journal article·2024-04

Ionic-conductive sodium titanate to boost sodium-ion transport kinetics of hard carbon anode in sodium-ion batteries

Feng Wang, Fan Li, Hao Gong, Yanlei Zhang, Xinyu Liu, Zhenming Jiang, Lian Chen, Jianying Huang, Yanyan Zhang, Yinzhu Jiang, Binmeng Chen, Yuxin Tang

Publisher page

Abstract

Hard carbon with abundant resources, low-cost, and high specific capacity, is a promising anode material for large-scale sodium-ion batteries. However, the poor rate performance of hard carbon suffers from serious challenges due to sluggish ion transport dynamic behavior, especially at low potential, in high power density of sodium-ion batteries. To address this issue, we introduce an ionic-conductive sodium-titanate into hard carbon to boost its sodium-ion transport kinetics via constructing a dual ionic-electronic conducting network in hard carbon anode. Benefiting from our design, the optimized hard carbon-sodium titanate electrode achieves high specific capacity of 137 mAh g −1 at a high current density of 10 A g −1, compared to that of hard carbon of 25 mAh g −1 at 10 A g −1. Remarkably, it also exhibits an excellent capacity retention of 71.4% at the current density of 2.0 A g −1 after 800 cycles. This work presents a practical strategy for high-rate hard carbon design and provides valuable insights into the construction of high-rate anode for advanced sodium-ion batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Fundamentals, status and promise of sodium-based batteries10.1038/s41578-021-00324-w ↗
2. Rational material design for ultrafast rechargeable lithium-ion batteries10.1039/C4CS00442F ↗
3. Temperature-dependent synthesis of SnO2 or Sn embedded in hollow porous carbon nanofibers toward customized lithium-ion batteries10.1007/s40843-022-2301-y ↗
4. Electrode materials for sodium-ion batteries: considerations on crystal structures and sodium storage mechanisms10.1007/s41918-018-0009-9 ↗
5. High-power and low-cost sodium-ion batteries with a wide operation temperature from −70 °C to 130 °C10.1002/smm2.1191 ↗
6. Carbon-based anode materials for potassium-ion batteries: From material, mechanism to performance10.1002/smm2.1042 ↗
7. Tailoring the growth of iron hexacyanoferrates for high-performance cathode of sodium-ion batteries10.1016/j.jallcom.2023.169284 ↗
8. Marching towards flexible intelligent materials10.1007/s40843-022-2161-9 ↗
9. A multifunctional interphase layer enabling superior sodium-metal batteries under ambient temperature and −40 °C10.1002/adma.202209511 ↗
10. Molecular engineering on solvation structure of carbonate electrolyte toward durable sodium metal battery at −40 °C10.1002/anie.202301169 ↗
11. Towards defect-free Prussian blue-based battery electrodes10.1016/j.jallcom.2023.169886 ↗
12. Conversion-alloying anode materials for sodium ion batteries10.1002/smll.202101137 ↗
13. Toward atomistic understanding of materials with the conversion–alloying mechanism in Li-ion batteries10.1021/acs.chemmater.2c03603 ↗
14. A facile synthesis of Fe3O4/C composite with high cycle stability as anode material for lithium-ion batteries10.1016/j.jpowsour.2013.03.073 ↗
15. Low-carbon and energy-efficient strategy to convert CO2 into carbons with tunable graphitization degree as lithium storage materials toward ultra-long cycle life10.1016/j.jallcom.2023.172005 ↗
16. Lithium alloys and metal oxides as high-capacity anode materials for lithium-ion batteries10.1016/j.jallcom.2013.04.001 ↗
17. Rational design of carbon nanomaterials for electrochemical sodium storage and capture
18. Revitalizing sodium-ion batteries via controllable microstructures and advanced electrolytes for hard carbon
19. Sodium–gallium alloy layer for fast and reversible sodium deposition10.1002/sus2.97 ↗
20. Step-by-step desolvation enables high-rate and ultra-stable sodium storage in hard carbon anodes10.1073/pnas.2210203119 ↗
21. Electrode–electrolyte interfacial chemistry modulation for ultra-high rate sodium-ion batteries10.1002/anie.202200475 ↗
22. Unveiling the effects of Cr single atoms with controllable configurations on solid electrolyte interphase and storage mechanism of sodium ions
23. Zinc single-atom-regulated hard carbons for high-rate and low-temperature sodium-ion batteries10.1002/adma.202211461 ↗
24. Three-dimensional N/O co-doped hard carbon anode enabled superior stabilities for sodium-ion batteries10.1016/j.cej.2023.144237 ↗
25. Modulating the graphitic domains of hard carbons derived from mixed pitch and resin to achieve high rate and stable sodium storage10.1002/smll.202105568 ↗
26. A general synthesis of single atom catalysts with controllable atomic and mesoporous structures10.1038/s44160-022-00129-x ↗
27. Single-atom catalysis in organic synthesis10.1002/anie.202219306 ↗
28. Direct growth of single-metal-atom chains10.1038/s44160-022-00038-z ↗
29. Correlating the Peukert’s constant with phase composition of electrode materials in fast lithiation processes10.1021/acsmaterialslett.9b00320 ↗
30. Conductive inks based on a lithium titanate nanotube gel for high-rate lithium-ion batteries with customized configuration10.1002/adma.201505161 ↗
31. Mechanical force-driven growth of elongated bending TiO2-based nanotubular materials for ultrafast rechargeable lithium ion batteries10.1002/adma.201402000 ↗
32. Nanowires in energy storage devices: structures, synthesis, and applications10.1002/aenm.201802369 ↗
33. Pyrolysis of enzymolysis‐treated wood: hierarchically assembled porous carbon electrode for advanced energy storage devices
34. Co3O4 nanoparticles anchored on stable Na2Ti2O5 nanobelts for improved lithium storage10.1016/j.apsusc.2022.154273 ↗
35. High-performance Na2Ti2O5 nanowire arrays coated with VS2 nanosheets for sodium-ion storage10.1016/j.nanoen.2015.09.014 ↗
36. Robust and conductive Na2Ti2O5–x nanowire arrays for high-performance flexible sodium-ion capacitor10.1021/acs.chemmater.7b02864 ↗
37. Inspired by wood: thick electrodes for supercapacitors10.1021/acsnano.3c01241 ↗
38. Phosphorus-doped thick carbon electrode for high-energy density and long-life supercapacitors10.1016/j.cej.2021.128767 ↗
39. Black phosphorus stabilizing Na2Ti3O7/C each other with an improved electrochemical property for sodium-ion storage10.1021/acsami.8b14971 ↗
40. Ultrathin titanate nanosheets/graphene films derived from confined transformation for excellent Na/K ion storage10.1002/anie.201803511 ↗
41. Surface modification of Na2Ti3O7 nanofibre arrays using N-doped graphene quantum dots as advanced anodes for sodium-ion batteries with ultra-stable and high-rate capability10.1039/C9TA01641D ↗
42. Improve the electrochemical performance of Na2Ti3O7 nanorod through pitch coating10.1021/acssuschemeng.2c00047 ↗
43. Ultrahigh phosphorus doping of carbon for high-rate sodium ion batteries anode10.1002/aenm.202003911 ↗
44. Ultrahigh-rate-performance hierarchical structured Na2Ti2O5@RGO sodium-ion batteries and revealing the storage mechanism using in situ raman spectroscopy10.1021/acs.jpcc.0c02278 ↗
45. Method for regulating carbon microcrystalline structure for high-capacity sodium storage: binding energy as descriptor10.1021/acsnano.3c08889 ↗
46. Vanadium-modified hard carbon spheres with sufficient pseudographitic domains as high-performance anode for sodium-ion batteries10.1002/cey2.191 ↗
47. Dual-functionalized Ca enables high sodiation kinetics for hard carbon in sodium-ion batteries10.1021/acsami.3c16484 ↗
48. Electrochemical study of pseudocapacitive behavior of Ti3C2Tx MXene material in aqueous electrolytes10.1016/j.ensm.2018.12.017 ↗
49. Understanding and calibration of charge storage mechanism in cyclic voltammetry curves10.1002/anie.202104167 ↗
50. Design of wood-derived anisotropic structural carbon electrode for high-performance supercapacitor10.1007/s00226-022-01389-8 ↗
51. Wood-derived high-mass-loading MnO2 composite carbon electrode enabling high energy density and high-rate supercapacitor
52. Wood-derived, conductivity and hierarchical pore integrated thick electrode enabling high areal/volumetric energy density for hybrid capacitors
53. High Na+ mobility in rGO wrapped high aspect ratio 1D SbSe nano structure renders better electrochemical Na+ battery performance10.1002/cphc.201901011 ↗
54. Anatase TiO2 as a Na+-storage anode active material for dual-ion batteries10.1021/acsami.9b09703 ↗