Corrosion behavior of Ta and TiN double-layer-coated SUS316L for PEMFC bipolar plates using plasma-enhanced atomic layer deposition and magnetron sputtering
Source abstract
Abstract
In this study, the corrosion behavior of Ta and TiN double-layered-coated SUS316L is investigated for proton-exchange membrane fuel cells (PEMFCs) bipolar plates. The surface of SUS316L is modified by depositing 4.5 µm of Ta and 200 or 400 nm of TiN using magnetron sputtering and plasma-enhanced atomic layer deposition, respectively. The experimental results reveal that this coating significantly enhances the corrosion resistance and reduces the interfacial contact resistance of the bipolar plate. Under electrochemical conditions that are 500 times more acidic than those specified by the Department of Energy (DOE), the coated SUS316L achieves a corrosion current density of only 1.0 µA/cm 2 at 0.6 V SCE . The corrosion current density reduces up to more than two orders of magnitude, and the interfacial contact resistance with carbon paper is below 10 mΩcm 2 at compression forces below 140 N/cm 2, thus meeting the DOE 2025 target value for both corrosion current density and interfacial contact resistance. Our findings suggest the potential of Ta and TiN double-layered-coated SUS316L as durable bipolar plate materials for PEMFCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (92)
Show source-provided references
1. 03/01745 Introduction of PEM fuel-cell vehicles in the transportation sector of the United Arab Emirates10.1016/S0140-6701(03)91861-3 ↗
2. A comprehensive review on hybrid power system for PEMFC-HEV: Issues and strategies10.1016/j.enconman.2018.06.065 ↗
3. Performance evaluation on thermodynamics-economy-environment of PEMFC vehicle power system under dynamic condition10.1016/j.enconman.2022.116082 ↗
4. Bipolar plates for PEM fuel cells: A review10.1016/j.ijhydene.2005.04.016 ↗
5. An investigation into TiN-coated 316L stainless steel as a bipolar plate material for PEM fuel cells10.1016/j.jpowsour.2006.12.034 ↗
6. Reviewing metallic PEMFC bipolar plates10.1002/fuce.200900187 ↗
7. B.D. James, J.M. Huya-Kouadio, C. Houchins, 2017, DOE Hydrogen and Fuel Cells Program Review Fuel Cell Systems Analysis, (2017).
8. K. Society, P. Engineering, Korean Society for Precision Engineering, 2018: 8446.
9. Research on water and heat management in the cold start process of proton exchange membrane fuel cell with expanded graphite bipolar plate10.1016/j.enconman.2021.113942 ↗
10. Highly Conductive and Strong Graphite-Phenolic Resin Composite for Bipolar Plate Applications10.1021/acs.energyfuels.7b02678 ↗
11. High performance polymeric bipolar plate based on polypropylene/graphite/graphene/nano-carbon black composites for PEM fuel cells10.1016/j.renene.2016.07.062 ↗
12. Investigation of hydrophobic and anti-corrosive behavior of Cr-DLC film on stainless steel bipolar plate10.1016/j.diamond.2022.109352 ↗
13. Effect of plasma electrolytic nitriding on the corrosion behavior and interfacial contact resistance of titanium in the cathode environment of proton-exchange membrane fuel cells10.1016/j.jpowsour.2019.02.043 ↗
14. Current understanding of chemical degradation mechanisms of perfluorosulfonic acid membranes and their mitigation strategies: A review10.1039/C7SE00038C ↗
15. An investigation of coated aluminium bipolar plates for PEMFC10.1016/j.apenergy.2012.06.045 ↗
16. Assessment of the durability of low-cost Al bipolar plates for High Temperature PEM fuel cells10.1016/j.ijhydene.2018.07.070 ↗
17. Corrosion behavior of tantalum coatings on AISI 316L stainless steel substrate for bipolar plates of PEM fuel cells10.1016/j.ijhydene.2019.12.157 ↗
18. Review of materials and processing methods used in the production of bipolar plates for fuel cells10.1179/174328006X102556 ↗
19. B.D. James, J.M. Moton, W.G. Colella, Mass Production Cost Estimation of Direct H2 PEM Fuel Cell Systems for Transportation Applications: 2018 Update, 2018.
20. Degradation of SS316L bipolar plates in simulated fuel cell environment: Corrosion rate, barrier film formation kinetics and contact resistance10.1016/j.jpowsour.2014.02.053 ↗
21. Stainless steel bipolar plates for proton exchange membrane fuel cells: Materials, flow channel design and forming processes10.1016/j.jpowsour.2020.227783 ↗
22. Recent Development Trends in Materials for Bipolar Plates of Proton Exchange Membrane Fuel Cells (PEMFCs) and Kobe Steel’s Activities, R D Res
23. Bipolar Plate Workshop Summary Report, Fuel Cell Technol. Off. U.S. Dep
24. Review on current research of materials, fabrication and application for bipolar plate in proton exchange membrane fuel cell10.1016/j.ijhydene.2019.07.231 ↗
25. Improving performance in PEMFC by applying different coatings to metallic bipolar plates10.1016/j.matchemphys.2019.121911 ↗
26. Coated 316L stainless steel with CrxN film as bipolar plate for PEMFC prepared by pulsed bias arc ion plating10.1016/j.jpowsour.2007.10.038 ↗
27. Corrosion Investigation of Chromium Nitride and Chromium Carbide Coatings for PEM Fuel Cell Bipolar Plates in Simulated Cathode Condition10.1002/fuce.201600005 ↗
28. Anti-corrosion performance of the conductive bilayer CrC/CrN coated 304SS bipolar plate in acidic environment10.1016/j.corsci.2022.110495 ↗
29. Ultrathin effective TiN protective films prepared by plasma-enhanced atomic layer deposition for high performance metallic bipolar plates of polymer electrolyte membrane fuel cells10.1016/j.apsusc.2020.146215 ↗
30. Ex situ evaluation of nanometer range gold coating on stainless steel substrate for automotive polymer electrolyte membrane fuel cell bipolar plate10.1016/j.jpowsour.2009.09.022 ↗
31. Solution acidity and temperature induced anodic dissolution and degradation of through-plane electrical conductivity of Au/TiN coated metal bipolar plates used in PEMFC10.1016/j.energy.2022.124453 ↗
32. Surface microstructure and performance of TiN monolayer film on titanium bipolar plate for PEMFC10.1016/j.ijhydene.2021.07.021 ↗
33. Investigation of incorporating oxygen into TiN coating to resist high potential effects on PEMFC bipolar plates in vehicle applications10.1016/j.ijhydene.2020.06.059 ↗
34. Corrosion resistant and conductive TiN/TiAlN multilayer coating on 316L SS: a promising metallic bipolar plate for proton exchange membrane fuel cell10.1007/s10853-020-05682-4 ↗
35. Tantalum nitride coated AISI 316L as bipolar plate for polymer electrolyte membrane fuel cell10.1016/j.ijhydene.2011.09.060 ↗
36. E. McCafferty, Thermodynamics of Corrosion: Pourbaix Diagrams. In: Introduction to Corrosion Science., Springer, New York, NY, 2010: 328. http://link.springer.com/10.1007/b97510.10.1007/978-1-4419-0455-3_6 ↗
37. P. Ren, P. Pei, Y. Li, Z. Wu, D. Chen, S. Huang, Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions, 80, 2020. https://doi.org/10.1016/j.pecs.2020.100859.10.1016/j.pecs.2020.100859 ↗
38. H. Tang, Z. Qi, M. Ramani, J.F. Elter, PEM fuel cell cathode carbon corrosion due to the formation of air / fuel boundary at the anode, 158, 2006: 1306–1312. https://doi.org/10.1016/j.jpowsour.2005.10.059.10.1016/j.jpowsour.2005.10.059 ↗
39. Effects of Ag Current Collecting Layer Fabricated by Sputter for 3D-Printed Polymer Bipolar Plate of Ultra-Light Polymer Electrolyte Membrane Fuel Cells
40. Effect of substrate bias voltage on corrosion of TiN/Ti multilayers deposited by magnetron sputtering10.1016/j.apsusc.2007.02.203 ↗
41. Corrosion behaviour of TiN and CrN coatings produced by magnetron sputtering process on aluminium alloy10.20964/2019.01.81 ↗
42. Atomic layer deposition and other thin film deposition techniques: From principles to film properties10.1016/j.jmrt.2022.10.064 ↗
43. Effect of plasma power on the structural properties of tin oxide prepared by plasma-enhanced atomic layer deposition10.1016/j.ceramint.2020.11.232 ↗
44. Protective coatings on stainless steel bipolar plates for proton exchange membrane (PEM) electrolysers10.1016/j.jpowsour.2015.12.071 ↗
45. Issues regarding bipolar plate-gas diffusion layer interfacial contact resistance determination10.1016/j.jpowsour.2022.231275 ↗
46. A. Puichaud, C. Flament, A. Chniouel, F. Lomello, E. Rouesne, (Microstructure_and_mechanical_properties_relations.pdf, 23 2019).10.1051/epjn/2019051 ↗
47. Anticorrosion properties of Ta-coated 316L stainless steel as bipolar plate material in proton exchange membrane fuel cells10.1016/j.jpowsour.2009.02.020 ↗
48. Preparation and performance of nanometric Ti/TiN multi-layer physical vapor deposited coating on 316L stainless steel as bipolar plate for proton exchange membrane fuel cells10.1016/j.jpowsour.2019.226818 ↗
49. Effect of oxidative surface treatments on charge storage at titanium nitride surfaces for supercapacitor applications10.1039/C6TA08308K ↗
50. Titanium and titanium nitride thin films grown by dc reactive magnetron sputtering Physical Vapor Deposition in a continuous mode on stainless steel wires: Chemical, morphological and structural investigations10.1016/j.surfcoat.2017.05.089 ↗
51. Effect of annealing temperature on physical properties of nanostructured TiN/3DG composite10.1016/j.matdes.2015.10.152 ↗
52. Corrosion resistance and conductivity of NbN-coated 316L stainless steel bipolar plates for proton exchange membrane fuel cells10.1016/j.corsci.2021.110042 ↗
53. Process and challenges of stainless steel based bipolar plates for proton exchange membrane fuel cells10.1007/s12613-022-2485-5 ↗
54. Comparison of electrochemical and surface characterisation methods for investigation of corrosion of bipolar plate materials in molten carbonate fuel cell Part II. Surface analysis10.1016/S0010-938X(98)00201-7 ↗
55. Experimental analysis of performance degradation of 3-cell PEMFC stack under dynamic load cycle10.1016/j.ijhydene.2020.02.215 ↗
56. A review of passivity breakdown on metal surfaces: influence of chloride- and sulfide-ion concentrations, temperature, and pH10.1007/s42247-021-00194-6 ↗
57. Revised Pourbaix diagrams for nickel at 25-300°c10.1016/S0010-938X(97)00002-4 ↗
58. B. Beverskog, Revised Diagrams for Iron At 25–300 ° C, Science (80–.). 38, 1996: 2121–2135. http://www.sciencedirect.com/science/article/pii/S0010938×96000674.10.1016/S0010-938X(96)00067-4 ↗
59. Revised pourbaix diagrams for chromium at 25-300°C10.1016/S0010-938X(97)89244-X ↗
60. TaNX coatings deposited by HPPMS on SS316L bipolar plates for polymer electrolyte membrane fuel cells: Correlation between corrosion current, contact resistance and barrier oxide film formation10.1016/j.ijhydene.2017.01.070 ↗
61. Ultrathin effective TiN protective films prepared by plasma-enhanced atomic layer deposition for high performance metallic bipolar plates of polymer electrolyte membrane fuel cells10.1016/j.apsusc.2020.146215 ↗
62. Effects of pH value and temperature on the corrosion behavior of a Ta2N nanoceramic coating in simulated polymer electrolyte membrane fuel cell environment10.1016/j.ceramint.2016.07.175 ↗
63. Assessing potential profiles in water electrolysers to minimise titanium use10.1039/D2EE00876A ↗
64. Low-cost and durable bipolar plates for proton exchange membrane electrolyzers10.1038/srep44035 ↗
65. Polylaminate TaN/Ta coating modified ferritic stainless steel bipolar plate for high temperature proton exchange membrane fuel cell10.1016/j.jpowsour.2018.07.122 ↗
66. Corrosion behavior of a ZrCN coated Ti alloy with potential application as a bipolar plate for proton exchange membrane fuel cell10.1016/j.jallcom.2015.12.197 ↗
67. Influence of CrN-coating thickness on the corrosion resistance behaviour of aluminium-based bipolar plates10.1016/j.jpowsour.2010.11.069 ↗
68. An investigation into polypyrrole-coated 316L stainless steel as a bipolar plate material for PEM fuel cells10.1016/j.jpowsour.2006.09.048 ↗
69. Enhancing through-plane electrical conductivity by introducing Au microdots onto TiN coated metal bipolar plates of PEMFCs10.1016/j.ijhydene.2020.07.270 ↗
70. Effects of flow direction on dynamic response and stability of nonhumidification PEM fuel cell10.1016/j.energy.2019.07.073 ↗
71. The recent progress and future of oxygen reduction reaction catalysis: A review10.1016/j.rser.2016.09.135 ↗
72. Performance investigation on a coaxial-nozzle ejector for PEMFC hydrogen recirculation system10.1016/j.ijhydene.2021.09.048 ↗
73. Corrosion of metallic bipolar plates accelerated by operating conditions in a simulated PEM fuel cell cathode environment10.1016/j.renene.2022.05.153 ↗
74. Electrochemical behaviour and surface conductivity of niobium carbide-modified austenitic stainless steel bipolar plate10.1016/j.jpowsour.2013.08.025 ↗
75. Concepts for preventing metal dissolution from stainless-steel bipolar plates in PEM fuel cells10.1016/j.enconman.2021.115153 ↗
76. Effects of O2 and H2 on the corrosion of SS316L metallic bipolar plate materials in simulated anode and cathode environments of PEM fuel cells10.1016/j.electacta.2007.05.001 ↗
77. Influence of SAP on the chloride penetration and corrosion behavior of steel bar in concrete10.1016/j.corsci.2020.108714 ↗
78. An investigation of the electrochemical properties of PVD TiN-coated SS410 in simulated PEM fuel cell environments10.1016/j.ijhydene.2007.02.006 ↗
79. Effect of nitrides on the corrosion behaviour of 316L SS bipolar plates for Proton Exchange Membrane Fuel Cell (PEMFC)10.1016/j.ijhydene.2014.12.108 ↗
80. A review of modified metal bipolar plates for proton exchange membrane fuel cells10.1016/j.ijhydene.2020.12.074 ↗
81. Bilayer CrN/Cr coating-modified 316L stainless steel bipolar plates for high temperature polymer electrolyte fuel cells10.1016/j.jpowsour.2019.226718 ↗
82. Formation of a protective TiN layer by liquid phase plasma electrolytic nitridation on Ti–6Al–4V bipolar plates for PEMFC10.1016/j.ijhydene.2020.02.152 ↗
83. Reduced contact resistance of PEM fuel cell’s bipolar plates via surface texturing10.1016/j.jpowsour.2006.11.033 ↗
84. Bipolar plate materials for PEMFCs: A conductivity and stability study10.1016/j.jpowsour.2008.01.038 ↗
85. ZrC Coating Modified Ti Bipolar Plate for Proton Exchange Membrane Fuel Cell10.1002/fuce.201900241 ↗
86. Fabrication of titanium bipolar plates by rubber forming process and evaluation characteristics of TiN coated titanium bipolar plates10.1002/fuce.201400091 ↗
87. Titanium bipolar plates augmented by nanocrystalline TiZrHfMoW coatings for application in proton exchange membrane fuel cells10.1016/j.apsusc.2022.153200 ↗
88. Corrosion-resistant and interfacial conductive AlTiVCrMo high-entropy alloy and (AlTiVCrMo)Nx high-entropy ceramics coatings for surface modification of bipolar plates in proton exchange membrane fuel cells10.1016/j.jpowsour.2022.231217 ↗
89. Corrosion and interfacial contact resistance of 316L stainless steel coated with magnetron sputtered ZrN and TiN in the simulated cathodic environment of a proton-exchange membrane fuel cell10.1016/j.surfcoat.2019.02.027 ↗
90. Corrosion and interfacial contact resistance of nanocrystalline β-Nb2N coating on 430 FSS bipolar plates in the simulated PEMFC anode environment10.1016/j.ijhydene.2021.06.207 ↗
91. Preparation of corrosion-resistant and conductive trivalent Cr-C coatings on 304 stainless steel for use as bipolar plates in proton exchange membrane fuel cells by electrodeposition10.1016/j.jpowsour.2015.05.105 ↗
92. Improving the electrical performance of a carbon fiber reinforced polymer bipolar plate using a resin squeeze-out preprocess10.1016/j.coco.2022.101156 ↗