journal article·2024-01Open access

Precipitation hardening and structure evolution in hypereutectic Al-6 % Fe-Zr alloys subjected to ultrasonic melt processing

S. Chankitmunkong, F. Wang, P. Pandee, C. Limmaneevichitr, D.G. Eskin

Abstract

The objective of this research was to study the influence of Zr concentration and ultrasonic melt processing (USP) on the microstructure and precipitation hardening of a hypereutectic Al-6% Fe alloy. Such alloys have a good potential in high-temperature, wear-resistant, and conducting applications but suffer from coarse structure and low strength/ductility, which prevents their processing. The microstructure of the studied alloys consisted of primary Al13Fe4 intermetallics and (Al)+Al13Fe4 eutectic colonies, which were successfully refined by adding Zr and performing USP. The mechanisms of USP and Zr were confirmed for the Al-6% Fe alloys with a range of Zr additions. The structure refinement led to improved hardness and tensile properties of the alloys. All studied alloys demonstrated strong precipitation hardening effect with hardness increasing 4-5 times, reaching 170 HV for the alloy with 0.4% Zr after annealing at 400 ℃ for 20 hrs. The electrical conductivity increased from 20% IACS in as-cast alloy to 40% IACS in the annealed Al-6% Fe-0.4% Zr alloy. The prime novelty of this work is a considerable increase of hardness upon annealing, i.e. more than 100 HV, in the Al-6% Fe alloy with only minute traces of Zr (<0.01%). The precipitation phenomena were investigated by transmission electron microscopy. The precipitation of the semi-coherent Al13Fe4 phase with Zr segregated to its surface was observed for the first time. All studied alloys (with minute and larger Zr additions) showed the precipitation of this phase, while the alloys with the larger amount of Zr also demonstrated the precipitation of the metastable L12 Al3Zr phase. Therefore, the properties improvement was attributed to the structure refinement and the formation of Zr-modified Al13Fe4 and Al3Zr precipitates in the microstructure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Effect of Fe content on the mechanical alloying and mechanical properties of Al-Fe alloys10.1007/BF00357340 ↗
2. Microstructure evolution in undercooled Al–8 wt%Fe melts: comparison between terrestrial and parabolic flight conditions10.1016/j.jallcom.2012.11.182 ↗
3. The effects of cell spacing and distribution of intermetallic fibers on the mechanical properties of hypoeutectic Al–Fe alloys10.1016/j.matchemphys.2009.08.063 ↗
4. Effects of Sc and Zr addition on the solidification and mechanical properties of Al–Fe alloys10.1016/j.jmrt.2022.02.070 ↗
5. Modification mechanisms of hypereutectic Al-Fe alloys treated by Sm/Yb addition: experiments and first-principles calculations10.1016/j.jallcom.2023.169786 ↗
6. Structure refinement, mechanical properties and feasibility of deformation of hypereutectic Al–Fe–Zr and Al–Ni–Zr alloys subjected to ultrasonic melt processing10.1016/j.msea.2020.139567 ↗
7. Eskin · 2015
8. Criteria of grain refinement induced by ultrasonic melt treatment of aluminum alloys containing Zr and Ti10.1007/s11661-010-0232-4 ↗
9. On the mechanism of grain refinement in Al–Zr–Ti alloys10.1016/j.jallcom.2010.09.046 ↗
10. In-situ observations and acoustic measurements upon fragmentation of free-floating intermetallics under ultrasonic cavitation in water10.1016/j.ultsonch.2021.105820 ↗
11. Influence of ultrasonic treatment on formation of primary Al3Zr in Al–0.4 Zr alloy10.1016/S1003-6326(17)60115-8 ↗
12. A new Al-Zr-Ti master alloy for ultrasonic grain refinement of wrought and foundry aluminum alloys10.1007/s11837-016-2120-x ↗
13. Nucleation and precipitation strengthening in dilute Al-Ti and Al-Zr alloys10.1007/s11661-007-9283-6 ↗
14. Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during isothermal aging at 375–425°C10.1016/j.actamat.2007.09.004 ↗
15. Microstructures and mechanical properties of aluminum-transition metal binary alloys (Al-Fe, Al-Mn, and Al-Cr) processed by laser powder bed fusion (LPBF)10.1016/j.jallcom.2021.159680 ↗
16. A novel laser powder bed fusion Al-Fe-Zr alloy for superior strength-conductivity trade-off10.1016/j.scriptamat.2022.114878 ↗
17. Microstructure and mechanical properties of Al-Fe-Sc-Zr alloy additively manufactured by selective laser melting10.1016/j.matchar.2021.111397 ↗
18. Optimization of hardening of Al–Zr–Sc cast alloys10.1007/s10853-006-0265-7 ↗
19. Mechanism of ultrasound-induced microstructure modification in Al–Zr alloys10.1016/j.actamat.2020.08.025 ↗
20. X-ray study of the decomposition of metastable Al-rich Al-Fe solid solutions10.1007/BF02663331 ↗
21. Decomposition of a supersaturated aluminum-rich aluminum-iron solid solution during annealing10.1016/0026-0800(70)90007-8 ↗
22. Age hardening in ultrafine-grained Al-2 pct Fe alloy processed by high-pressure torsion10.1007/s11661-015-2876-6 ↗
23. Calculation of phase diagrams for the metastable Al-Fe phases forming in direct-chill (DC)-cast aluminum alloy ingots10.1016/S0364-5916(98)00020-0 ↗
24. Belov · 2002
25. Crystallographic orientation relationships for Al-Fe and Al-Fe-Si precipitates in aluminium10.1016/0001-6160(88)90215-5 ↗
26. Effect of Zr content on the precipitation and dynamic softening behavior in Al–Fe–Zr alloys10.1016/j.matchar.2020.110181 ↗
27. Precipitation sequence in Al-Sc-Zr alloys revisited10.1016/j.mtla.2022.101608 ↗
28. Enhanced strength and ductility in ZrB2/2024Al nanocomposite with a quasi-network architecture10.1016/j.jallcom.2018.11.214 ↗
29. Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals10.1016/j.mattod.2017.02.003 ↗