Addressing the strength-ductility trade-off in a thermomechanical-processed high entropy alloy
Source abstract
Abstract
High entropy alloys (HEAs) have garnered significant attention due to their exceptional mechanical behavior. However, the influence of secondary phases and dislocation substructures has yet to be thoroughly investigated. This study focuses on the incorporation of the decomposed η-phase within a face-centered cubic (FCC) microstructure at different recrystallization levels, aiming to achieve adequate ductility while maintaining strength at gigapascal levels. Various characterization techniques were employed to analyze the microstructure of both homogenized and annealed+aged conditions. Implementing a sub-micron grain size distribution and introducing a favorable dislocation substructure significantly enhanced the mechanical properties of yield strength, ultimate tensile strength, and ductility, reaching up to 1291 MPa, 1450 MPa, and 17.5%, respectively. The results highlight the influential role of grain size in facilitating the generation of geometrically necessary dislocations during plastic deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. High-entropy alloys with heterogeneous microstructure: processing and mechanical properties10.1016/j.pmatsci.2020.100709 ↗
2. Additive manufacturing post-processing treatments, a review with emphasis on mechanical characteristics10.3390/ma16134610 ↗
3. Promising properties and future trend of eutectic high entropy alloys10.1016/j.scriptamat.2020.06.022 ↗
4. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
5. Single-phase high-entropy alloys – A critical update10.1016/j.matchar.2020.110179 ↗
6. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
7. High-entropy alloys10.1038/s41578-019-0121-4 ↗
8. A perspective on precipitation-hardening high-entropy alloys fabricated by additive manufacturing10.1016/j.matdes.2021.110161 ↗
9. High entropy alloys – Tunability of deformation mechanisms through integration of compositional and microstructural domains10.1016/j.msea.2021.141085 ↗
10. On the development of a novel multiphase high-entropy alloy with transformation-induced plasticity effect10.1016/j.jallcom.2022.164014 ↗
11. On the strain rate sensitivity of a TRIP assisted high entropy alloy10.1016/j.matlet.2022.133610 ↗
12. A TRIP-assisted dual-phase high-entropy alloy: Grain size and phase fraction effects on deformation behavior10.1016/j.actamat.2017.03.069 ↗
13. Lightweight, ultrastrong and high thermal-stable eutectic high-entropy alloys for elevated-temperature applications10.1016/j.actamat.2023.118806 ↗
14. Advancing strength and counteracting embrittlement by displacive transformation in heterogeneous high-entropy alloys containing sigma phase10.1016/j.actamat.2023.118717 ↗
15. Effect of layer architecture on the mechanical behavior of accumulative roll bonded interstitial free steel / aluminum composites10.1016/j.msea.2021.141387 ↗
16. Formation of nano-sized compounds during friction stir welding of Cu-Zn alloys: effect of tool composition10.1016/j.jmrt.2020.11.058 ↗
17. Towards stacking fault energy engineering in FCC high entropy alloys10.1016/j.actamat.2021.117472 ↗
18. Effects of Hf on the microstructure and mechanical properties of CoCrFeNi high entropy alloy10.1016/j.jallcom.2020.154159 ↗
19. Achieving exceptional strength-ductility synergy in a complex-concentrated alloy via architected heterogeneous grains and nano-sized precipitates10.1016/j.ijplas.2022.103398 ↗
20. Achieving high strength and ductility in ODS-W alloy by employing oxide-W core-shell nanopowder as precursor10.1038/s41467-021-25283-2 ↗
21. Multicomponent high-entropy Cantor alloys10.1016/j.pmatsci.2020.100754 ↗
22. Strengthening mechanisms in high entropy alloys: a review
23. Strategies for achieving strength–ductility synergy in face-centered cubic high- and medium-entropy alloys
24. Simultaneous improvement in strength and ductility of severely deformed niobium alloy10.1016/j.matlet.2020.128443 ↗
25. Precipitation hardening of high entropy alloy CoCrFeMnNi containing titanium10.1016/j.jallcom.2020.157610 ↗
26. Brittle intermetallic compound makes ultrastrong low-density steel with large ductility10.1038/nature14144 ↗
27. Nanoprecipitate-strengthened high-entropy alloys10.1002/advs.202100870 ↗
28. Towards superior mechanical properties of hetero-structured high-entropy alloys via engineering multicomponent intermetallic nanoparticles10.1016/j.scriptamat.2020.03.023 ↗
29. Microstructures and mechanical properties of the precipitation strengthened Al0.4Cr0.7FexNi2V0.2 high entropy alloys10.1016/j.msea.2023.144606 ↗
30. A novel L12-strengthened multicomponent Co-rich high-entropy alloy with both high γ′-solvus temperature and superior high-temperature strength10.1016/j.scriptamat.2021.113826 ↗
31. Elemental synergistic effect in CoxCrCuFeMnNi high-entropy alloys and its influence on phase and magnetic properties10.1016/j.jmrt.2023.01.171 ↗
32. Enhanced strength-ductility balance of the (CoCrFeNiMn)95.2Al3.2Ti1.6 high-entropy alloy by co-precipitation of the B2 and sigma phases10.1016/j.msea.2023.145039 ↗
33. Precipitation growth of σ-phase along the interface in CoCrFeMnNi high-entropy alloy10.1016/j.vacuum.2023.112103 ↗
34. Strengthening of a CrMnFeCoNi high-entropy alloy by carbide precipitation10.1016/j.jallcom.2019.04.121 ↗
35. Effect of molybdenum content on the microstructure and corrosion behavior of FeCoCrNiMo x high-entropy alloys10.1016/j.jmst.2019.10.020 ↗
36. Tune a highly ductile AlCrFe2Ni4 alloy by Ti addition for desired high mechanical strength10.1016/j.msea.2022.143910 ↗
37. Microstructure and mechanical properties of medium-entropy alloys with a high-density η-D024 phase10.1016/j.matchar.2021.111713 ↗
38. Realizing good combinations of strength-ductility and corrosion resistance in a Co-free Fe4Ni4Mn2CrTi high-entropy alloy via tailoring Ni/Ti-rich precipitates and heterogeneous structure10.1016/j.msea.2023.145223 ↗
39. Precipitate evolution and strengthening behavior during aging process in a 2.5 GPa grade maraging steel10.1016/j.actamat.2019.08.042 ↗
40. Extraordinary combination of strength and ductility in an additively manufactured Fe-based medium entropy alloy through in situ formed η-nanoprecipitate and heterogeneous microstructure
41. On the low-cycle fatigue behavior of a multi-phase high entropy alloy with enhanced plasticity10.1016/j.ijfatigue.2023.107678 ↗
42. Mechanism of dislocation evolution during plastic deformation of nitrogen-doped CoCrFeMnNi high-entropy alloy10.1016/j.msea.2021.141235 ↗
43. The deformation of plastically non-homogeneous materials
44. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
45. Effect of a multi-phase structure on the damping response of a novel high entropy alloy10.1016/j.matlet.2022.133095 ↗
46. Solidification of Mg–Zn–Zr Alloys: Grain Growth Restriction, Dendrite Coherency and Grain Size10.1007/s40195-020-01069-1 ↗
47. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures10.1016/j.actamat.2016.04.005 ↗
48. Evolution of dislocation density distributions in copper during tensile deformation10.1016/j.actamat.2013.08.027 ↗
49. Mechanical properties and deformation mechanisms of heterostructured high-entropy and medium-entropy alloys: a review10.3389/fmats.2021.792359 ↗
50. Geometrically necessary dislocations distribution in face-centred cubic alloy with varied grain size10.1016/j.matchar.2020.110205 ↗
51. Superior cryogenic tensile properties of ultrafine-grained CoCrNi medium-entropy alloy produced by high-pressure torsion and annealing10.1016/j.scriptamat.2019.01.016 ↗
52. New discoveries in deformed metals10.1007/s11661-001-0167-x ↗
53. The effects of recrystallization on strength and impact toughness of cold-worked high-Mn austenitic steels10.3390/met9090948 ↗
54. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
55. Plastic deformation mechanisms of NiCuCrMoTiAlNb Ni-based alloys at cryogenic temperature10.1016/j.msea.2016.03.133 ↗
56. On the current understanding of strain gradient plasticity10.1016/j.msea.2004.01.086 ↗
57. The tensile properties and serrated flow behavior of a thermomechanically treated CoCrFeNiMn high-entropy alloy10.1016/j.msea.2017.03.031 ↗
58. Temperature-dependent microstructural evolutions and deformation mechanisms of (Ni2Co2FeCr)92Al4Nb4 high-entropy alloys10.1016/j.jallcom.2022.165597 ↗
59. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
60. Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting10.1016/j.scriptamat.2018.05.015 ↗
61. In-situ high-resolution transmission electron microscopy investigation of grain boundary dislocation activities in a nanocrystalline CrMnFeCoNi high-entropy alloy10.1016/j.jallcom.2017.03.194 ↗
62. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
63. Quantification of precipitation hardening and evolution of precipitates10.2320/matertrans.43.1273 ↗
64. A comparison of nanoindentation pile-up in bulk materials and thin films10.1016/j.tsf.2014.06.060 ↗
65. Nanoindentation into a high-entropy alloy - An atomistic study10.1016/j.jallcom.2019.06.277 ↗