The role of graphene interlayer slipping on the deformation behavior of graphene/copper composite
Source abstract
Abstract
In recent years, graphene/copper (Gr/Cu) composites have shown great potential in various fields. In practical applications, graphene can influence the microstructure of metal materials during deformation, and therefore change their macroscopic properties. Hence it is very important to study the deformation behavior of graphene in metals. In this study, a comparative investigation was undertaken between pure copper (pure Cu) and Gr/Cu composite, focusing on the mutual constraints between grains and the intra-grain deformation behavior. After rolling, pure Cu grains exhibit large orientation differences inside the grains, while the Gr/Cu composite shows a more uniform orientation within the grains. This discrepancy results from the graphene sheets interlayer slipping mechanism, which influences the slip and rotation of grains, thereby affecting the grain orientation spread (GOS) within the grains. The present research reveals the key role of graphene within the deformation of Gr/Cu composite, thereby providing critical insights for understanding and optimizing the deformation behavior of materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Graphene research and applications · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Experimental observation of the quantum Hall effect and Berry's phase in graphene10.1038/nature04235 ↗
2. Measurement of the elastic properties and intrinsic strength of monolayer graphene10.1126/science.1157996 ↗
3. A route to high surface area, porosity and inclusion of large molecules in crystals10.1038/nature02311 ↗
4. The structure of suspended graphene sheets10.1038/nature05545 ↗
5. Graphene and graphene oxide: synthesis, properties, and applications10.1002/adma.201001068 ↗
6. Mesoporous graphene-like carbon sheet: high-power supercapacitor and outstanding catalyst support10.1039/C4TA02307B ↗
7. Graphene: status and prospects10.1126/science.1158877 ↗
8. Effect of ball-milling and graphene contents on the mechanical properties and fracture mechanisms of graphene nanosheets reinforced copper matrix composites10.1016/j.jallcom.2016.08.303 ↗
9. Multi-layer graphene/copper composites: Preparation using high-ratio differential speed rolling, microstructure and mechanical properties10.1016/j.carbon.2013.11.058 ↗
10. High-yield ball-milling synthesis of extremely concentrated and highly conductive graphene nanoplatelet inks for rapid surface coating of diverse substrates10.1016/j.carbon.2017.05.065 ↗
11. Preparation mechanism of hierarchical layered structure of graphene/copper composite with ultrahigh tensile strength10.1016/j.carbon.2017.10.095 ↗
12. High strength and ductility of graphene-like carbon nanosheet/copper composites fabricated directly from commercial oleic acid coated copper powders10.1039/C8NR04451A ↗
13. Achieving high strength and high ductility in metal matrix composites reinforced with a discontinuous three-dimensional graphene-like network10.1039/C6NR07335B ↗
14. Fabrication of in-situ grown graphene reinforced Cu matrix composites
15. Multilayered graphene grafted copper wires10.1016/j.carbon.2018.07.033 ↗
16. Synthesis of cable-like copper nanowires10.1002/adma.200390054 ↗
17. Continuous patterning of copper nanowire-based transparent conducting electrodes for use in flexible electronic applications10.1021/acsnano.6b03626 ↗
18. Enhanced mechanical properties of graphene (reduced graphene oxide)/aluminum composites with a bioinspired nanolaminated structure10.1021/acs.nanolett.5b03492 ↗
19. Regain strain-hardening in high-strength metals by nanofiller incorporation at grain boundaries10.1021/acs.nanolett.8b02375 ↗
20. Coordinated matrix deformation induced ductility in multilayer graphene/aluminum composites10.1016/j.carbon.2022.10.034 ↗
21. Microstructure, mechanical properties and electrical conductivity of industrial Cu–0.5 %Cr alloy processed by severe plastic deformation10.1016/j.msea.2010.10.059 ↗
22. Mechanical and electrical properties of an ultrafine grained Al–8.5wt% RE (RE=5.4wt% Ce, 3.1wt% La) alloy processed by severe plastic deformation10.1016/j.matdes.2015.10.163 ↗
23. On the dependence of in-grain subdivision and deformation texture of aluminum on grain interaction10.1016/S1359-6454(02)00276-8 ↗
24. Work hardening behavior and microstructure evolution of a Cu-Ti-Cr-Mg alloy during room temperature and cryogenic rolling
25. FCC rolling textures reviewed in the light of quantitative comparisons between simulated and experimental textures10.1080/10408436.2014.899485 ↗
26. A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction10.1016/j.msea.2017.10.062 ↗
27. A study of the heterogeneity of plastic deformation in IF steel by EBSD10.1016/j.msea.2012.03.068 ↗
28. A high strength and high electrical conductivity graphene/Cu composite with good high-temperature stability10.1016/j.matchar.2023.112928 ↗
29. Problem of lattice rotation due to plastic deformation. example of rolling of f.c.c materials
30. Formation mechanism of dislocation network of cell structure in cyclically deformed near-[1‾11] copper single crystals10.1016/j.msea.2023.145287 ↗
31. Hot rolling behavior of graphene/Cu composites10.1016/j.jallcom.2019.153204 ↗
32. Fabrication of graphene/copper nanocomposites via in-situ delamination of graphite in copper by accumulative roll-compositing10.1016/j.compositesb.2021.108850 ↗
33. Electrodeposition-based fabrication of graphene/copper composites with excellent overall properties10.1016/j.jallcom.2022.166610 ↗