Thermal aging and CMAS corrosion behaviors of Y2SiO5 ceramic for environmental barrier coatings
Source abstract
Abstract
Yttrium silicate (Y 2SiO 5 ) is considered as one of the most promising candidate materials for environmental barrier coatings. In this paper, Y 2SiO 5 powder with a single phase were successfully prepared by high-temperature solid phase reaction method. The influence of sintering behavior on the microstructure, phase composition and mechanical properties of Y 2SiO 5 ceramics was studied at 1400 °C. In addition, the corrosion behavior and mechanism of Y 2SiO 5 against CMAS at 1250 °C and 1350 °C were also investigated. The results showed that the grain size of the prepared Y 2SiO 5 ceramic was about 1.28 µm with relatively uniform, and there were many pore structures. Although Y 2SiO 5 was still the main phase, a new small amount of Y 4.67(SiO 4) 3O phase was formed in Y 2SiO 5 ceramics after sintering at 1400 °C for 25 h. The sintering phenomenon of Y 2SiO 5 ceramics occurred at 1400 °C: the porosity decreased and the grain size grew. With the increase of sintering time, fracture toughness first increased and then decreased. The maximum fracture toughness was 4.84 MPa m 1/2 after 50 h sintering. Part of Y 2SiO 5 was dissolved in CMAS melt and Ca 4Y 6(SiO 4) 6O rare-earth oxyapatite phase was generated after CMAS corrosion for 24 h. The corrosion zone could be divided into loose corrosion area (about 93 µm thickness) and dense reaction layer with Ca 4Y 6(SiO 4) 6 O phase (about 16 µm thickness) at 1250 °C for 24 h. With the increase of corrosion time and corrosion temperature, both the corrosion depth of CMAS and the thickness of dense reaction layer increases. The dense Ca 4Y 6(SiO 4) 6O layer can effectively resist the further corrosion of CMAS melt.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Nuclear materials and radiation effects · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Materials science. The hotter the engine, the better10.1126/science.1179327 ↗
2. Advanced structural ceramics in aerospace propulsion10.1038/nmat4687 ↗
3. Ceramic-matrix composites enable revolutionary gains in turbine engine efficiency
4. Solid particle erosion behavior of melt-infiltrated SiC/SiC ceramic matrix composites (CMCs) in a simulated turbine engine environment10.1016/j.compositesb.2021.108860 ↗
5. Effects of microstructure on corrosion behaviors for RE2SiO5 (RE= Gd, Y, Er) environmental barrier coatings against calcium-magnesium-alumino-silicate melts10.1016/j.corsci.2022.110174 ↗
6. Property evolutions of Si/mixed Yb2Si2O7 and Yb2SiO5 environmental barrier coatings completely wrapping up SiCf/SiC composites under 1300 °C water vapor corrosion10.1016/j.ceramint.2021.04.246 ↗
7. Rare earth silicate environmental barrier coatings for SiC/SiC composites and Si3N4 ceramics10.1016/j.jeurceramsoc.2004.12.013 ↗
8. A review on environmental barrier coatings: History, current state of the art and future developments10.1016/j.jeurceramsoc.2020.10.057 ↗
9. Water vapor corrosion behaviors of plasma sprayed ytterbium silicate coatings10.1016/j.ceramint.2020.07.324 ↗
10. Thermal properties of single-phase Y2SiO510.1016/j.jeurceramsoc.2008.07.026 ↗
11. Oxygen permeability of Y2SiO510.2320/matertrans.42.1124 ↗
12. Water vapour corrosion of rare earth monosilicates for environmental barrier coating application10.1016/j.ceramint.2017.02.123 ↗
13. Effect of microstructure on the performance of Zr6Ta2O17 ceramics as thermal barrier coatings10.1016/j.ceramint.2023.06.061 ↗
14. Mechanical properties and calcium-magnesium-alumino-silicate (CMAS) corrosion behavior of a promising Hf6Ta2O17 ceramic for thermal barrier coatings10.1016/j.ceramint.2020.06.316 ↗
15. Comparative study on failure behavior of promising CMAS-resistant plasma-sprayed thermal barrier coatings in burner rig test with/without CMAS deposition10.1016/j.ceramint.2022.12.099 ↗
16. Corrosion behavior of calcium–magnesium–aluminosilicate (CMAS) on sintered Gd2SiO5 for environmental barrier coatings10.1111/jace.17703 ↗
17. Reaction between environmental barrier coatings material Er2Si2O7 and a calcia-magnesia-alumina-silica melt10.1016/j.ceramint.2022.03.001 ↗
18. Thermochemical interactions between CMAS and Ca2Y8 (SiO4)6O2 apatite environmental barrier coating material10.1016/j.jeurceramsoc.2019.08.040 ↗
19. The interaction of calcium–magnesium–aluminosilicate with ytterbium silicate environmental barrier materials10.1016/j.surfcoat.2015.08.069 ↗
20. The influence of calcium–magnesium–aluminosilicate deposits on internal stresses in Yb2Si2O7 multilayer environmental barrier coatings10.1016/j.actamat.2015.12.016 ↗
21. Corrosion behaviors and mechanisms of ytterbium silicate environmental barrier coatings by molten calcium-magnesium-alumino-silicate melts10.1016/j.corsci.2021.109718 ↗
22. Thermo-mechanical properties and CMAS resistance of (Ho0.4Yb0.3Lu0.3)2SiO5 solid solution for environmental barrier coating applications10.1016/j.ceramint.2022.10.266 ↗
23. Effects of pellet surface roughness and pre-oxidation temperature on CMAS corrosion behavior of Ti2AlC10.1007/s40145-022-0588-0 ↗
24. Composition effects of thermal barrier coating ceramics on their interaction with molten Ca-Mg-Al-silicate (CMAS) glass10.1016/j.actamat.2012.06.053 ↗
25. High-temperature CMAS resistance performance of Ti2AlC oxide scales10.1016/j.corsci.2020.108832 ↗
26. Impermeability of Y3Al5O12 ceramic against molten glassy calcium-magnesium-alumina-silicate10.1016/j.cja.2018.02.007 ↗
27. Determination of fracture toughness of brittle materials by indentation10.1016/S0894-9166(15)30010-0 ↗
28. Influence of Yb2Si2O7 doping concentration on mechanical properties and thermal conductivity of Yb2SiO5-Yb2Si2O7 composite ceramics10.1016/j.jallcom.2021.161718 ↗
29. Influence of Y3Al5O12 doping on mechanical properties and thermal conductivity of Sm2Zr2O7-Y3Al5O12 composite ceramics10.1016/j.jallcom.2020.155872 ↗
30. Influences of ZrSiO4 doping on microstructure and mechanical properties of Y2SiO5-ZrSiO4 ceramics10.1016/j.ceramint.2021.09.212 ↗
31. Effects of sintering method and sintering temperature on the microstructure and properties of porous Y2SiO510.1016/j.jmst.2015.09.016 ↗
32. Assessment of the performance of Y2SiO5-YSZ/YSZ double-layered thermal barrier coatings10.1016/j.jeurceramsoc.2018.09.024 ↗
33. Bioceramics of calcium orthophosphates10.1016/j.biomaterials.2009.11.050 ↗
34. Nanocrystalline hydroxyapatite with simultaneous enhancements in hardness and toughness10.1016/j.biomaterials.2009.08.048 ↗
35. Processing of dense nanostructured HAP ceramics by sintering and hot pressing10.1016/j.ceramint.2008.07.007 ↗
36. Hot corrosion of RE2SiO5 with different cation substitution under calcium-magnesium-aluminosilicate attack10.1016/j.ceramint.2017.04.045 ↗
37. Roles of composition and temperature in silicate deposit-induced recession of yttrium disilicate10.1016/j.actamat.2018.08.043 ↗
38. Silicate deposit degradation of engineered coatings in gas turbines: progress toward models and materials solutions10.1146/annurev-matsci-010917-105000 ↗