Microstructural, corrosion and mechanical properties of a WE43 alloy: conventional extrusion versus SPD
Source abstract
Abstract
A hexagonal close-packed-structure WE43 alloy was extruded without any preheating of the initial billet using extrusion with an oscillating die to improve the corrosion and mechanical properties. The WE43 alloy was extruded at high ratios of R 1 5:1, R 2 7:1 and R 3 10:1. Electron back-scatter diffraction and transmission electron microscopy were used to determine the microstructural properties of the alloys. The influence of the extrusion method and the extrusion ratios on the corrosion and mechanical properties were investigated. Electrochemical tests were performed, and the corrosion damage was inspected. Tensile tests were made using micro specimens. When compared to conventional extrusion, the microstructural changes obtained with the KoBo method at R 5:1 increased the corrosion resistance, which was not only due to the grain refinement, but also due to the intensity of the texture. A decline in the corrosion resistance of the alloys deformed at higher extrusion ratios was observed. This was a result of the massive plastic strain imposed by the KoBo die. The room-temperature mechanical properties of the KoBo-extruded alloys were improved. However, at higher temperatures the mechanical properties decreased due to the solutioning of tiny triple precipitates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. In situ differential scanning calorimetry analysis of dissolution and precipitation kinetics in Mg–Y–RE alloy WE4310.1016/j.jma.2019.01.002 ↗
2. Effect of strain path on the evolution of microstructure, texture and tensile properties of WE43 alloy10.1016/j.msea.2018.01.018 ↗
3. Comparative in vitro study on binary Mg-RE (Sc, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) alloy systems10.1016/j.actbio.2019.11.013 ↗
4. Microstructure, mechanical, corrosion, and ignition properties of WE43 alloy prepared by different processes10.3390/met11050728 ↗
5. Effect of microstructure on corrosion behavior of we43 magnesium alloy in as cast and heat-treated conditions10.3390/met10111552 ↗
6. Different role of second phase in the micro-galvanic corrosion of WE43 Mg alloy in NaCl and Na2SO4 solution
7. The relation between microstructure and corrosion behavior of Mg-Y-RE-Zr alloys10.1016/j.jallcom.2006.05.075 ↗
8. Applying multi-pass friction stir processing to refine the microstructure and enhance the strength, ductility and corrosion resistance of WE43 magnesium alloy10.1016/j.jmrt.2021.03.021 ↗
9. Towards refining microstructures of biodegradable magnesium alloy WE43 by spark plasma sintering10.1016/j.actbio.2019.06.045 ↗
10. Comparison of corrosion performance of extruded and forged WE43 Mg alloy
11. Automated identification of deformation twin systems in Mg WE43 from SEM DIC10.1016/j.matchar.2020.110628 ↗
12. Strength, corrosion resistance, and biocompatibility of ultrafine-grained Mg alloys after different modes of severe plastic deformation10.1088/1757-899X/194/1/012004 ↗
13. Effect of pre-deformation on microstructure and mechanical properties of WE43 magnesium alloy10.1016/j.msea.2017.02.082 ↗
14. Microstructure and superior mechanical properties of a multi-axially forged WE magnesium alloy10.1016/j.jallcom.2016.09.198 ↗
15. A study on the combined effect of forging and aging in Mg-Y-RE alloy10.1016/j.msea.2011.08.065 ↗
16. Deformation and fracture behavior of Mg alloy, WE43, after various aging heat treatments10.1016/j.msea.2017.08.067 ↗
17. The Influence of the Deformation Method on the Microstructure and Properties of Magnesium Alloy Mg-Y-RE-Zr10.3390/ma15062017 ↗
18. Corrosion behavior of fine-grained Mg-7.5Li-3Al-1Zn fabricated by extrusion with a forward-backward rotating die (KoBo)
19. The effect of extrusion ratio on the corrosion resistance of ultrafine-grained Mg-4Li-3Al-Zn alloy deformed using extrusion with a forward-backward oscillating die10.1007/s11665-022-06895-1 ↗
20. Evolution of microstructure dependent corrosion properties of ultrafine AZ31 under conditions of extrusion with a forward backward oscillating die10.1016/j.jmrt.2022.04.131 ↗
21. Elementary model of severe plastic deformation by KoBo process10.1063/1.4861870 ↗
22. Measurement of mechanical properties in a 316L stainless steel welded joint10.1016/j.ijpvp.2008.11.002 ↗
23. EN ISO, Metallic materials - Tensile testing - Part 1: Method of test at room temperature, 2020. http://sklep.pkn.pl/pn-en-iso-6892–1-2016–09e.html.
24. Exceptional mechanical properties of ultra-fine grain Mg-4Y–3RE alloy processed by ECAP10.1016/j.msea.2017.09.106 ↗
25. On the unexpected formation of rare earth hydrides in magnesium-rare earth casting alloys10.1016/j.scriptamat.2014.01.007 ↗
26. Precipitation in magnesium alloy WE54 during isothermal ageing at 250°C10.1016/S1359-6462(99)00084-6 ↗
27. Characterisation of strengthening precipitate phases in a Mg-Y-Nd alloy10.1016/S1359-6454(00)00013-6 ↗
28. Effect of heat treatment on microstructures and mechanical properties of a cast Mg-Y-Nd-Zr alloy10.1016/j.msea.2016.05.014 ↗
29. Semi-solid state mixing of Mg-Zn-RE alloys—microstructure and mechanical properties10.1016/j.jmatprotec.2018.09.012 ↗
30. Evolution of microstructure and mechanical properties of Mg-3.0Zn-0.2Ca-0.5Y alloy by extrusion at various temperatures10.1016/j.jmatprotec.2015.10.021 ↗
31. Improved surface corrosion resistance of WE43 magnesium alloy by dual titanium and oxygen ion implantation10.1016/j.tsf.2012.05.046 ↗
32. Electrochemical characteristics of calcium-phosphatized AZ31 magnesium alloy in 0.9% NaCl solution10.1007/s10856-014-5161-0 ↗
33. Corrosion of ultra-high-purity Mg in 3.5% NaCl solution saturated with Mg(OH)210.1016/j.corsci.2013.05.018 ↗
34. Electrochemical corrosion behavior of biodegradable Mg-Y-RE and Mg-Zn-Zr alloys in Ringer’s solution and simulated body fluid10.1016/j.corsci.2014.11.015 ↗
35. Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg-X alloys: X=Mn, Sn, Ca, Zn, Al, Zr, Si, Sr10.1016/j.corsci.2013.06.030 ↗
36. Corrosion characterization of Mg–8Li alloy in NaCl solution10.1016/j.corsci.2009.03.011 ↗
37. Bioabsorbable WE43 Mg alloy wires modified by continuous plasma-electrolytic oxidation for implant applications. Part I: Processing, microstructure and mechanical properties10.1016/j.bioadv.2023.213314 ↗
38. Texture effect on corrosion behavior of AZ31 Mg alloy in simulated physiological environment10.1016/j.matlet.2011.11.032 ↗
39. Influence of texture on corrosion rate of AZ31 Mg alloy in 3.5wt% NaCl10.1016/j.matdes.2011.04.031 ↗
40. Influence of crystallographic texture and grain size on the corrosion behaviour of as-extruded Mg alloy AZ31 sheets10.1016/j.corsci.2017.08.004 ↗
41. Optimising the torsional properties and corrosion resistance of biodegradable WE43 Mg alloy by ECAP and subsequent ageing10.1080/10667857.2019.1688539 ↗
42. Effect of hybrid reinforcement and number of passes on microstructure, mechanical and corrosion behavior of WE43 Mg alloy based metal matrix composite10.1016/j.jmapro.2023.01.070 ↗
43. Corrosion behavior of severely plastically deformed Mg and Mg alloys10.1016/j.jma.2022.09.007 ↗
44. Effect of extrusion ratio on mechanical and corrosion properties of AZ31B alloys prepared by a solid recycling process10.1016/j.matdes.2011.01.012 ↗
45. Room temperature corrosion properties of AZ31 magnesium alloy processed by extrusion and equal channel angular pressing10.1007/s10853-013-7173-4 ↗
46. Corrosion of hot extrusion AZ91 magnesium alloy: I-relation between the microstructure and corrosion behavior10.1016/j.corsci.2011.02.015 ↗
47. Improving corrosion resistance of additively manufactured WE43 magnesium alloy by high temperature oxidation for biodegradable applications
48. Corrosion resistance of WE43 Mg alloy in sodium chloride solution10.1016/j.matchemphys.2021.124930 ↗
49. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗
50. Structural examination of aging precipitation in a Mg-Y-Nd alloy at different temperatures10.1016/j.matchar.2011.03.007 ↗