VS4/MoS2 heterostructures grown along graphene to boost reaction kinetics and reversibility for high performance lithium-sulfur batteries
Source abstract
Abstract
Lithium-sulfur batteries are regarded as one of the most promising next-generation energy storage systems due to their high theoretical volumetric and high weight energy density. However, there are severe problems in the application of lithium-sulfur batteries. The shuttle effect of soluble lithium polysulfide (LiPs) and the low conductivity of sulfur, which leads to slow redox kinetics, are hindering the more significant application of lithium-sulfur batteries. One of the viable solutions to the cathode problem of lithium-sulfur batteries is heterostructured materials. The built-in electric field provided by the heterostructure can significantly accelerate the kinetics of charge transport. In this work, we constructed a heterogeneous structure of G-VS 4/MoS 2 composites(PVM) modified by Polyvinylpyrrolidone(PVP) is constructed based on graphene, which consists of VS 4 nanosheets and MoS 2 nanosheets grown vertically on graphene lamellae. With weak van der Waals interactions, the one-dimensional (1D) chain-like VS 4 crystal structure enables fast charge transfer in Li-ion batteries. The two-dimensional (2D) lamellar MoS 2 crystals contain Mo-S bonds that also have adsorption effects on polysulfides. Density functional theory (DFT) calculations show that VS 4 and MoS 2 can increase the binding energy of the anode to the polysulfide. Therefore, the S@PVM cathode material provides a large capacity of 1061.4 mAh/g at 0.5 C and can still get to 808.3 mAh/g after 400th cycles. A capacity retention rate of 76.15% is obtained at the same time. It can also boast an initial discharge capacity of 834.8 mAh/g at 1 C. These works can provide more thoughts for developing cathode materials for lithium-sulfur batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Progress on the critical parameters for lithium–sulfur batteries to be practically viable10.1002/adfm.201801188 ↗
2. High-performance room-temperature sodium–sulfur battery enabled by electrocatalytic sodium polysulfides full conversion10.1039/C9EE03251G ↗
3. Dual redox catalysis of VN/nitrogen-doped graphene nanocomposites for high-performance lithium-sulfur batteries10.1016/j.jechem.2021.05.015 ↗
4. Activating inert metallic compounds for high-rate lithium–sulfur batteries through in situ etching of extrinsic metal10.1002/anie.201812062 ↗
5. Designing high-energy lithium–sulfur batteries10.1039/C5CS00410A ↗
6. Systematic study of effect on enhancing specific capacity and electrochemical behaviors of lithium–sulfur batteries
7. A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries10.1039/C7CS00139H ↗
8. A review on anode for lithium-sulfur batteries: progress and prospects10.1016/j.cej.2018.04.112 ↗
9. A revolution in electrodes: recent progress in rechargeable lithium-sulfur batteries10.1002/smll.201402354 ↗
10. Highly effective trapping-conversion interface based on nickel-modified versatile carbon skeleton enabled high-performance Li-S battery10.1021/acsami.1c01600 ↗
11. Graphene-based ultrathin microporous carbon with smaller sulfur molecules for excellent rate performance of lithium–sulfur cathode10.1016/j.jpowsour.2015.01.180 ↗
12. S-sphere/C/MoS2 composite for high-performance lithium–sulfur batteries10.1016/j.ceramint.2022.06.065 ↗
13. Single-wall carbon nanotube network enabled ultrahigh sulfur-content electrodes for high-performance lithium-sulfur batteries10.1016/j.nanoen.2017.10.053 ↗
14. Yolk-shell porous carbon spheres@CoSe2 nanosheets as multilayer defenses system of polysulfide for advanced Li-S batteries10.1016/j.cej.2020.127521 ↗
15. Highly fluoro-substituted covalent organic framework and its application in lithium-sulfur batteries10.1021/acsami.8b14213 ↗
16. Applications of transition-metal sulfides in the cathodes of lithium–sulfur batteries10.1007/s42864-020-00046-6 ↗
17. Nanostructured metal oxides and sulfides for lithium–sulfur batteries
18. Co9S8 nanotube wrapped with graphene oxide as sulfur hosts with ultra-high sulfur content for lithium-sulfur battery10.1016/j.ceramint.2020.09.118 ↗
19. Phosphorus doping of 3D structural MoS2 to promote catalytic activity for lithium-sulfur batteries
20. Vanadium dioxide plates reduced graphene oxide as sulfur cathodes for efficient polysulfides trap in long-life lithium-sulfur batteries10.1016/j.jcis.2022.09.028 ↗
21. V2O5 plates anchored in CNTS composite materials with a network structure as polysulfide capture for lithium–sulfur battery10.1016/j.ceramint.2022.07.177 ↗
22. Binder-free cobalt sulfide@carbon nanofibers composite films as cathode for rechargeable aluminum-ion batteries10.1016/j.cej.2020.128235 ↗
23. The metal–organic frameworks derived Co3O4/TiO2 heterojunction as a high-efficiency sulfur carrier for lithium–sulfur batteries10.1002/ente.202300092 ↗
24. Rational design of exfoliated 1T MoS2@CNT-based bifunctional separators for lithium sulfur batteries10.1039/C7TA08153G ↗
25. MoS2/celgard separator as efficient polysulfide barrier for long-life lithium–sulfur batteries10.1002/adma.201606817 ↗
26. High electrochemical selectivity of edge versus terrace sites in two-dimensional layered MoS2 materials10.1021/nl503730c ↗
27. CuO-ZnO heterojunction doped 2D ultrathin carbon nanosheet catalyzes rapid charge-transfer kinetics of lithium-sulfur batteries10.1016/j.apsusc.2023.157738 ↗
28. Surfactant-assisted RGO limited spherical FeS with superior stability and high capacity as an anode for lithium-ion batteries10.1016/j.electacta.2022.141517 ↗
29. Surfactant modified CNTs@S as cathode materials for high rate performance lithium sulfur batteries10.1016/j.jallcom.2022.165101 ↗
30. A surfactant-modified composite separator for high safe lithium ion battery10.1016/j.jechem.2022.10.013 ↗
31. Zwitterionic surfactant–stabilized ionogel electrolytes with high ionic conductivity for lithium secondary batteries10.1016/j.jpowsour.2022.232565 ↗
32. Preparation of graphitic oxide10.1021/ja01539a017 ↗
33. An all‐electron numerical method for solving the local density functional for polyatomic molecules10.1063/1.458452 ↗
34. From molecules to solids with the DMol3 approach10.1063/1.1316015 ↗
35. Semiempirical GGA-type density functional constructed with a long-range dispersion correction10.1002/jcc.20495 ↗
36. Boosting reaction kinetics and reversibility in Mott-Schottky VS(2)/MoS(2) heterojunctions for enhanced lithium storage10.1016/j.scib.2020.05.007 ↗
37. High-crystallinity urchin-like VS4 anode for high-performance lithium-ion storage10.1021/acsami.8b01876 ↗
38. Strengthening the interface between flower-like VS4 and porous carbon for improving its lithium storage performance10.1002/adfm.202000427 ↗
39. MoS2 quantum dots decorated reduced graphene oxide as a sulfur host for advanced lithium-sulfur batteries10.1016/j.electacta.2019.134994 ↗
40. MoS2 nanosheets/graphitized porous carbon nanofiber composite: a dual-functional host for high-performance lithium–sulfur batteries10.1016/j.jallcom.2019.153144 ↗
41. Functional group-dependent anchoring effect of titanium carbide-based MXenes for lithium-sulfur batteries: a computational study10.1016/j.apsusc.2017.04.013 ↗
42. Achieving job-synergistic polysulfides adsorption-conversion within hollow structured MoS2/Co4S3/C heterojunction host for long-life lithium–sulfur batteries10.1016/j.jcis.2022.06.091 ↗
43. Insight into the anchoring and catalytic effects of VO2 and VS2 nanosheets as sulfur cathode hosts for Li–S batteries10.1002/cssc.201901958 ↗
44. Tremella-like vanadium tetrasulfide as a high-performance cathode material for rechargeable aluminum batteries10.1021/acsami.2c20473 ↗
45. Unraveling the catalytic activity of Fe–based compounds toward Li2Sx in Li–S chemical system from d–p bands