journal article·2023-12

The balance between work hardening and softening behaviors of Mg-xZn-1Gd-0.2Ca-0.1Zr alloys influenced by trace Zn addition

Mei-li Hou, Kun-kun Deng, Cui-ju Wang, Kai-bo Nie, Quan-xin Shi

Publisher page

Abstract

In the present work, the effect of adding trace amounts of Zn element on the microstructure, mechanical properties, work hardening and softening behaviors of Mg-xZn-1Gd-0.2Ca-0.1Zr alloys (ZGX) (x = 1, 2, 3 wt%) were systematically investigated. With the decrease in Zn content, the static recrystallized rate of as-annealed ZGX alloys gradually increased and recrystallized grain size decreased. Besides, a decrease in Zn content inhibited the generation of large secondary phases but promoted the formation of finely dispersed secondary phases. The tensile tests of as-annealed ZGX alloys showed that the lower the Zn content, the greater the yield point elongation (YPE) and yield stress, mainly attributed to the hindrance of grain boundaries to dislocations. The work hardening rate of as-annealed ZGX alloy with high Zn content was higher than that of as-annealed ZGX alloy with low Zn content. At the same time, cyclic stress relaxation tests indicated that as-annealed ZGX alloy with high Zn content was easier to soften. The increase in Zn content broke the balance between work hardening and softening of as-annealed ZGX alloys, mainly reflected in the rapid reduction of stress for ZGX alloy with high Zn content during the loading process, which can be ascribed to the accumulated dislocations detached from the pinning of the grain boundary and the second phases. These results provided a reference for the follow-up study of the mechanical properties of Mg alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. What is going on in magnesium alloys?10.1016/j.jmst.2017.07.019 ↗
2. Microstructure and mechanical behavior of Mg-5Zn matrix influenced by particle deformation zone10.1016/j.jmst.2020.04.053 ↗
3. Excellent ductility and stretch formability of Mg-2Zn-1Mn-0.5Ca-0.1Gd sheet at room temperature10.1016/j.matlet.2020.128239 ↗
4. Microstructure and corrosion properties of Mg-4Zn-2Gd-0.5Ca alloy influenced by multidirectional forging10.1016/j.jallcom.2018.08.191 ↗
5. Effect of Nd on the microstructure and mechanical properties of Mg–3Zn-0.5Zr alloy10.1016/j.msea.2021.142562 ↗
6. Different effects of SiC dimensions on the microstructure and mechanical properties of magnesium matrix composites10.1016/j.msea.2022.143273 ↗
7. Degradation behavior of Mg-4Zn-2Ni alloy with high strength and high degradation rate10.1016/j.matchemphys.2020.123131 ↗
8. Evading strength-corrosion tradeoff in Mg alloys via dense ultrafine twins10.1038/s41467-021-24939-3 ↗
9. Substantial improvement in cold formability of concentrated Mg–Al–Zn–Ca alloy sheets by high temperature final rolling10.1016/j.actamat.2021.117328 ↗
10. Achieving high strength in graphene nanoplatelets reinforced Mg-Zn-Mn matrix composites via liquid-state molding technology and low temperature deformation process10.1016/j.jallcom.2023.171838 ↗
11. The corrosion resistance and discharge performance of as-extruded AZ91 alloy synergistically improved by the addition of submicron SiCp10.1016/j.electacta.2023.141843 ↗
12. Improved tensile properties of low-temperature and low-speed extruded Mg–χAl–(4.8 −χ)Ca–0.6Mn alloys10.1016/j.jmrt.2020.08.035 ↗
13. Microstructure and mechanical properties of Mg-4Zn-xGd (x=0, 0.5, 1, 2) alloys10.1016/j.jma.2019.06.005 ↗
14. Effect of grain size and volume fraction of eutectic structure on mechanical properties and corrosion behavior of as-cast Zn–Mg binary alloys10.1016/j.jmrt.2021.12.101 ↗
15. Influence of Zn on the microstructure and mechanical properties of Mg-Gd-Zr alloy10.1016/j.msea.2022.143136 ↗
16. Effects of Zn addition on the aging behavior and mechanical properties of Mg 8Al 2Sn wrought alloy10.1016/j.msea.2019.02.098 ↗
17. Effects of Zn on microstructure, mechanical properties and corrosion behavior of Mg–Zn alloys10.1016/j.msec.2012.07.042 ↗
18. Achieving high strength, excellent ductility, and suitable biodegradability in a Zn-0.1Mg alloy using room-temperature ECAP10.1016/j.jallcom.2022.166906 ↗
19. Simultaneously improved modulus, thermal expansion coefficient and wear resistance of a Mg–6Zn–1Gd–0.3Ca matrix composite by adding high volume fraction SiC particles10.1016/j.jmrt.2023.08.143 ↗
20. Recent progress of novel biodegradable zinc alloys: from the perspective of strengthening and toughening10.1016/j.jmrt.2022.01.004 ↗
21. Improved workability of an Mg-5 wt%Zn alloy by the addition of trace SiCp
22. Microstructure, texture, and strain-hardening behavior of extruded Mg–Gd–Zn alloys10.1016/j.msea.2019.138833 ↗
23. Effect of the Zn content on the microstructure and mechanical properties of indirect-extruded Mg–5Sn–xZn alloys10.1016/j.matdes.2011.02.012 ↗
24. Effect of Zn Addition on the Microstructure and Mechanical Properties of Cast Mg–10Gd–3.5Er–xZn–0.5Zr Alloys10.1007/s40195-020-01106-z ↗
25. The effect of Gd and Zn additions on microstructures and mechanical properties of Mg-4Sm-3Nd-Zr alloy10.1016/j.jallcom.2017.02.269 ↗
26. Hardening and softening in deformed magnesium alloys10.1016/S0921-5093(01)01296-5 ↗
27. Effect of Zn addition on the corrosion behaviours of as-cast BCC Mg-11Li based alloys in NaCl solution10.1016/j.matdes.2022.111019 ↗
28. Effect of Zn addition on the oxidation property of Mg-Y alloy at high temperatures10.1016/j.jallcom.2016.06.128 ↗
29. Opposite effects of Zn addition on the creep resistance at low and high temperatures for as-cast Mg-15Gd alloy10.1016/j.scriptamat.2022.114598 ↗
30. The influence of Zn content on the corrosion and wear performance of Mg-Zn-Ca alloy in simulated body fluid10.1007/s11665-016-2207-0 ↗
31. Effect of Zn content on the microstructure and mechanical properties of Mg-Gd-Y-Zr alloys10.1016/j.msea.2018.12.088 ↗
32. Effect of Zn addition on the microstructure and mechanical properties of cast, rolled and extruded Mg-6Sn-xZn alloys10.1016/j.msea.2016.10.075 ↗
33. Strain hardening of as-extruded Mg-xZn (x = 1, 2, 3 and 4 wt%) alloys10.1016/j.jmst.2018.09.015 ↗
34. Effect of Sc addition on the work-hardening behavior of ZK60 magnesium alloy10.1016/j.matdes.2012.07.050 ↗
35. Investigation on microstructure, mechanical properties and work hardening behavior of as-extruded Mg-4.5Zn-0.75Y-xZr alloys10.1088/2053-1591/ab57c1 ↗
36. Work hardening and softening behavior of pure Mg influenced by Zn addition investigated via in-situ neutron diffraction10.1016/j.msea.2019.138827 ↗
37. Cyclic hardening/softening behaviour in AZ31B magnesium alloy based on infrared thermography10.1080/02670836.2016.1173393 ↗
38. The work hardening and softening behaviors of Mg–6Zn-1Gd-0.12Y alloy influenced by the VR/VD ratio10.1016/j.msea.2022.143970 ↗
39. Effects of Mn addition on the microstructures, mechanical properties and work-hardening of Mg-1Sn alloy10.1016/j.msea.2019.02.021 ↗
40. Strong strain hardening ability in an as-cast Mg–3Al–3Sn alloy10.1016/j.matchemphys.2011.12.036 ↗
41. Effects of grain size, texture and twinning on mechanical properties and work-hardening behaviors of pure Mg10.1016/j.msea.2013.04.094 ↗
42. Excellent ductility and strong work hardening effect of as-cast Mg-Zn-Zr-Yb alloy at room temperature10.1016/j.jallcom.2017.09.016 ↗
43. Strain hardening behavior in Mg–Al alloys at room temperature
44. Development of high strength and formability Mg-6Zn-0.2Ca alloy via multi-pass warm rolling and aging treatment10.1016/j.msea.2021.141452 ↗
45. Influence of the Al2Ca phase on microstructure and mechanical properties of Mg–Al–Ca alloys10.1016/j.jallcom.2015.06.060 ↗
46. Dynamic recrystallization behavior during hot deformation and mechanical properties of 0.2μm SiCp reinforced Mg matrix composite10.1016/j.msea.2012.10.044 ↗
47. Local atomic structures of Gd and Zn atoms in extruded Mg-Gd-Zn alloys10.1016/j.scriptamat.2020.113720 ↗
48. Yield point elongation in fine-grained titanium10.1016/j.matlet.2012.12.115 ↗
49. D. Morris, Luders band deformation in a fine grained aluminium alloy, Acta Metallurgica Sinica (English Letters)[J], 25 (1977) 857–861.10.1016/0001-6160(77)90170-5 ↗
50. Yield point elongation due to twinning in a magnesium alloy10.1016/j.actamat.2011.11.022 ↗
51. Sensitivity of deformation twinning to grain size in titanium and magnesium10.1016/j.actamat.2011.09.018 ↗
52. Basic factors which influence the Luders strain during discontinuous yielding10.1016/0025-5416(71)90059-0 ↗
53. A unified theoretical model for work-hardening of polycrystalline metals10.1016/1359-6454(95)00342-8 ↗
54. Stage Ⅳ work hardening in cell forming materials, part Ⅱ: a new mechanism10.1016/S1359-6462(96)00320-X ↗
55. Improvement of ductility and work hardening ability in a high strength Zn-Mg-Y alloy via micron-sized and submicron-sized YZn12 particles10.1016/j.jallcom.2021.160268 ↗
56. J.K. Zhang, C.J. Wang, Y.D. Fan, C. Xu, K.B. Nie, K.K. Deng, Effect of Tip Content on the Work Hardening and Softening Behavior of Mg–Zn–Ca Alloy, Acta Metallurgica Sinica (English Letters)[J], (2023).10.1007/s40195-023-01557-0 ↗
57. Effects of precipitates and solute atoms on the work hardening and softening behavior of Zn-rich aluminum alloy10.1016/j.msea.2022.143388 ↗
58. Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd10.1016/j.actamat.2019.11.034 ↗
59. Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rolling10.1016/j.actamat.2006.05.018 ↗
60. The effect of Y addition on the microstructure and work hardening behavior of Mg-Zn-Zr alloys10.1007/s11665-021-05592-9 ↗
61. Work hardening and softening behaviors of Mg-Zn-Gd-Ca alloy regulated by bimodal microstructure10.1016/j.jallcom.2022.168606 ↗
62. Stress relaxation in selected magnesium alloys10.4028/www.scientific.net/KEM.345-346.1613 ↗
63. Stress relaxation in an AZ31 magnesium alloy10.4028/www.scientific.net/KEM.465.101 ↗
64. Work hardening and softening behavior of Mg–Zn–Ca alloy influenced by deformable Ti particles10.1016/j.msea.2021.142336 ↗
65. Unloading yield effect in a twin-roll-cast Mg–3Al–1Zn alloy10.1016/j.scriptamat.2014.12.018 ↗
66. Stress relaxation and the structure size-dependence of plastic deformation in nanotwinned copper10.1016/j.actamat.2009.07.018 ↗
67. The role of various Zr additions in static softening behavior of Al-Zn-Mg-Cu alloys during interval holding of double-stage hot deformation10.1016/j.jallcom.2019.04.090 ↗