journal article·2024-04

Enhancing microstructural control, tribological and electrochemical performances of laser powder bed fusion processed nickel superalloys through in-situ remelting

Hongmei Zhang, Yi Wang, Zhanfeng Wang, Changyu Wang, Kaiyu Luo, Meifeng Guo, Peiling Zhang, Jinzhong Lu, Wei Xue

Publisher page

Abstract

Laser remelting stands as a fundamental technique in augmenting microstructure and properties for alloys. In this study, the microstructural development, tribological and electrochemical behaviors of laser powder bed fusion (LPBF) processed Inconel 718 with variations in in-situ remelting scan speed ( v) were investigated. At an optimal v of 1200 mm/s, a remarkable confluence of superior wear resistance (wear rate: 5.78 ×10 −6 mm 3 /N·m) and corrosion protection (corrosion current density: 0.72 ×10 −6 ± 0.1 Acm −2 ) were achieved. These enhanced surface properties were intricately linked to factors such as heightened densification, carbide precipitates, and a substantial prevalence of low angle grain boundaries (LAGBs). Contrastingly, escalation of v to 2000 mm/s led to insufficient laser remelting energy and rapid cooling rates, resulting in heightened surface roughness (Ra: 12.39 µm) and reduced LAGBs (29%). These alterations weakened contact pressure tolerance during sliding, and facilitated additional corrosion pathways, accelerating intergranular corrosion and diminishing wear resistance. This study underscores the indispensable necessity for meticulous control of remelting parameters to achieve optimal performances, thereby imparting valuable insights for advancing additive manufacturing techniques.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
2. Densification, microstructure, tribological and electrochemical properties of pure Zn fabricated by laser powder bed fusion10.1016/j.jallcom.2023.170227 ↗
3. Control of grain structure, phases, and defects in additive manufacturing of high-performance metallic components10.1016/j.pmatsci.2023.101153 ↗
4. Effect of pretreatment process on microstructure and mechanical properties in Inconel 718 alloy10.1016/j.jallcom.2023.168707 ↗
5. Pore defects in laser powder bed fusion: formation mechanism, control method, and perspectives10.1016/j.jallcom.2023.169215 ↗
6. Laser powder bed fusion of GH3536 nickel-based superalloys: processing parameters, microstructure and mechanical properties10.1016/j.matchar.2023.113018 ↗
7. High power laser powder bed fusion of Inconel 718 alloy: effect of laser focus shift on formability, microstructure and mechanical properties10.1016/j.jmatprotec.2022.117824 ↗
8. Hot isostatic pressing of IN718 components manufactured by selective laser melting
9. Tribological behaviors of LDED Inconel 718 samples polished with a hybrid laser polishing technique10.1016/j.jmrt.2023.05.230 ↗
10. Tailoring microstructure of additively manufactured Ti6Al4V titanium alloy using hybrid additive manufacturing technology
11. Investigation of layer-by-layer laser remelting to improve surface quality, microstructure, and mechanical properties of laser powder bed fused AlSi10Mg alloy10.1016/j.matdes.2021.110092 ↗
12. Influence of a remelt scan strategy on the microstructure and fatigue behaviour of additively manufactured biomedical Ti65Ta efficiently assessed using small scale specimens10.1016/j.ijfatigue.2022.106944 ↗
13. Selective laser melting of Ti6Al4V: effect of laser re-melting10.1016/j.msea.2020.140558 ↗
14. Influence of a rescanning strategy with different laser powers on the microstructure and mechanical properties of Hastelloy X elaborated by powder bed fusion10.1016/j.msea.2020.140474 ↗
15. Investigation on microstructure and tribological performances of electrodeposited Ni-W-Y2O3 composite coatings10.1016/j.jallcom.2023.171397 ↗
16. Effect of Al content on microstructure and microhardness of Inconel 718 superalloy fabricated by laser additive manufacturing10.1016/j.jmrt.2021.12.127 ↗
17. Effect of heat treatment on the microstructure and elevated temperature tensile properties of Rene 41 alloy produced by laser powder bed fusion
18. Anisotropic tension-compression asymmetry in SLM 316L stainless steel10.1016/j.ijmecsci.2023.108139 ↗
19. Core-shell structure in situ reinforced aluminum matrix composites: microstructure, mechanical and tribological properties10.1016/j.jallcom.2022.163613 ↗
20. Corrosion behavior of wire arc additive manufactured Inconel 718 superalloy10.1016/j.jallcom.2020.154455 ↗
21. Effect of ytterbium oxide on the structure and corrosion resistance of micro-arc oxide coatings of Mg-Nd binary alloys in the natural seawater10.1016/j.corsci.2023.111332 ↗
22. On microstructure and corrosion behaviour of AlSi10Mg alloy with low surface roughness fabricated by direct metal laser sintering10.1016/j.corsci.2019.05.032 ↗
23. Enhancing mechanical properties and corrosion resistance of nickel-aluminum bronze via hot rolling process10.1016/j.jmst.2020.05.024 ↗
24. Anisotropic response in mechanical and corrosion properties of hastelloy X fabricated by selective laser melting10.1016/j.conbuildmat.2019.06.132 ↗
25. Effect of carbides on sensitivity of pitting corrosion in Inconel 718 alloy10.1108/ACMM-10-2018-2025 ↗
26. Improved corrosion resistance of laser melting deposited CoCrFeNi-series high-entropy alloys by Al addition10.1016/j.corsci.2023.111599 ↗
27. Corrosion mechanism of an equimolar AlCoCrFeNi high-entropy alloy additively manufactured by electron beam melting10.1038/s41529-020-00127-4 ↗
28. Defining the passive state10.1016/S0167-2738(96)00505-X ↗
29. In-situ formation of particle reinforced Aluminium matrix composites by laser powder bed fusion of Fe2O3/AlSi12 powder mixture using laser melting/remelting strategy10.1016/j.jmatprotec.2021.117357 ↗
30. Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing10.1016/j.jmatprotec.2014.06.005 ↗
31. Multiphase mesoscopic simulation of multiple and functionally gradient materials laser powder bed fusion additive manufacturing processes
32. Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling10.1016/j.jallcom.2016.01.250 ↗
33. A comprehensive comparison of the analytical and numerical prediction of the thermal history and solidification microstructure of Inconel 718 products made by laser powder-bed fusion10.1016/J.ENG.2017.05.023 ↗
34. Transient nucleation and microstructural design in flash-annealed bulk metallic glasses10.1016/j.actamat.2017.01.059 ↗
35. Texture control of 316l parts by modulation of the melt pool morphology in selective laser melting10.1016/j.jmatprotec.2018.08.049 ↗
36. Microstructure and tribological properties of titanium matrix nanocomposites through powder metallurgy using graphene oxide nanosheets enhanced copper powders and spark plasma sintering10.1016/j.jallcom.2021.159093 ↗
37. Grain boundary engineering during the laser powder bed fusion of TiC/316L stainless steel composites: new mechanism for forming TiC induced special grain boundaries10.1016/j.actamat.2021.117605 ↗
38. Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells10.1016/j.electacta.2018.04.188 ↗
39. Microstructure and corrosion resistance of fusion zone in Ti-6Al-4V alloy welded using pulsed- and continuous-wave lasers10.1016/j.corsci.2023.111269 ↗
40. Size dependent interface energy and its applications10.1016/j.surfrep.2008.07.001 ↗
41. New perspectives on the grain boundary misorientation angle dependent intergranular corrosion of polycrystalline nickel-based 625 alloy10.1016/j.corsci.2020.108718 ↗
42. A closer inspection of a grain boundary immune to intergranular corrosion in a sensitised Al-Mg alloy10.1016/j.corsci.2018.01.009 ↗
43. Correlating the five parameter grain boundary character distribution and the intergranular corrosion behaviour of a stainless steel using 3D orientation microscopy based on mechanical polishing serial sectioning10.1016/j.actamat.2018.06.044 ↗