journal article·2024-07

In-situ conversion of residual alkali into fast-ion conductor coating and synchronously realizing gradient Mo4+ doping to stabilize LiNi0.9Mn0.1O2 cathode

Feilong Zhang, Baoqiang Li, Chengyu Li, Shiyou Li, Ningshuang Zhang, Xin’an Zhou, Cankun Gao, Kerong Yang, Yue Gao, Dongni Zhao, Xiaoling Cui

Publisher page

Abstract

The surficial residual alkali is a key factor that leads to aggravated phase transition and decay in cobalt-free high-nickel cathode. In this paper, we develop a one-step in-situ modification technique to convert the residual alkali on the LiNi 0.9Mn 0.1O 2 (NM91) surface into Li 2MoO 4 coating. As a fast ionic conductor, Li 2MoO 4 coating not only facilitate Li + diffusion, but also inhibits the transition from layered to rock salt phase on the cathode surface. Moreover, the multi-aperture architecture formed in the conversion promotes the high-valent Mo enter-into the lattice and realizes the gradient doping of Mo 4+ through thermodynamic diffusion. Due to the pillar effect, Mo doping increases c-axis spacing, mitigates cation mixing, and reduces the irreversible H2-H3 phase transition. As a result, both the Li + diffusion kinetics and thermodynamic stability are improved. Consequently, the as-prepared Mo modified NM91 exhibits an increased capacity retention from original 62.3–75.6 % (100 cycles, 0.2 C) and enhanced rate capability of 131.96 mAh g −1 at 5.0 C. This work provides a facile “reducing alkali” technological process, and lays foundation for the material design and performance optimization of high energy density cathodes in lithium-ion batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. A new cathode material for batteries of high energy density10.1016/0025-5408(80)90012-4 ↗
2. Constructing stable Li-solid electrolyte interphase to achieve dendrites-free solid-state battery: a nanointerlayer/Li pre-reduction strategy10.1007/s12274-022-4362-y ↗
3. A highly stable and flexible zeolite electrolyte solid-state Li-air battery10.1038/s41586-021-03410-9 ↗
4. Recent break throughs and perspectives of high-energy layered oxide cathode materials for lithium-ion batteries10.1016/j.mattod.2020.10.028 ↗
5. Optimization of the composition of the Li1-zNi1+zO2 electrode materials: structural, magnetic, and electrochemical studies10.1149/1.1836614 ↗
6. Child labour, Cobalt and the London Metal Exchange: Fetish, fixing and the limits of financialization10.1080/03085147.2021.1899659 ↗
7. Research towards a sustainable course
8. Enhanced cyclic stability of NCM-622 cathode by Ti3+ doped TiO2 coating10.1016/j.jallcom.2021.159664 ↗
9. Long-life, ultrahigh-nickel cathodes with excellent air storage stability for high-energy density lithiumbased batteries10.1021/acs.chemmater.0c02374 ↗
10. Degradation effects on the surface of commercial LiNi0.5Co0.2Mn0.3O2 electrodes10.1016/j.jpowsour.2016.09.071 ↗
11. Understanding the degradation mechanisms of LiNi0.5Co0.2Mn0.3O2 cathode material in lithium ion batteries10.1002/aenm.201300787 ↗
12. Comprehensive understanding of Li/Ni intermixing in layered transition metal oxides10.1016/j.mattod.2021.09.013 ↗
13. Structural changes and thermal stability of charged LiNixMnyCozO2 cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy10.1021/am506712c ↗
14. Ni-Rich/Co-poor layered cathode for automotive Li-ion batteries: promises and challenges
15. Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries10.1038/s41560-018-0191-3 ↗
16. High-thermal-and air-stability cathode material with concentration-gradient buffer for Li-ion batteries10.1021/acsami.7b14684 ↗
17. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries10.1002/anie.201409262 ↗
18. Role of Mn content on the electrochemical properties of nickel-rich layered LiNi0.8–xCo0.1Mn0.1+xO2 (0.0≤x≤0.08) cathodes for lithium-ion batteries10.1021/acsami.5b00788 ↗
19. Chemical reactivity descriptor for the oxide-electrolyte interface in Li-ion10.1021/acs.jpclett.7b01655 ↗
20. Study of immersion of LiNi0.5Mn0.3Co0.2O2 material in water for aqueous processing of positive electrode for Li-Ion batteries10.1021/acsami.9b00999 ↗
21. Investigating the relationship between internal short circuit and thermal runaway of lithium-ion batteries under thermal abuse condition10.1016/j.ensm.2020.10.020 ↗
22. Understanding the mechanism of performance difference when substituting Al for different transition metal ions in Li-rich Mn-based cathode materials10.1016/j.actamat.2023.119220 ↗
23. Ultra-high-voltage Ni-rich layered cathodes in practical Li metal batteries enabled by a sulfonamide-based electrolyte10.1038/s41560-021-00792-y ↗
24. An effective doping strategy to improve the cyclic stability and rate capability of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode10.1016/j.cej.2020.126195 ↗
25. Tailoring the Al distribution in secondary particles for optimizing the electrochemical performance of LiNi0.8Co0.1Mn0.1O210.1016/j.ceramint.2021.01.161 ↗
26. Preparation and electrochemical characterization of La and Al Co-doped NCM811 cathode materials10.1021/acsomega.1c01552 ↗
27. An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes
28. An effective strategy to control thickness of Al2O3 coating layer on nickel-rich cathode materials10.1016/j.jelechem.2020.114910 ↗
29. Enhancement on structural stability of Ni-rich cathode materials by in-situ fabricating dual-modified layer for lithium-ion batteries
30. Ultrathin ZrO2 on LiNi0.5Mn0.3Co0.2O2 electrode surface via atomic layer deposition for high-voltage operation in lithium-ion batteries10.1016/j.apsusc.2019.04.123 ↗
31. Suppressing structural degradation of Ni-rich cathode materials towards improved cycling stability enabled by a Li2MnO3 coating10.1039/D0TA00924E ↗
32. Simultaneously dual modification of Ni-rich layered oxide cathode for high-energy lithium-ion batteries
33. Dual elements coupling effect induced modification from the surface into the bulk lattice for Ni-rich cathodes with suppressed capacity and voltage decay10.1021/acsami.9b18946 ↗
34. Utilizing fast ion conductor for single-crystal Ni-rich cathodes to achieve dual-functional modification of conductor network constructing and near-surface doping10.1016/j.ensm.2022.07.029 ↗
35. Simultaneous Li2MoO4 coating and Mo6+ doping improves the structural stability and electrochemical properties of nickel-rich LiNi0.83Co0.11Mn0.06O210.1016/j.apsusc.2022.154101 ↗
36. Novel amorphous MoS2/MoO3/nitrogen-doped carbon composite with excellent electrochemical performance for lithium-ion batteries and sodium ion batteries10.1021/acssuschemeng.7b01595 ↗
37. New Insight into microstructure engineering of Ni-Rich layered oxide cathode for high performance lithium ion batteries10.1002/adfm.202010095 ↗
38. Effect of Nb2O5 nanocoating on the thermal stability and electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode materials for lithium ion batteries10.1016/j.jallcom.2021.160415 ↗
39. Problems and their origins of Ni-rich layered oxide cathode materials10.1016/j.ensm.2019.08.013 ↗
40. Simultaneously dual modification of Ni-rich layered oxide cathode for high-energy lithium-ion batteries
41. A perspective on single-crystal layered oxide cathodes for lithium-ion batteries10.1016/j.ensm.2021.02.003 ↗
42. Highly stabilized Ni-rich cathode material with Mo induced epitaxially grown nanostructured hybrid surface for high-performance lithium-ion batteries10.1021/acsami.9b03403 ↗
43. Studies on stability and capacity for long-life cycle performance of Li(Ni0.5Co0.2Mn0.3)O2 by Mo modification for lithium-ion battery10.1016/j.jpowsour.2017.05.013 ↗
44. Optimization of B2O3 coating process for NCA cathodes to achieve long-term stability for application in lithium ion batteries10.1016/j.energy.2021.119913 ↗
45. B-doped and La4NiLiO8-coated Ni-rich cathode with enhanced structural and interfacial stability for Lithium-ion batteries10.1016/j.jechem.2022.04.037 ↗
46. Design and tailoring of carbon-Al2O3 double coated nickel-based cation-disordered cathodes towards high-performance Li-ion batteries10.1016/j.nanoen.2022.107071 ↗
47. Performance of Al-doped LiNi1/3Co1/3Mn1/3O2 synthesized from spent lithium ion batteries by sol-gel method10.1016/j.vacuum.2019.109105 ↗
48. The nature of irreversible phase transformation propagation in nickel-rich layered cathode for lithium-ion batteries10.1016/j.jechem.2021.03.035 ↗
49. Ultrafine Ni2P nanoparticles embedded in one-dimensional carbon skeleton derived from metal-organic frameworks template as a high-performance anode for lithium-ion battery10.1016/j.jallcom.2018.10.058 ↗
50. Ultrafine cobalt phosphide nanoparticles embedded in nitrogen-doped carbon matrix as a superior anode material for lithium-ion batteries10.1002/admi.201700377 ↗
51. Regulative electronic redistribution of CoTe2/CoP heterointerfaces for accelerating water splitting10.1016/j.apcatb.2023.122551 ↗
52. Constructing CoO/Mo2C heterostructures with interfacial electron redistribution induced by work functions for boosting overall water splitting10.1002/smll.202304086 ↗