Coercivity enhancement of NdCeFeB magnet by two-step grain boundary diffusion with Pr70Cu10Al15Ga5 and DyH
Source abstract
Abstract
Nd-Ce-Fe-B sintered magnets with Ce-substitution amounts of 30 wt% were treated by one- and two-step grain boundary diffusion processes, in which DyH x and low-melting-point Pr 70Cu 10Al 15Ga 5 (at%) alloys were designed as the diffusion sources and diffused into the magnets according to the different steps and orders. Results showed that the increase of coercivity was only 2.7 kOe when introducing heavy rare-earth Dy by the one-step diffusion of DyH x , reflecting the difficulty of conventional diffusion modification on high Ce content magnets. Note that by the two-step grain boundary diffusion (no matter which diffusion source was diffused preferentially in the first step), the coercivities were significantly enhanced over 18.5 kOe from the original 13.64 kOe, with the obvious improvements of thermal stability. Microstructures and compositions analyses revealed that the grain boundaries were greatly optimized after the diffusion of Pr 70Cu 10Al 15Ga 5, supporting favorable diffusion channels for the introduction of Dy in the subsequent second step. By contrast when introducing Dy first and then diffusing the Pr 70Cu 10Al 15Ga 5 second, the elements in the low-melting-point alloys could drive the superficial Dy to migrate into the deep interior of the magnets. Thus, both the two types of two-step grain boundary diffusions were conductive to improving the utilization of heavy rare-earth Dy in high Ce content magnets. Besides, dynamic domain evolution analyses demonstrated the positive effect of diffusion on anti-demagnetization. This work provided a foundation for the development of high Ce content magnets with high performances.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Rare-earth and actinide compounds · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Temperature-dependent Dy diffusion processes in Nd-Fe-B permanent magnets10.1016/j.actamat.2014.09.039 ↗
2. High-coercivity Nd-Fe-B magnets obtained with the electrophoretic deposition of submicron TbF3 followed by the grain-boundary diffusion process10.1016/j.actamat.2016.06.003 ↗
3. Understanding the role of element grain boundary diffusion mechanism in Nd-Fe-B magnets
4. Significant progress of grain boundary diffusion process for cost-effective rare earth permanent magnets: a review10.1016/j.matdes.2021.110004 ↗
5. Whole process metallurgical behavior of the high-abundance rare-earth elements LRE (La, Ce and Y) and the magnetic performance of Nd0.75LRE0.25-Fe-B sintered magnets10.1016/j.actamat.2018.05.046 ↗
6. Attaining high magnetic performance in as-sintered multi-main-phase Nd-La-Ce-Fe-B magnets: toward skipping the post-sinter annealing treatment10.1016/j.actamat.2019.03.005 ↗
7. Grain boundary engineering towards high-figure-of-merit Nd-Ce-Fe-B sintered magnets: synergetic effects of (Nd, Pr)Hx and Cu co-dopants10.1016/j.actamat.2020.116529 ↗
8. Grain boundary modification of multi-main-phase Nd0.7(La, Ce)0.3-Fe-B magnet towards 2 T coercivity10.1016/j.jallcom.2022.165263 ↗
9. Correlated microstructure and magnetic properties of Ce-substituted sintered Nd-Fe-B magnets: role of various phases at triple junctions and grain boundaries10.1016/j.actamat.2023.119407 ↗
10. Effects of REFe2 on microstructure and magnetic properties of Nd-Ce-Fe-B sintered magnets10.1016/j.actamat.2017.02.002 ↗
11. A reliable route for relieving the constraints of multi-main-phase Nd-La-Ce-Fe-B sintered magnets at high La-Ce substitution: (Pr, Nd)Hx grain boundary diffusion10.1016/j.scriptamat.2020.04.047 ↗
12. The technology and mechanism of coercivity promotion of Ce-rich dual-main-phase sintered magnets10.1016/j.jmmm.2019.165414 ↗
13. Coercivity and corrosion resistance enhancement of multi-main-phase Nd-Ce-Fe-B sintered magnets by the grain boundary diffusion process using Pr81.5Ga19.5 and Pr81.5Ga14.5Cu5 alloys10.1016/j.jmmm.2020.166639 ↗
14. Merits of Pr80Ga20 grain boundary diffusion process towards high coercivity-remanence synergy of Nd-La-Ce-Fe-B sintered magnet10.1016/j.actamat.2022.117873 ↗
15. Coercivity enhancement of a Ce-based permanent magnet by grain boundary diffusion with Re70Cu30 (Re: Nd/Dy) eutectic alloys10.1016/j.jallcom.2019.152965 ↗
16. Coercivity enhancement of sintered Ce-substituted Nd-Fe-B magnets by grain boundary diffusion process of Tb10.1016/j.jmmm.2020.167274 ↗
17. Effect of Ce content on the magnetic properties and microstructure of sintered Nd-Ce-Fe-B magnets after Pr70Cu30 alloy diffusion
18. Effect of inhibiting CeFe2 on grain boundary diffusion of Ce/La-Ce containing Nd-Fe-B magnets10.1016/j.matlet.2019.127017 ↗
19. Effect of oxygen content of Nd-Fe-B sintered magnet on grain boundary diffusion process of DyH2 dip-coating10.1063/1.4936172 ↗
20. Grain boundary restructuring of multi-main-phase Nd-Ce-Fe-B sintered magnets with Nd hydrides10.1016/j.actamat.2017.09.045 ↗
21. Effect of intergranular phase proportion in sintered Nd-Fe-B magnets on subsequent grain boundary diffusion using Tb-Cu alloy10.1016/j.jallcom.2022.167562 ↗
22. Temperature dependence of magnetization reversal mechanism in misch-metal substituted Nd-Fe-B magnets sintered by dual alloy method10.1016/j.actamat.2023.118710 ↗
23. Effects of (Nd, Pr)-Hx addition on the coercivity of Nd-Ce-Y-Fe-B sintered magnet10.1016/j.jallcom.2018.09.084 ↗
24. Substantial coercivity enhancement in Dy-free Nd-Fe-B sintered magnet by Dy grain boundary diffusion10.1016/j.actamat.2023.118774 ↗
25. Improved coercivity and squareness in bulk hot-deformed Nd-Fe-B magnets by two-step eutectic grain boundary diffusion process10.1016/j.actamat.2020.11.021 ↗
26. Improvement of coercivity and its thermal stability of hot-deformed Nd-Fe-B magnets processed by Tb70Cu30 doping and subsequent Nd85Cu15 diffusion10.1016/j.actamat.2021.117296 ↗
27. High coercivity Nd-Fe-B magnet with low Tb concentration by combined diffusion10.1016/j.jmmm.2020.167701 ↗
28. Microstructure optimization and coercivity enhancement of Nd-Fe-B magnet by double-step diffusion with Pr60Cu20Al20 alloy and Tb metal10.1016/j.jmmm.2022.169743 ↗
29. Formation mechanism of Tb-rich shell in grain boundary diffusion processed Nd-Fe-B sintered magnets10.1016/j.scriptamat.2019.12.002 ↗
30. Temperature dependences of interface reactions and Tb diffusion behavior of Pr-Tb-Cu-Al alloys/Nd-Fe-B magnet10.1016/j.scriptamat.2020.09.020 ↗
31. Magnetic performance and microstructure of NdFeB sintered magnet by diffusing Tb10Pr90-x(Cu,Al,Ga)x alloys10.1016/j.jallcom.2022.167888 ↗
32. Formation of anti-shell/core structure of heavy rare earth elements (Tb, Dy) in sintered Nd-Fe-B magnet after grain boundary diffusion process10.1016/j.scriptamat.2018.12.034 ↗