Bio-inspired gradient multilayer ceramic fiber aerogel loaded with TaSi2 and WSi2: Fabrication, anti-oxidation and thermal insulation
Source abstract
Abstract
Aerogel is widely used in the field of thermal insulation. However, aerogel exhibits brittleness and infrared radiation transparency at high temperatures. Fiber composite aerogel achieved great progress, but the homogeneous structure hardly allowed heat convection, heat conduction, and heat radiation to be controlled simultaneously. In this paper, inspired by bamboo’s multilayer and gradient structure, SiC fiber loaded with TaSi 2 and WSi 2 antioxidant particles was prepared by electrostatic spinning. The fiber was incorporated into the silicoboron carbonitride (SiBCN) aerogel to prepare gradient multilayer SiC/SiBCN ceramic fiber aerogel. The fiber network enhanced the mechanical properties. Antioxidant particles improved antioxidant performance. Heat radiation was reduced through the fiber, while heat conduction and heat convection were decreased by the aerogel. The results showed that the ceramic fiber aerogel exhibited ultra-low thermal conductivity, excellent infrared radiation shielding, and antioxidation performance. This study is expected to provide new ideas for constructing high-temperature thermal insulation ceramic fiber aerogel.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerogels and thermal insulation · Supercapacitor Materials and Fabrication · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Electrospinning of SiO2-based composites embedded TiO2 nanoparticles with ultra-strong suppression of radiative heat transfer10.1016/j.jallcom.2023.170331 ↗
2. Preparation and characterization of hollow glass microsphere ceramics and silica aerogel/hollow glass microsphere ceramics having low density and low thermal conductivity10.1016/j.jallcom.2020.154737 ↗
3. Insulating and robust ceramic nanorod aerogels with high-temperature resistance over 1400 ℃10.1021/acsami.1c02501 ↗
4. Microstructural characterization and properties of ambient-dried SiO2 matrix aerogel doped with opacified TiO2 powder10.1016/j.jallcom.2008.01.154 ↗
5. Flame-retardant and leakage-proof phase change composites based on MXene/polyimide aerogels toward solar thermal energy harvesting10.1007/s42114-022-00504-4 ↗
6. Synthesis of lightweight and flexible composite aerogel of mesoporous iron oxide threaded by carbon nanotubes for microwave absorption10.1016/j.jallcom.2016.11.421 ↗
7. Characteristics of nanoporous silica aerogel under high temperature from 950 ℃ to 1200 ℃10.1016/j.matdes.2017.05.024 ↗
8. Silica-based aerogel composites reinforced with different aramid fibres for thermal insulation in Space environments10.1007/s10853-021-06142-3 ↗
9. Preparation of needled nonwoven enhanced silica aerogel for thermal insulation10.1016/j.csite.2023.103025 ↗
10. Modeling and coupling effect evaluation of thermal conductivity of ternary opacifier/fiber/aerogel composites for super-thermal insulation10.1016/j.matdes.2017.07.056 ↗
11. Opacified graphene-doped silica aerogels with controllable thermal conductivity10.1007/s10934-018-0583-6 ↗
12. Thermal-conductivity studies of macro-porous polymer-derived SiOC ceramics10.1007/s10765-013-1542-8 ↗
13. Synthesis and characterization of polymer-derived SiCN aerogel10.1016/j.jeurceramsoc.2015.04.018 ↗
14. Effects of polysiloxane on thermal conductivity and compressive strength of porous silica ceramics10.1016/j.ceramint.2019.07.109 ↗
15. Structural design of polymer-derived SiOC ceramic aerogels for high-rate Li ion storage applications10.1111/jace.14323 ↗
16. Effect of high temperature heat treatment on phase composition and microstructure of SiBCN/HfC ceramic composites10.15541/jim20190595 ↗
17. Polymer-derived SiBCN ceramic pressure sensor with excellent sensing performance10.1007/s40145-020-0377-6 ↗
18. Enhanced mechanical and thermal properties of anisotropic fibrous porous mullite-zirconia composites produced using sol-gel impregnation10.1016/j.jallcom.2017.01.007 ↗
19. Synthesis of light weight recron fiber-reinforced sodium silicate based silica aerogel blankets at an ambient pressure for thermal protection10.1007/s10934-022-01231-3 ↗
20. Hierarchical SiC fiber aerogel toward microwave attenuation and thermal insulation application10.1016/j.jallcom.2022.165097 ↗
21. Sintering behavior of SiO2 aerogel composites reinforced by mullite fibers via in-situ rapid heating TEM observations10.1016/j.jeurceramsoc.2019.09.014 ↗
22. Mechanically strong and thermally insulating polyimide aerogel fibers reinforced by prefabricated long polyimide fibers
23. Silica aerogel composites with embedded fibres: a review on their preparation, properties and applications10.1039/C9TA04811A ↗
24. Preparation, mechanical, thermal and ablative properties of lightweight needled carbon fibre felt/phenolic resin aerogel composite with a bird's nest structure10.1016/j.compscitech.2016.12.031 ↗
25. Radiative properties and heat transfer characteristics of fiber-loaded silica aerogel composites for thermal insulation10.1016/j.ijheatmasstransfer.2012.05.022 ↗
26. Infrared-opacified Al2O3-SiO2 aerogel composites reinforced by SiC-coated mullite fibers for thermal insulations10.1016/j.ceramint.2014.08.088 ↗
27. Heat transfer characteristics of silica aerogel composite materials: structure reconstruction and numerical modeling10.1016/j.ijheatmasstransfer.2015.12.025 ↗
28. Thermal conductivity enhancement of carbon fiber composites10.1016/j.applthermaleng.2008.03.004 ↗
29. Theoretical study on thermal conductivities of silica aerogel composite insulating material10.1016/j.ijheatmasstransfer.2012.11.016 ↗
30. Thermal conductivity of fiber and opacifier loaded silica aerogel composite10.1016/j.ijheatmasstransfer.2017.08.006 ↗
31. Surface-carbonized bamboos with multilevel functional biostructures deliver high photothermal water evaporation performance10.1002/adsu.202000126 ↗
32. A bionic method for the crashworthiness design of thin-walled structures inspired by bamboo10.1016/j.tws.2015.12.023 ↗
33. Bamboo fibre reinforced biocomposites: a review10.1016/j.matdes.2012.06.015 ↗
34. Hybrid approach to determine the mechanical parameters of fibers and matrixes of bamboo10.1016/j.conbuildmat.2012.03.011 ↗
35. Thermal conductivity of engineered bamboo composites10.1007/s10853-015-9610-z ↗
36. P. Huang, W.S. Chang, A. Shea, M.P. Ansell, M. Lawrence, Non-homogeneous thermal properties of bamboo, Materials and Joints in Timber Structures, Springer, Dordrecht, 657–664. https://doi.org/10.1007/978–94-007–7811-5_59.10.1007/978-94-007-7811-5_59 ↗
37. Synthesis and ceramic conversion of a novel processible polyboronsilazane precursor to SiBCN ceramic10.1016/j.ceramint.2012.02.045 ↗
38. Preparation and characterization of SiC fibers from PCS by electrospinning, curing and calcination process10.1002/slct.202102209 ↗
39. Highly flexible, erosion resistant and nitrogen doped hollow SiC fibrous mats for high temperature thermal insulators10.1039/C6TA09475A ↗
40. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
41. Mesoporous silicon carbide nanofibers with in situ embedded carbon for co-catalyst free photocatalytic hydrogen production10.1007/s12274-015-0971-z ↗
42. Anomalous diffraction approximation method for retrieval of spherical and spheroidal particle size distributions in total light scattering10.1016/j.jqsrt.2007.07.017 ↗
43. Three dimensional radiative heat transfer model for the evaluation of the anisotropic effective conductivity of fibrous materials10.1016/j.ijheatmasstransfer.2014.12.041 ↗
44. Palik · 1998
45. An ideal nano-porous insulation material: design, modeling and numerical validation10.1016/j.applthermaleng.2013.12.041 ↗
46. Volume fraction,mass fraction and void fraction of hybrid fiber composite material
47. Predictions of effective physical properties of complex multiphase materials10.1016/j.mser.2008.07.001 ↗
48. Multi-composition coating for oxidation protection of modified carbon-bonded carbon fiber composites10.1016/j.jeurceramsoc.2016.05.028 ↗
49. Effect of high temperature preoxidation treatment on the oxidation behavior of MoSi2- and WSi2-Al2O3 composites10.1016/j.jallcom.2019.152499 ↗
50. Oxidation resistance of hot-pressed SiC-BN composites10.1016/j.ceramint.2006.10.010 ↗
51. Thermal radiation shielded, high strength, fire resistant fiber/nanorod/aerogel composites fabricated by in-situ growth of TiO2 nanorods for thermal insulation10.1016/j.cej.2021.129342 ↗
52. Thermal radiation shielding and mechanical strengthening of mullite fiber/SiC nanowire aerogels using in situ synthesized SiC nanowires10.3390/ma15103522 ↗
53. A novel SiC nanowire aerogel consisted of ultra long SiC nanowires10.1088/2053-1591/aafaef ↗
54. Si3N4 nanofibrous aerogel with in situ growth of SiOx coating and nanowires for oil/water separation and thermal insulation10.1021/acsami.1c05575 ↗
55. Ultralight ceramic fiber aerogel for high-temperature thermal superinsulation10.3390/nano13081305 ↗
56. Fiber-reinforced alumina-carbon core-shell aerogel composite with heat-induced gradient structure for thermal protection up to 180010.1016/j.cej.2023.141721 ↗