journal article·2024-03

Effects of yttrium content on solidification, microstructure, and mechanical properties of laser powder bed fused IN718 superalloy

Thaviti Naidu Palleda, Hasina Tabassum Chowdhury, Santhosh Banoth, Hideyuki Murakami, Koji Kakehi

Publisher page

Abstract

The microstructural evolution and mechanical properties of IN718 superalloy with different yttrium (Y) contents were investigated. In this study, three alloys containing 0 wt%, 0.07 wt%, and 0.58 wt% of Y were fabricated by laser powder bed fusion (L-PBF). The experimental results showed that with a minor addition of Y content (0.07 wt%), the tensile ductility at 650 ºC increased from 10.3% to 20.3%, and the creep life increased from 203 h to 1545 h. The increased tensile ductility and creep life are attributable to the formation of fine MC carbides, which induce serrated grain boundaries, and to the strong affinity of Y for oxygen, resulting in the formation of Y 2O 3 to strengthen the grain boundaries. However, when the Y addition increased (0.58 wt%), the formation of a large Y-rich phase at the grain boundary reduced the tensile ductility and creep life.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Metal fabrication by additive manufacturing using laser and electron beam melting technologies10.1016/S1005-0302(12)60016-4 ↗
2. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
3. The effect of powder oxidation on defect formation in laser additive manufacturing10.1016/j.actamat.2018.12.027 ↗
4. Effect of yttrium addition on creep properties of a Ni-base superalloy built up by selective laser melting10.1016/j.scriptamat.2020.03.014 ↗
5. The creep behavior of additively manufactured Inconel 62510.1002/adem.201900543 ↗
6. High-temperature tensile and high cycle fatigue properties of inconel 625 alloy manufactured by laser powder bed fusion
7. The creep and fracture properties of additively manufactured inconel 625
8. P.N. Quested, Modelling of Marangoni effects in electron beam melting, 1998. http://rsta.royalsocietypublishing.org/.
9. Balling behavior of stainless steel and nickel powder during selective laser melting process10.1007/s00170-011-3566-1 ↗
10. The creep and fracture behavior of additively manufactured Inconel 625 and 718
11. Temperature and strain-rate dependence of the elevated temperature ductility of Inconel 718 prepared by selective laser melting10.1016/j.msea.2021.141814 ↗
12. High temperature mechanical integrity of selective laser melted alloy 718 evaluated by slow strain rate tests10.1016/j.ijplas.2021.102974 ↗
13. Effects of B AND Zr on the creep and fatigue crack growth behavior of a Ni-base superalloy10.1007/BF02644294 ↗
14. Effect of minor elements on hot workability of nickel-base superalloys10.1179/030716979803276110 ↗
15. Effect of Zr on solidification segregation behavior of K417G alloy and its anomalous effect during rapid cooling process10.1016/j.jallcom.2020.155243 ↗
16. Microstructural changes caused by yttrium addition to NbTi-modified centrifugally cast HP-type stainless steels10.1016/j.matchar.2006.04.007 ↗
17. Influence of yttrium on purification and carbide precipitation of superalloy K416910.1016/j.jmst.2021.01.049 ↗
18. Mechanisms of reactive element Y on the purification of K4169 superalloy during vacuum induction melting10.1007/s12613-018-1617-4 ↗
19. Manufacturing an ultra-low-sulfur CoCrFeMnNi high-entropy alloy by slagging through induction melting with ferroalloys feedstock10.1016/j.jallcom.2022.167080 ↗
20. Manufacturing of High Entropy Alloys10.1007/s11837-015-1540-3 ↗
21. Influence of Y on stress rupture property of a Ni-based superalloy10.1016/j.msea.2012.04.117 ↗
22. Role of yttrium in the microstructure and mechanical properties of a boron-modified nickel-based superalloy10.1016/j.scriptamat.2007.06.003 ↗
23. Influence of yttrium addition on high temperature oxidation resistance of single crystal superalloy10.1016/S1002-0721(12)60360-3 ↗
24. High-Temperature Oxidation Behavior and Oxide Scale Structure of Yttrium-Modified Ni–16Mo–7Cr–4Fe Superalloy at 1273 K10.1007/s11085-019-09914-0 ↗
25. Influence of yttrium addition on the microstructural evolution and mechanical properties of superalloy 71810.1016/j.msea.2020.139023 ↗
26. Comprehensive influence of Y on K417 superalloy: purification, interactions among the alloy elements and high temperature properties10.1016/j.msea.2019.04.011 ↗
27. Significant impact of yttrium microaddition on high temperature tensile properties of Inconel 713C superalloy10.1016/j.matlet.2018.03.106 ↗
28. Materials Science & Engineering A Effects of yttrium addition on microstructure and mechanical properties of Inconel 718 alloy produced by sub-rapid solidification10.1016/j.msea.2021.141726 ↗
29. The role of yttrium micro-alloying on microstructure evolution and high-temperature mechanical properties of additively manufactured Inconel 71810.1016/j.matdes.2022.111567 ↗
30. Comparative investigation of small punch creep resistance of Inconel 718 fabricated by selective laser melting10.1016/j.msea.2018.12.083 ↗
31. The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing10.1016/j.actamat.2018.10.032 ↗
32. Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing10.1016/j.scriptamat.2016.10.035 ↗
33. Creep anisotropy reduction and improvement via post-heat treatment in yttrium-added Hastelloy-X fabricated by laser powder bed fusion10.1007/s00170-023-11237-z ↗
34. Laser powder bed fused Inconel 718 in stress-relieved and solution heat-treated conditions10.1016/j.matchar.2021.111499 ↗
35. Heat treatment behaviour of IN718 superalloy fabricated by laser-powder bed fusion10.1016/j.matchar.2023.112788 ↗
36. Tailoring of the microstructure of laser powder bed fused inconel 718 using solution annealing and aging treatments10.3390/met11060921 ↗
37. Influence of Y on stress rupture property of a Ni-based superalloy10.1016/j.msea.2012.04.117 ↗
38. Effects of yttrium addition on microstructures and mechanical properties of CoCrNi medium entropy alloy
39. Evolution of Y2O3 dispersoids during laser powder bed fusion of oxide dispersion strengthened Ni-Cr-Al-Ti γ/γ’ superalloy
40. D. KANG, Effect of Yttrium Addition on Microstructure Evolution in Polycrystalline Inconel 713 Ni Based Superalloys, Tohoku University, 2018. https://ci.nii.ac.jp/naid/500001397813.bib (accessed December 24, 2023).
41. Effect of yttrium addition on creep properties of a Ni-base superalloy built up by selective laser melting10.1016/j.scriptamat.2020.03.014 ↗
42. Effect of Carbide Inoculants Additions in IN718 Fabricated by Selective Laser Melting Process
43. The effect of grain boundary serration on creep resistance in a wrought nickel-based superalloy10.1016/j.msea.2009.03.071 ↗
44. The effect of post-processes on the microstructure and creep properties of Alloy718 built up by selective laser melting10.3390/ma11060996 ↗