Influence of Si addition on the phase structure and oxidation behavior of PVD AlTiN and AlTiCrN coatings using high-resolution characterization techniques
Source abstract
Abstract
The influence of Si concentrations on AlTiN and AlTiCrN coatings deposited by PVD has been investigated by using high-resolution characterization techniques: TEM, Dynamic SIMS, Atom Probe Tomography (APT) analyses and nano hardness measurements. First, investigations focus on crystallographic phase stability, microstructural observations and micromechanical studies to understand the effect of the Si addition on these two nitride coatings. Second, the oxidation mechanisms and the kinetics of oxide growth at 950 °C for various durations are examined. Results indicate that the addition of Si introduces high compressive stresses in both coating groups, reaching values in the range of − 6 GPa. However, the behavior of Si content differs for AlTiN coatings with and without chromium. In AlTiSiN coatings, increasing Si addition leads to reduce residual stresses, while no significant change is observed for AlTiCrSiN coatings. This stress evolution is associated with a decrease in crystallinity density of the TiAlN coatings due to Si addition, but this structural phenomenon is not observed when Si is added to the quaternary metallic coatings TiAlCrN. Si content also influences the nanohardness, but the variation among coating is not substantial, with values around 34 + /− 2 GPa, and an elastic-modulus around 443 + /− 40 GPa. Regarding oxidation resistance at 950 °C, the addition of Si in AlTiN coating results in the formation of an external alumina oxide layer and beneath it, a nanometer sized TiO 2 anatase crystallites layer. After the growth of this bi-layer oxide scale, the inward cationic diffusion of the oxygen is very significantly reduced, and it can explain its high oxidation resistance. In contrast, for AlTiCrSiN coatings, the oxide scale morphology is different, consisting of a pure TiO 2rutile outer layer, followed by an Al-rich oxide and a mixed oxide region of (AlCr) 2O 3 with small islands of TiO 2 . The growth of this last oxide scale shows a regular increase over time, primarily driven by inward oxygen diffusion at the nitride coating interface.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Cutting performance of cubic boron nitride-coated tools in dry turning of hardened ductile iron10.1016/j.jmapro.2020.04.081 ↗
2. A review of developments towards dry and high speed machining of Inconel 718 alloy10.1016/S0890-6955(03)00159-7 ↗
3. Mechanical properties and machining performance of Ti1−xAlxN-coated cutting tools10.1016/j.surfcoat.2004.04.056 ↗
4. Oxidation of metastable single‐phase polycrystalline Ti0. 5Al0. 5N films: Kinetics and mechanisms.10.1063/1.345664 ↗
5. Modeling and prediction of cutting temperature in the machining of H13 hard steel of multi-layer coated cutting tools
6. High-temperature oxidation resistance of Cr1−xAlxN thin films deposited by reactive magnetron sputtering10.1016/S0257-8972(02)00589-3 ↗
7. Thermal stability and oxidation resistance of Cr1−xAlxN coatings with single phase cubic structure
8. Influence of Si on the microstructure of arc evaporated (Ti,Si)N thin films; evidence for cubic solid solutions and their thermal stability10.1016/j.surfcoat.2005.08.096 ↗
9. Structure, mechanical properties and thermal stability of Ti1-xSixN coatings10.1016/j.ceramint.2018.05.210 ↗
10. Selective oxidation and chemical state of Al and Ti in (Ti, Al)n coatings10.1002/sia.740120602 ↗
11. Atom probe tomography investigation of 3D nanoscale compositional variations in CVD TiAlN nanolamella coatings10.1016/j.surfcoat.2021.127741 ↗
12. High temperature oxidation of TiCrN coatings deposited on a steel substrate by ion plating10.1016/S0257-8972(01)01237-3 ↗
13. Thermal oxidation resistance of quaternary TiAlCrN coatings prepared with cathodic arc evaporation
14. Evolution behavior of oxide scales of TiAlCrN coatings at high temperature10.1016/j.surfcoat.2019.01.016 ↗
15. Influence of Cr additions on the structure and oxidation resistance of multilayered TiAlCrN films10.1016/j.surfcoat.2017.01.053 ↗
16. Study of the oxidation mechanism at high temperature of nanofiber textured AlTiCrN coatings produced by physical vapor deposition using high-resolution characterization techniques10.1016/j.corsci.2022.110226 ↗
17. Growth and characterization of nanostructured TiCrN films prepared by DC magnetron cosputtering10.1155/2014/609482 ↗
18. Decomposition and phase transformation in TiCrAlN thin coatings
19. Deposition and characterization of TiAlSiN nanocomposite coatings prepared by reactive pulsed direct current unbalanced magnetron sputtering10.1016/j.apsusc.2010.04.028 ↗
20. Influence of Si content on the microstructure, thermal stability and oxidation resistance of TiAlSiN/CrAlN multilayers10.1016/j.jallcom.2020.157441 ↗
21. Improved properties of TiAlN coating by combined Si-addition and multilayer architecture10.1016/j.jallcom.2019.03.248 ↗
22. Characterization of thermally treated TiAlSiN coatings by TEM and nanoindentation10.1016/j.surfcoat.2004.08.060 ↗
23. Effects of Si content and free Si on oxidation behavior of Ti–Si–N coating layers10.1016/S0040-6090(03)01083-6 ↗
24. Structure and properties of Al–Ti–Si–N coatings prepared by the cathodic arc ion plating method for high speed cutting applications10.1016/S0257-8972(01)01391-3 ↗
25. Tailoring the nanostructure of Ti–Si–N thin films by HiPIMS in deep oscillation magnetron sputtering (DOMS) mode10.1016/j.surfcoat.2014.12.065 ↗
26. Effect of Ti content on the microstructure and mechanical properties of TiAlSiN nanocomposite coatings10.1016/j.ijrmhm.2016.06.005 ↗
27. Microstructure and mechanical properties of nanocomposite (Ti,Si,Al)N coatings10.1016/S0040-6090(01)01348-7 ↗
28. Wear behavior and thermal stability of HPPMS (al, ti, cr, si) ON,(Al, ti, cr, si) n and (ti, al, cr, si) n coatings for cutting tools10.1016/j.surfcoat.2020.125370 ↗
29. Fabrication of multi-component Cr–Al–Ti–Si–N coatings by arc ion plating for high-speed machining10.1166/sam.2018.2850 ↗
30. Comparison on the structural, mechanical and tribological properties of TiAlN coatings deposited by HiPIMS and cathodic arc evaporation10.1016/j.surfcoat.2021.127529 ↗
31. Methods for obtaining the strain-free lattice parameter when using diffraction to determine residual stress10.1107/S0021889807030269 ↗
32. Reference to a website: Anton Paar, Instrumented indentation testing 〈https://wiki.anton-paar.com/en/instrumented-indentation-testing-iit/〉.
33. Atom probe tomography: development and application to the geosciences10.1111/ggr.12313 ↗
34. Oxidation behavior of titanium-aluminium nitrides10.1016/0257-8972(95)02566-9 ↗
35. Addition of Ta and Y in a hard Ti-Al-N PVD coating: Individual and conjugated effect on the oxidation and wear properties10.1016/j.corsci.2019.04.042 ↗
36. Internal structure of clusters of partially coherent nanocrystallites in Cr–Al–N and Cr–Al–Si–N coatings10.1016/j.surfcoat.2007.04.007 ↗