene nanoplatelets (GNPs)10.1016/j.jallcom.2018.04.035 ↗
27. Quantitative study of microstructural, textural and hardness evolution of high-purity Ti sheet during rolling from low to medium strains
28. Dry sliding wear behavior of globular AZ91 magnesium alloy and AZ91/SiCp composites
29. Effect of grain size on low-temperature electrical resistivity and thermal conductivity of pure magnesium10.1016/j.matlet.2018.07.037 ↗
30. Thermal and electrical conductivity of binary magnesium alloys10.1007/s10853-013-8012-3 ↗
31. Phonon-dislocation interaction and its impact on thermal conductivity10.1063/5.0054078 ↗
32. Microstructure and mechanical properties of as-cast AZ91 magnesium alloy
33. Microstructure, mechanical properties and wear resistance of Ti particles reinforced AZ31 magnesium matrix composites10.1016/j.jma.2022.06.012 ↗
34. Influence of SiC nanoparticle contents on microstructural evolution and mechanical behavior of AZ91D magnesium matrix composites synthesised through a combination of a master pellet feeding technique and stir casting assisted by ultrasonic vibration
35. Simultaneously improving the strength and ductility of extruded bimodal size SiCp/AZ61 composites: Synergistic effect of micron/nano SiCp and submicron Mg17Al12 precipitates10.1016/j.msea.2018.11.023 ↗
36. Aging behavior of squeeze cast SiCw/AZ91 magnesium matrix composite10.1016/S0921-5093(02)00638-X ↗
37. Effect of particle size ratio and particle clustering on sintering and stiffness of aluminium matrix composite10.1179/174329006X113463 ↗
38. Mechanical behavior of particle reinforced metal matrix composites10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
39. Enhanced overall strength and ductility of magnesium matrix composites by low content of graphene nanoplatelets10.1016/j.compositesa.2017.05.011 ↗
40. High-strength wrought magnesium alloy with dense nano-scale spherical precipitate10.1007/s11434-007-0250-9 ↗
41. Effect of substitution of Zn with Ni on microstructure evolution and mechanical properties of LPSO dominant Mg-Y-Zn alloys10.1016/j.msea.2019.138735 ↗
42. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
43. Brittle crack propagation resistance inside grain and at high angle grain boundary in 3% Si-Fe alloy10.1016/j.actamat.2017.11.020 ↗
44. Effect of pre-homogenizing treatment on microstructure and mechanical properties of hot-rolled AZ91 magnesium alloys10.1016/j.jma.2016.04.002 ↗
45. Influence of Ti particle sizes on microstructure and mechanical behaviors of AZ91-Ti composites under different loading paths10.1016/j.msea.2023.145723 ↗
46. Microstructure and mechanical properties of hybrid graphene nanoplatelets/titanium particles reinforced AZ91 laminated composite10.1016/j.msea.2022.144017 ↗
47. Enhancement of strength and ductility of SiCp/AZ91 composites by RD-ECAP processing10.1016/j.msea.2019.138579 ↗
48. Interfacial design and strengthening mechanisms of AZ91 alloy reinforced with in-situ reduced graphene oxide10.1016/j.matchar.2018.02.011 ↗
49. Reinforced AZ91D magnesium alloy with thixomolding process facilitated dispersion of graphene nanoplatelets and enhanced interfacial interactions10.1016/j.msea.2021.140793 ↗
50. Development of titanium particulate reinforced AZ31 magnesium matrix composites via friction stir processing10.1016/j.jallcom.2019.153071 ↗
51. Dynamic recrystallization behavior and mechanical properties of bimodal scale Al2O3 reinforced AZ31 composites by soild state synthesis10.1016/j.jma.2020.02.012 ↗
52. Effect of hot extrusion on microstructures and properties of TiB2/AZ31 magnesium based composites10.1016/S1875-5372(11)60053-2 ↗
53. On the running-in nature of metallic tribo-components: a review10.1016/j.wear.2021.203871 ↗
54. A high performance Mg-Al-Ca alloy processed by high pressure die casting: Microstructure, mechanical properties and thermal conductivity10.1016/j.msea.2022.143500 ↗
55. Microstructure and tensile properties of micro-SiC particles reinforced magnesium matrix composites produced by semisolid stirring assisted ultrasonic vibration10.1016/j.msea.2011.08.035 ↗
56. Effect of hot extrusion on the microstructure of a particulate reinforced magnesium matrix composite10.1016/j.msea.2007.03.077 ↗
57. Effects of heat treatment on mechanical properties of an extruded Mg-4.3Gd-3.2Y-1.2Zn-0.5Zr alloy and establishment of its Hall-Petch relation10.1016/j.jma.2020.09.023 ↗
58. Dynamic precipitation and deformation behaviors of a bimodal-grained WE43 alloy with enhanced mechanical properties10.1016/j.ijplas.2023.103682 ↗
59. Grain size effect on tensile properties and slip systems of pure magnesium10.1016/j.actamat.2020.116604 ↗
60. A review of methods of random surface topography modeling10.1016/j.triboint.2020.106530 ↗
61. Hall-Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
62. In situ formation behaviors of Al8Mn5 particles in Mg-Al alloys10.1016/j.jallcom.2005.08.111 ↗
63. Mg17Al12 phase refinement and the improved mechanical performance of Mg-6Al alloy with trace erbium addition10.1016/j.msea.2021.141075 ↗
64. High-temperature thermal conductivity of transition metal carbides and nitrides10.1111/j.1151-2916.1966.tb15395.x ↗
65. Comparison of the thermal properties of AM20 and AS21 magnesium alloys10.1016/j.msea.2004.12.036 ↗
66. Thermal diffusivity and thermal conductivity of MgSc alloys10.1016/S0925-8388(99)00444-2 ↗
67. Effect of La content on microstructure, thermal conductivity and mechanical properties of Mg-4Al magnesium alloys10.1016/j.jallcom.2019.07.267 ↗
68. Thermal conductivity of as-cast and as-extruded binary Mg-Al alloys10.1016/j.jallcom.2014.04.107 ↗