journal article·2023-12

Novel insights on the grain boundary α phase microstructure formation and orientation development in Ti-6Al-4V alloy

Souvik Sahoo, Shibayan Roy

Publisher page

Abstract

The present work aims to understand the formation of microstructural features and their orientation development at the (prior) β grain boundary regions for Ti-6Al-4V alloy. The grain boundary region in the transformed microstructure primarily contains continuous grain boundary (GB) α phase along with GB α free regions at certain locations. Thin β phase generally separates adjacent GB α variants although it remains absent between many of them. The GB α variants usually follow Burgers orientation relationship (OR) with adjacent β grains although a few of them deviates from following Burgers OR and rather maintain near Potter or Pitsch-Schrader OR with the parent β grains on either side. While the GB α free locations possibly form due to the micro-segregation of β stabilizing elements during liquid→β transformation, the GB α variants without following Burgers OR are likely to associate with strong elemental partitioning during β→α transformation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Lutjering · 2007
2. Leyens · 2003
3. Synthesis, characterization, and bioactivity of SrTiO3-incorporated titanium coating10.1557/jmr.2018.99 ↗
4. A review on combustion behavior and mechanism of Ti alloys for advanced aero-engine10.1016/j.jallcom.2023.170584 ↗
5. Achieving low elastic modulus, excellent work hardening and high corrosion resistance in Ti-6Al-4V-5.6Cu alloy10.1016/j.jallcom.2023.170582 ↗
6. Novel insights on the near atomic scale spatial distributions of substitutional alloying and interstitial impurity elements in Ti-6Al-4V alloy10.1016/j.jallcom.2022.164511 ↗
7. Unusual stress-induced martensite transformation in Ti-6Al-4V alloy enabled by solution treatment in the lower α+β regime10.1016/j.jallcom.2023.170330 ↗
8. J. Zhao, The Deformation and Texture Evolution of Ti-10V–2Fe-3Al, in: Materials Engineering, Monash University, 2015, pp. 1–199.
9. Chapter 8 - Additive manufacturing of titanium alloys: microstructure and texture evolution, defect formation and mechanical response
10. Cubic-body-centered modification into the hexagonal-close-packed modification of zirconium
11. Development of solidification microstructure in boron-modified alloy Ti-6Al-4V-0.1B10.1016/j.actamat.2011.05.023 ↗
12. The effect of β stabilizers on the structure and energy of α/β interfaces in titanium alloys10.1007/s11661-021-06175-y ↗
13. An overview of the thermomechanical processing of α/β titanium alloys: current status and future research opportunities10.1007/s11661-020-05625-3 ↗
14. Microstructure and mechanical properties of Ti-6Al-4V cruciform structure fabricated by coaxial electron beam wire-feed additive manufacturing10.1016/j.jallcom.2023.170943 ↗
15. Effects of the morphology of grain boundary α-phase on the anisotropic deformation behaviors of additive manufactured Ti–6Al–4V10.1016/j.matdes.2022.111150 ↗
16. The role of phase transformation mechanism on the grain boundary network in a commercially pure titanium10.1016/j.matchar.2020.110640 ↗
17. The role of thermomechanical processing routes on the grain boundary network of martensite in Ti–6Al–4V10.1016/j.msea.2021.141665 ↗
18. Statistical modeling of microstructure evolution in a Ti-6Al-4V alloy during isothermal compression10.1016/j.actamat.2021.116827 ↗
19. Influence of transformation temperature on microtexture formation associated with α precipitation at β grain boundaries in a β metastable titanium alloy10.1016/j.actamat.2013.03.007 ↗
20. Electromagnetic shocking induced fatigue improvement via tailoring the α-grain boundary in metastable β titanium alloy bolts10.1016/j.jallcom.2023.171536 ↗
21. Crystallographic variant selection in Ti-6Al-4V10.1016/j.actamat.2004.07.034 ↗
22. Influence of alternate grain boundary α on the development of Widmanstätten microstructure in TC21 Ti alloy10.1016/j.matchar.2021.111162 ↗
23. Study on bifurcation behavior and morphology of the secondary grain boundary α phase in TC18 titanium alloy10.1016/j.jallcom.2022.163622 ↗
24. Precipitation and evolution behaviors of grain boundary α and α side plates for ultra-high strength titanium alloy during continuous cooling10.1016/j.matdes.2022.111562 ↗
25. A unified growth model of the secondary grain boundary α phase in TA15 Ti-alloy10.1016/j.jallcom.2016.08.013 ↗
26. Experimental assessment of variant selection rules for grain boundary α in titanium alloys10.1016/j.actamat.2015.09.021 ↗
27. Origin of morphological variation of grain boundary precipitates in titanium alloys10.1016/j.scriptamat.2022.114651 ↗
28. R. Shi, Variant Selection during Alpha Precipitation in Titanium Alloys A Simulation Study, in: Materials Science and Engineering, The Ohio State University, 2014, pp. 1–364.
29. Influence of faceting upon the equilibrium shape of nuclei at grain boundaries-I. Two-dimensions10.1016/0001-6160(75)90196-0 ↗
30. Influence of faceting upon the equilibrium shape of nuclei at grain boundaries-II. Three-dimensions10.1016/0001-6160(75)90197-2 ↗
31. Hierarchical criteria to promote fast and selective αGB precipitation at β grain boundaries in β-metastable Ti-alloys10.1016/j.actamat.2017.08.063 ↗
32. Grain boundary alpha and beta grain boundary orientation in titanium alloys
33. Using transmission Kikuchi diffraction to characterise α variants in an α+β titanium alloy10.1111/jmi.12569 ↗
34. Interphase boundary structures of intragranualr proeutectoid alpha plates in a hypoeutectoid Ti-Cr alloy10.1016/0956-7151(91)90104-9 ↗
35. Variant selection in heterogeneous nucleation on defects in diffusional phase transformation and precipitation10.1016/S0921-5093(00)01904-3 ↗
36. In-situ observation of single variant α colony formation in Ti-6Al-4V10.1016/j.actamat.2021.117315 ↗
37. The Kinetics of Primary Alpha Plate Growth in Titanium Alloys10.1007/s11661-019-05472-x ↗
38. M. Salib, M. Teixeira, L. Germain, B. Denand, N. Gey, E. Aeby-Gaurier, Influence of α Precipitation at β/β Grain Boundaries on a Microtexture in A β- Metastable Titanium Alloy with and without Previous Deformation, in: Proceedings of the 13th World Conference on Titanium, 2016, pp. 405–414.10.1002/9781119296126.ch63 ↗
39. Phase transformation, microstructures, and mechanical properties of α + β two-phase titanium alloy deposited metal by surfacing welding10.1155/2022/6415091 ↗
40. Predicting equilibrium shape of precipitates as function of coherency state10.1016/j.actamat.2012.04.019 ↗
41. D. Bhattacharyya, The development of textures and microstructures in alpha/beta titanium alloys, in: Materials Science and Engineering, The Ohio State University, 2004.
42. Study on the formation mechanism of α lamellae in a near β titanium alloy10.1016/j.pnsc.2016.06.009 ↗
43. Evaluation of influence of microstructural features of LPBF Ti-6Al-4V on mechanical properties for an optimal strength and ductility10.1016/j.jallcom.2023.170575 ↗
44. Formation mechanism of α lamellae during β→α transformation in polycrystalline dual-phase Ti alloys10.1016/j.jmst.2020.02.093 ↗
45. Criteria for fast and selective α precipitation at β grain boundaries in Ti-alloys Consequence for in-service microstructures10.1051/matecconf/202032112040 ↗
46. Evaluation of macrozone dimensions by ultrasound and EBSD techniques10.1016/j.matchar.2012.09.011 ↗
47. Local texture and fatigue crack initiation in a Ti-6Al-4V titanium alloy10.1046/j.1460-2695.2002.00480.x ↗
48. Study of the variant selection in sharp textured regions of bimodal IMI 834 billet10.1016/j.msea.2006.05.047 ↗
49. Experimental and crystal plasticity modelling study on the crack initiation in micro-texture regions of Ti-6Al-4V during high cycle fatigue tests10.1016/j.ijfatigue.2021.106203 ↗
50. The role of crystallographic texture and basal plane slip on microstructurally short fatigue crack initiation and propagation in forged billet and rolled bar Ti-6Al-4V alloy10.1007/s11661-021-06344-z ↗
51. An advanced approach to reconstructing parent orientation maps in the case of approximate orientation relations: Application to steels10.1016/j.actamat.2012.04.034 ↗
52. α Phase Growth and Branching in Titanium Alloys
53. The influence of partitioning on the growth of intragranular α in near-β Ti alloys10.1016/j.jallcom.2015.04.143 ↗
54. The evolution and growth kinetics of precipitate plates growing by the ledge mechanism10.1016/0956-7151(94)90193-7 ↗
55. Finite element modeling of the morphology of β to α phase transformation in Ti-6Al-4V alloy10.1007/s11661-002-0204-4 ↗
56. Dissolution of the Alpha Phase in Ti-6Al-4V During Isothermal and Continuous Heat Treatment10.1007/s11661-019-05164-6 ↗
57. porter · 2009
58. Banerjee · 2007
59. S. Nag, Influence of beta instabilities on the early stages of nucleation and growth alpha in beta titanium alloys, in: Materials Science and Engineering, The Ohio State University, 2008, pp. 1–282.
60. The structure, morphology and orientation relationship of V3N in α-vanadium10.1016/0022-5088(73)90165-3 ↗
61. Die Ausscheidungsform des ε-Karbids im Ferrit und im Martensit beim Anlassen10.1002/srin.195803018 ↗
62. Application of the invariant line model for b.c.c./h.c.p. couples: A criterion based on surface variations10.1016/0956-7151(93)90264-S ↗
63. Orientation relationships in precipitation systems10.1016/0001-6160(82)90045-1 ↗
64. S. Nag, Influence of beta instabilities on the early stages of nucleation and growth of alpha in beta titanium alloys, in: Materials Science and Engineering, The Ohio State University, 2008.
65. Experimental evidence of precipitation of all 12 variants in a single β grain in titanium alloys10.1155/2018/8632580 ↗
66. Effect of autocatalysis on variant selection of α precipitates during phase transformation in Ti-6Al-4V alloy10.1016/j.commatsci.2016.07.032 ↗
67. Comparison of residual stresses in Ti–6Al–4V and Ti–6Al–2Sn–4Zr–2Mo linear friction welds10.1179/174328408X332825 ↗
68. In situ observations of lattice expansion and transformation rates of α and β phases in Ti–6Al–4V10.1016/j.msea.2004.08.084 ↗
69. Microstructure evolution during alpha-beta heat treatment of Ti-6Al-4V10.1007/s11661-003-0300-0 ↗
70. The Effect of β Stabilizers on the Structure and Energy of α/β Interfaces in Titanium Alloys10.1007/s11661-021-06175-y ↗
71. R.M. Powers, The titanium-vanadium system, in, Iowa State University, 1952, pp. 1–236.
72. L. Tretyachenko, Al-Ti-V (Aluminium - Titanium - Vanadium): Datasheet from Landolt-Börnstein - Group IV Physical Chemistry·Volume 11A4: "Light Metal Systems. Part 4" in SpringerMaterials (https://doi.org/10.1007/11008514_4), in, Springer-Verlag Berlin Heidelberg.
73. Crystallography of precipitates in metals and alloys: (1) analysis of crystallography