Effect of cooling rate on the phase transformation and post strength of Ti-6Al-4V under hot forming conditions: Experiments and modelling
Source abstract
Abstract
A systematic experimental and numerical study of the cooling rate effects on the post-formed strength and microstructure evolutions of a dual phase Ti-6Al-4V alloy under hot forming conditions was performed in this study. A series of cooling treatment tests were designed to achieve typical cooling scenarios in current hot forming processes, i.e. air cooling, water quenching and die quenching. The post-treated mechanical properties and phase volume fractions were characterized and quantified. The results show that higher temperatures and higher cooling rate would facilitate the β phase transformation and martensite transformation of α ′ phases, leading to the higher yield strength in the formed part. Based on the macro- and micro- properties relations and observed data, a unified model for the hot forming and cooling of Ti-6Al-4V was proposed and calibrated, enabling the accurate prediction of both the macro-strength and microstructures under different cooling conditions of the material. The proposed model was further implemented into FE simulation for practical forming process simulations. A typical hot gas forming process of a rectangular cross-sectioned titanium alloy hollow tubular part was investigated. Experiments of hot gas forming with different cooling conditions, i.e. forming temperatures and cooling rates, were carried out and used to validate the established material model and simulation model. Good prediction accuracy was obtained under all the tested conditions, with the maximum prediction errors of 5.55 % for macro-strength and of 9.79 % for average grain size. The results and the model developed in this paper provides an effective way to facilitate the process designs and optimization for hot forming titanium alloy parts in various applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. K. Wang, L. Wang, K. Zheng, Z. He, D.J. Politis, G. Liu, S. Yuan, High-efficiency forming processes for complex thin-walled titanium alloys components: state-of-the-art and perspectives, 2, 2020.10.1088/2631-7990/ab949b ↗
2. Formability and microstructure evolution mechanisms of Ti6Al4V alloy during a novel hot stamping process10.1016/j.msea.2018.02.038 ↗
3. Characterisation of the interfacial heat transfer coefficient in hot stamping of titanium alloys10.1016/j.icheatmasstransfer.2020.104535 ↗
4. Enhanced formability and forming efficiency for two-phase titanium alloys by Fast light Alloys Stamping Technology (FAST)10.1016/j.matdes.2020.108948 ↗
5. Hot stamping of titanium alloy sheets using partial contact heating10.1016/j.promfg.2018.07.375 ↗
6. W.C. Dykstra, G.D. Pfaffmann, X. Wu, Method of forming a tubular blank into a structural component and die therefor, 2002.
7. Fundamentals, processes and equipment for hot medium pressure forming of light material tubular components
8. A. Paul, M. Werner, R. Trân, D. Landgrebe, Hot metal gas forming of titanium grade 2 bent tubes, in: AIP Conference Proceedings, 2017: p. 50009.10.1063/1.5008054 ↗
9. Formability determination of titanium alloy tube for high pressure pneumatic forming at elevated temperature10.1016/j.proeng.2014.10.315 ↗
10. Effect of feeding length on deforming behavior of Ti-3Al-2.5 V tubular components prepared by tube gas forming at elevated temperature10.1007/s00170-015-7271-3 ↗
11. Microstructure analysis on enhancing mechanical properties at 750 °C and room temperature of Ti-22Al-24Nb-0.5Mo alloy tubes fabricated by hot gas forming10.1016/j.jallcom.2019.03.040 ↗
12. The effect of microstructure on the mechanical properties of TC4-DT titanium alloys10.1016/j.msea.2012.11.033 ↗
13. Quantitatively analyzing strength contribution vs grain boundary scale relation in pure titanium subjected to severe plastic deformation10.1007/s11661-016-3391-0 ↗
14. Mesoscale modeling of dynamic recrystallization behavior, grain size evolution, dislocation density, processing map characteristic, and room temperature strength of Ti-6Al-4V alloy forged in the (α+β) region10.1016/j.jallcom.2017.02.285 ↗
15. Dynamic recrystallization mechanism and improved mechanical properties of a near α high temperature titanium alloy processed by severe plastic deformation10.1016/j.matchar.2020.110281 ↗
16. Effect of globularization behavior of the lamellar alpha on tensile properties of Ti-17 alloy10.1016/j.jallcom.2016.02.220 ↗
17. Microstructure evolution and mechanical properties of wire-feed electron beam additive manufactured Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy with different subtransus heat treatments10.1016/j.matdes.2020.109063 ↗
18. Predicting tensile properties of Ti-6Al-4V produced via directed energy deposition10.1016/j.actamat.2017.05.025 ↗
19. Effect of heat treatment on microstructures and tensile properties of TA19 alloy fabricated by laser metal deposition10.1016/j.msea.2020.139284 ↗
20. Microstructure-strength relationship of ultrafine-grained titanium manufactured by unconventional severe plastic deformation process10.1016/j.jallcom.2020.155576 ↗
21. Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate10.1016/j.actamat.2018.04.035 ↗
22. Effects of heating rate on the alloy element partitioning and mechanical properties in equiaxed α+β Ti-6Al-4V alloy10.1016/j.jmst.2021.02.061 ↗
23. Enhanced formability and forming ef fi ciency for two-phase titanium alloys by Fast light Alloys Stamping Technology (FAST)10.1016/j.matdes.2020.108948 ↗
24. Metallurgical-based prediction of stress-temperature induced rapid heating and cooling phase transformations for high speed machining Ti-6Al-4V alloy10.1016/j.matdes.2017.01.076 ↗
25. Study of alloy hot flow and hardening behavior using a new correction method for hot uniaxial tests
26. Phase transformations during cooling in α+β titanium alloys10.1016/S0921-5093(97)00802-2 ↗
27. Microstructure and mechanical properties of high strength two-phase titanium alloys10.5772/56197 ↗
28. The applicability of Johnson-Mehl-Avrami model in the thermal analysis of the crystallization kinetics of glasses10.1016/0040-6031(95)02466-2 ↗
29. Static recrystallization of Nb and Nb-B steels under continuous cooling conditions10.2355/isijinternational.36.1084 ↗
30. K. Fu, H. Peng, K. Zheng, S. Yuan, Phenomenological model of hardening and flow for Ti-6Al-4V titanium alloy sheets under hot forming conditions, 2022. https://doi.org/10.21203/rs.3.rs-1801729/v1.10.21203/rs.3.rs-1801729/v1 ↗
31. Mechanical behavior of Ti-6Al-4V at high and moderate temperatures-Part II: Constitutive modeling10.1016/S0921-5093(01)01508-8 ↗
32. Extended application of a unified creep-ageing constitutive model to multistep heat treatment of aluminium alloys10.1016/j.matdes.2017.03.023 ↗