journal article·2023-10Open access

Microstructure analysis and cracking mechanism of aero-engine hot-end component K4169 superalloy based on in-situ EBSD test

Songjun Wang, Jianjun He, Weiping Li, Zhihui Gong, Libo Zhou, Jungang Yang, Yuhui Cai, Yuexin Du

Abstract

In order to comprehensively examine the premature crack sprouting phenomenon of the aero-engine hot-end component, high-temperature tensile along with in-situ EBSD tests had been performed on alloy K4169. The microstructural and mechanical properties of K4169 high-temperature alloy under different temperature working conditions were also conducted. The results revealed that as the stress intensity factor increases, the stress-strain curve exhibits three distinct stages. With an increase in working temperature, the material's mechanical properties significantly deteriorate, the Laves brittle phase precipitates at the grain boundary, and voids begin to sprout. In-situ EBSD date, it has been discovered that the cracks start to sprout at the concentration of tiny voids formed inside the alloy. Subsequently, after the crack is expanded, it will propagate along the grain boundary, demonstrating the characteristics of intergranular cracks. The predominant type of fracture for the K4169 alloy during the tensile tests at 650 °C and 680 °C is ductile fracture . The fracture mechanism transitions from being ductile to a mixed ductile-brittle model at 710 °C, the operating temperature. This research aims to thoroughly reveal the aero-engine's failure cracking process, which significantly impacts how the engine genuinely operates.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Additive Manufacturing Materials and Processes · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Effect of pretreatment process on microstructure and mechanical properties in Inconel 718 alloy10.1016/j.jallcom.2023.168707 ↗
2. Low cycle fatigue behavior of micro-grain casting K4169 superalloy at room temperature10.1016/j.pnsc.2022.10.009 ↗
3. Influence of yttrium on purification and carbide precipitation of superalloy K416910.1016/j.jmst.2021.01.049 ↗
4. Effect of deposit thickness on microstructure and mechanical properties at ambient and elevated temperatures for Inconel 718 superalloy fabricated by directed energy deposition10.1016/j.jallcom.2022.164723 ↗
5. Effect of precipitated phases on the mechanical properties and fracture mechanisms of Inconel 718 alloy
6. Plastic inhomogeneity and crack initiation in hybrid wrought - additively manufactured Inconel 71810.1016/j.matchar.2023.112815 ↗
7. The effect of subsequent heat treatment on the evolution behavior of second phase particles and mechanical properties of the Inconel 718 superalloy manufactured by selective laser melting10.1016/j.msea.2020.139931 ↗
8. Aero engine health monitoring, diagnostics and prognostics for condition-based maintenance: an overview
9. High temperature oxidation and oxychlorination behaviors of cold sprayed Inconel 718 deposits at 700°C10.1016/j.corsci.2022.110536 ↗
10. Effect of pretreatment process on microstructure and mechanical properties in Inconel 718 alloy
11. Evolution of microstructures and properties of the GH4169 superalloy during short-term and high-temperature processing10.1016/j.msea.2018.12.019 ↗
12. Effect of microstructural constituents on mechanical properties and fracture toughness of Inconel 718 with anomalous deformation behavior at 650°C10.1016/j.jallcom.2020.156276 ↗
13. Evolution of microstructural characteristics during creep behavior of Inconel 718 alloy10.1016/j.msea.2022.143859 ↗
14. Study on corrosion cracking and oxidation mechanism of Inconel 718 burner of gasifier pulverized coal10.1016/j.engfailanal.2020.104504 ↗
15. Frequency and wave-form effects on the fatigue crack growth behavior of alloy 718 at 298 K and 823 K10.1007/BF02646402 ↗
16. Grain size refinement, texture analysis and effect on the tensile properties of a novel Inconel 718
17. Fatigue short crack propagation behavior of selective laser melted Inconel 718 alloy by in-situ SEM study: influence of orientation and temperature10.1016/j.ijfatigue.2020.105739 ↗
18. Microscopic damage mechanisms during fatigue crack propagation at high temperature in GH4169 superalloy
19. Influence of solution heat treatment on microstructure and tensile properties of Inconel 718 formed by high-deposition-rate laser metal deposition10.1016/j.jallcom.2017.11.004 ↗
20. Investigation on the influence of heat treatment on Inconel 718 fabricated by selective laser melting: Microstructure and high temperature tensile property10.1016/j.jmapro.2020.11.002 ↗
21. In-situ SEM-EBSD investigation of the low-cycle fatigue deformation behavior of Inconel 718 at grain-scale10.1016/j.jmrt.2023.04.143 ↗
22. In-situ study of adjacent grains slip transfer of Inconel 718 during tensile process at high temperature10.1016/j.ijplas.2023.103554 ↗
23. In-situ observation of microstructurally small fatigue crack initiation and growth behaviors of additively-manufactured alloy 71810.1016/j.msea.2022.142682 ↗
24. Effects of temperatures on microstructure evolution and deformation behavior of Fe–32Ni by in-situ EBSD
25. Correlations between two EBSD-based metrics Kernel Average Misorientation and Image Quality on indicating dislocations of near-failure low alloy steels induced by tensile and cyclic deformations
26. Heat treatment for selective laser melting of Inconel 718 alloy with simultaneously enhanced tensile strength and fatigue properties10.1016/j.jallcom.2022.165171 ↗
27. High temperature oxidation and oxychlorination behaviors of cold sprayed Inconel 718 deposits at 700°C10.1016/j.corsci.2022.110536 ↗