Facile coating of micron/submicron Si with N-doped porous carbons to yield Si/C composites with good long-cycle stability
Source abstract
Abstract
Si/C composite is a promising anode material for high-energy-density lithium ion battery. However, preparing Si/C with good long cycle performance (>400 cycles) from micron/submicron Si was rarely reported. In this study, Si/C composites were prepared by coating rice-husk-based micron/submicron Si with N-doped porous carbon ; the coating was achieved via ball milling of the Si, melamine, and glucose before carbonization. The yielded composite showed a specific capacity of 1062.7 mAh/g at 0.5 A/g after 800 cycles. Such a long-cycle performance was rare for previously-reported Si/C composites derived from micron/submicron Si. The good performance was ascribable to the sufficient coverage of surface Si with N-doped porous carbons. Additionally, the process for conversion of micron/submicron Si was rather simple, in that it did not use expensive feedstocks, complicated equipment, or complex synthesis steps. The process was industrially promising in conversion of micron/submicron Si into Si/C composite with good long-cycle stability.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Progress of 3D network binders in silicon anodes for lithium ion batteries10.1039/D0TA07713E ↗
2. Challenges and recent progress in the development of Si anodes for lithium-ion battery10.1002/aenm.201700715 ↗
3. Scalable production of Si nanoparticles directly from low grade sources for lithium-ion battery anode10.1021/acs.nanolett.5b01698 ↗
4. Silicon as anode for high-energy lithium ion batteries: from molten ingot to nanoparticles10.1016/j.jpowsour.2015.09.040 ↗
5. Strategy to form homogeneously macroporous Si as enhanced anode material of Li-ion batteries10.1016/j.jallcom.2017.09.263 ↗
6. Carbon-coated porous Si/C composite anode materials via two-step etching/coating processes for lithium-ion batteries10.1016/j.ceramint.2020.07.128 ↗
7. A novel durable double-conductive core-shell structure applying to the synthesis of silicon anode for lithium ion batteries10.1016/j.jpowsour.2018.02.051 ↗
8. Facile synthesis of Si-C nanocomposites with yolk-shell structure as an anode for lithium-ion batteries10.1016/j.jallcom.2017.02.083 ↗
9. Well-dispersed double carbon layers coated on Si nanoparticles and the enhanced electrochemical performance for lithium ion batteries
10. Fabrication of porous Si/nitrogen doped carbon composite and its enhanced lithium storage capability10.1016/j.matchemphys.2017.08.026 ↗
11. A flexible and conductive binder with strong adhesion for high performance silicon‐based lithium‐ion battery anode10.1002/celc.201902152 ↗
12. High-safety and long-life silicon-based lithium-ion batteries via a multifunctional binder10.1021/acsami.0c17563 ↗
13. Si/C composite lithium-ion battery anodes synthesized using silicon nanoparticles from porous silicon10.1016/j.electacta.2014.04.045 ↗
14. Assessment of the electrochemical behaviour of silicon@carbon nanocomposite anode for lithium -ion batteries10.1016/j.jallcom.2020.154644 ↗
15. Efficient conversion of sand to nano-silicon and its energetic Si-C composite anode design for high volumetric capacity lithium-ion battery10.1016/j.jpowsour.2018.02.011 ↗
16. High-capacity flour-based nano-Si/C composite anode materials for lithium-ion batteries10.1007/s11581-019-03224-w ↗
17. Nano/Microstructured Silicon-Carbon Hybrid Composite Particles Fabricated with Corn Starch Biowaste as Anode Materials for Li-Ion Batteries10.1021/acs.nanolett.9b04395 ↗
18. High stability of sub-micro-sized silicon/carbon composites using recycling Silicon waste for lithium-ion battery anode10.1016/j.jallcom.2021.159124 ↗
19. A facile fabrication of micro/nano-sized silicon/carbon composite with a honeycomb structure as high-stability anodes for lithium-ion batteries10.1016/j.jelechem.2021.115074 ↗
20. Facile preparation of micron-sized silicon-graphite‑carbon composite as anode material for high-performance lithium-ion batteries10.1016/j.powtec.2022.117455 ↗
21. Stress-relief network in silicon microparticles and composite anodes for durable high-energy-density batteries10.1021/acsaem.1c01987 ↗
22. Mechanisms of Si nanoparticle formation by molten salt magnesiothermic reduction of silica for lithium-ion battery anodes10.1002/celc.202100683 ↗
23. Enhanced electrochemical performance of SiO anode material via nitrogen-doped carbon coating in a facile and green route10.1016/j.jelechem.2019.04.040 ↗
24. Ordered mesoporous Si microspheres with nitrogen-doped carbon coating for advanced lithium-ion battery anodes10.1016/j.jallcom.2019.06.009 ↗
25. Silicon nanoparticle self-incorporated in hollow nitrogen-doped carbon microspheres for lithium-ion battery anodes10.1016/j.electacta.2020.137630 ↗
26. 3-dimensional interconnected framework of N-doped porous carbon based on sugarcane bagasse for application in supercapacitors and lithium ion batteries10.1016/j.jpowsour.2018.04.056 ↗
27. Advanced electron energy loss spectroscopy for battery studies10.1002/adfm.202107190 ↗
28. Facilely tunable core-shell Si@SiOx nanostructures prepared in aqueous solution for lithium ion battery anode10.1016/j.electacta.2020.136068 ↗
29. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
30. Reconstructed nano-Si assembled microsphere via molten salt-assisted low-temperature aluminothermic reduction of diatomite as high-performance anodes for lithium-ion batteries10.1021/acsaem.1c00938 ↗
31. Double-carbon protected silicon anode for high performance lithium-ion batteries10.1016/j.jallcom.2019.151848 ↗
32. Improving long-cycle stability of rice husk–derived Si/C by coating it with rationally designed carbon
33. Optimal microstructural design of pitch-derived soft carbon shell in yolk-shell silicon/carbon composite for superior lithium storage10.1016/j.electacta.2021.137924 ↗
34. Structural changes in silicon anodes during lithium insertion/extraction10.1149/1.1652421 ↗
35. Facile, economical and environment-friendly synthesis process of porous N-doped carbon/SiOx composite from rice husks as high-property anode for Li-ion batteries10.1016/j.electacta.2020.135619 ↗
36. Electrochemical and Solid-State Lithiation of Graphitic C3N410.1021/cm303870x ↗
37. Carbon nitride nanofibres with exceptional lithium storage capacity: from theoretical prediction to experimental implementation10.1002/adfm.201803972 ↗
38. From sand to fast and stable silicon anode: Synthesis of hollow Si@void@C yolk-shell microspheres by aluminothermic reduction for lithium storage10.1016/j.cclet.2018.08.018 ↗
39. One-pot sol-gel synthesis of Si/C yolk-shell anodes for high performance lithium-ion batteries10.1016/j.jallcom.2020.155135 ↗
40. Spheres of graphene and carbon nanotubes embedding silicon as mechanically resilient anodes for lithium-ion batteries10.1021/acs.nanolett.2c00341 ↗
41. Core-shell structure of porous silicon with nitrogen-doped carbon layer for lithium-ion batteries10.1016/j.materresbull.2018.09.004 ↗
42. Cornlike ordered mesoporous silicon particles modified by nitrogen-doped carbon layer for the application of li-ion battery10.1021/acsami.7b10922 ↗
43. In situ generated carbon nanosheet-covered micron-sized porous Si composite for long-cycling life lithium-ion batteries10.1021/acsaem.0c02445 ↗
44. Scalable submicron/micron silicon particles stabilized in a robust graphite-carbon architecture for enhanced lithium storage10.1016/j.jcis.2019.07.110 ↗
45. Black glasses grafted micron silicon: a resilient anode material for high-performance lithium-ion batteries10.1039/D2TA03068C ↗