Facile synthesis of Co/La-MOF/Ti3C2Tx nanocomposite for electromagnetic wave absorption
Source abstract
Abstract
Two-dimensional nanomaterial MXene Ti 3C 2T x with excellent electrical conductivity has received extensive attention in the electromagnetic wave (EMW) absorption field. However, the excessively high permittivity of Ti 3C 2T x is not conducive to impedance matching and the absorption of EMW. Considering the low permittivity and mesoporous structure of MOF, in this work, Co/La-MOF were in situ growth on the surfaces of Ti 3C 2T x by a facile co-solvothermal method. The obtained Co/La-MOF anchored on Ti 3C 2T x (Co/La-MOF/Ti 3C 2T x) composite exhibits low density with excellent EMW absorption performance. Co/La-MOF/Ti 3C 2T x-2 (Co 2+/La 3+ mass ratio of 16:3) shows the minimum reflection loss of − 44.15 dB at 4.00 GHz with the effective absorption bandwidth of 3.67 GHz in the frequency range of 14.03–17.70 GHz under 1.3 mm. In addition, the electromagnetic absorption mechanism of Co/La-MOF/Ti 3C 2T x was also investigated. It provides an effective strategy for the preparation of a novel absorber with high EMW absorbing performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Metamaterials and Metasurfaces Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Acquirement of strong microwave absorption of ZnFe2O4@SiO2@Reduced graphene Oxide/PVDF composite membranes by regulating crystallization behavior10.1021/acs.jpcc.0c03092 ↗
2. Fabrication of bimetallic metal-organic frameworks derived Fe3O4/C decorated graphene composites as high-efficiency and broadband microwave absorbers10.1016/j.compositesb.2021.109423 ↗
3. Constructing flower-like core@shell MoSe2-based nanocomposites as a novel and high-efficient microwave absorber10.1016/j.compositesb.2021.109067 ↗
4. Investigation and optimization of Fe/ZnFe2O4 as a wide-band electromagnetic absorber10.1016/j.jcis.2018.10.084 ↗
5. Enhanced microwave absorption performance of sulfur-doped hollow carbon microspheres with mesoporous shell as a broadband absorber10.1016/j.coco.2020.02.010 ↗
6. A flexible electromagnetic wave-electricity harvester10.1038/s41467-021-21103-9 ↗
7. 2D MXenes: electromagnetic property for microwave absorption and electromagnetic interference shielding10.1016/j.cej.2018.11.051 ↗
8. Graphene and MXene nanomaterials: toward high-performance electromagnetic wave absorption in Gigahertz band range10.1002/adfm.202000475 ↗
9. Developing MXenes from wireless communication to electromagnetic attenuation10.1007/s40820-021-00645-z ↗
10. Flower-like CoLa/Ti3C2Tx nanocomposites for high-performance electromagnetic wave absorption10.1016/j.jallcom.2022.167326 ↗
11. Gamma irradiation-induced preparation of graphene-Ni nanocomposites with efficient electromagnetic wave absorption10.3390/ma11112145 ↗
12. Radiation-induced synthesis of graphene/ferrites nanocomposites for enhanced microwave-absorbing properties10.1007/s10854-020-04176-y ↗
13. Recent advances in MXenes composites for electromagnetic interference shielding and microwave absorption10.1016/j.compositesa.2020.105956 ↗
14. Peculiar porous α-Fe2O3, γ-Fe2O3 and Fe3O4 nanospheres: facile synthesis and electromagnetic properties10.1016/j.powtec.2014.09.045 ↗
15. Synthesis of porous carbon embedded with NiCo/CoNiO2 hybrids composites for excellent electromagnetic wave absorption performance10.1016/j.jcis.2020.04.099 ↗
16. Metal‐organic frameworks for CO2 chemical transformations10.1002/smll.201602711 ↗
17. [Zn4O] cluster‐based metal‐organic frameworks as catalysts for conversion of CO210.1002/cjoc.201800587 ↗
18. Metal–organic framework-derived porous materials for catalysis10.1016/j.ccr.2018.02.008 ↗
19. Insight into the mechanism of CO2 adsorption on Cu–BTC and its composites with graphite oxide or aminated graphite oxide10.1016/j.cej.2013.11.037 ↗
20. Interface-induced enhanced electromagnetic wave absorption property of metal-organic frameworks wrapped by graphene sheets10.1016/j.jallcom.2018.11.411 ↗
21. Hollow porous CoNi/C composite nanomaterials derived from MOFs for efficient and lightweight electromagnetic wave absorber10.1016/j.carbon.2020.06.014 ↗
22. Synthesis, crystal structure of a iron-manganese bimetal MOF and its graphene composites with enhanced microwave absorption properties10.1016/j.jpcs.2020.109657 ↗
23. Effect of rare earth elements on electromagnetic and microwave absorption properties of Fe-based alloys10.1007/s11664-017-5657-8 ↗
24. High microwave absorption performance in Nd-substituted BaM/GO through sol-gel and high energy ball milling process10.1016/j.jallcom.2021.162207 ↗
25. Core–shell-type ZIF-8@ ZIF-67@POM hybrids as efficient electrocatalysts for the oxygen evolution reaction10.1039/C9QI00798A ↗
26. Self-assembled magnetic graphene supported ZIF-67 as a recoverable and efficient adsorbent for benzotriazole10.1016/j.cej.2015.09.075 ↗
27. Raman spectroscopy analysis of the structure and surface chemistry of Ti3C2Tx MXene10.1021/acs.chemmater.0c00359 ↗
28. Rational construction of Ti3C2Tx/Co-MOF-derived laminated Co/TiO2-c hybrids for enhanced electromagnetic wave absorption10.1021/acs.langmuir.8b03238 ↗
29. Spontaneous weaving of graphitic carbon networks synthesized by pyrolysis of ZIF-67 crystals10.1002/anie.201701252 ↗
30. Facile synthesis of MOF-derived concave cube nanocomposite by self- templated toward lightweight and wideband microwave absorption10.1016/j.carbon.2021.10.044 ↗
31. Capacitive behavior of MoS2 decorated with FeS2@carbon nanospheres10.1016/j.cej.2019.122240 ↗
32. Enhanced electromagnetic wave-absorbing performance of magnetic nanoparticles-anchored 2D Ti3C2Tx MXene10.1021/acsami.9b18504 ↗
33. "Tree blossom" Ni/NC/C composites as high-efficiency microwave absorbents10.1016/j.cej.2021.132621 ↗
34. MOF-derived Ni1− x Cox@carbon with tunable nano–microstructure as lightweight and highly efficient electromagnetic wave absorber10.1007/s40820-020-00488-0 ↗
35. Self-assembly-magnetized mxene avoid dual-agglomeration with enhanced interfaces for strong microwave absorption through a tunable electromagnetic property10.1021/acsami.9b11861 ↗
36. Self-assembled sandwich-like MXene-derived nanocomposites for enhanced electromagnetic wave absorption10.1021/acsami.8b16727 ↗
37. CoFe2O4/N-doped reduced graphene oxide aerogels for high-performance microwave absorption10.1016/j.cej.2020.124317 ↗
38. A versatile strategy towards magnetic/dielectric porous heterostructure with confinement effect for lightweight and broadband electromagnetic wave absorption10.1016/j.cej.2019.03.295 ↗
39. Rational construction of heterogeneous interfaces for bimetallic MOFs-derived/rGO composites towards optimizing the electromagnetic wave absorption10.1016/j.cej.2021.132238 ↗
40. Evolution from core-shell, yolk-shell to hollow structure of hierarchical SiO2@MoSe2@FeNi3 for enhanced electromagnetic wave absorption10.1016/j.jallcom.2021.161020 ↗
41. In situ deposition of pitaya-like Fe3O4@C magnetic microspheres on reduced graphene oxide nanosheets for electromagnetic wave absorber10.1016/j.compositesb.2020.108261 ↗
42. Direct synthesis of MOF-derived nanoporous CuO/carbon composites for high impedance matching and advanced microwave absorption10.1039/C6TC04048A ↗
43. The effect of samarium substitution on magnetic properties and microwave absorption of the rare earth-iron-boron compounds and composites10.1016/j.jallcom.2020.154179 ↗
44. Mesoporous carbon hollow microspheres with tunable pore size and shell thickness as efficient electromagnetic wave absorbers10.1016/j.compositesb.2019.03.055 ↗
45. Laminated microwave absorbers of A-site cation deficiency perovskite La0. 8FeO3 doped at hybrid RGO carbon10.1016/j.compositesb.2019.107246 ↗
46. Graphene and MXene nanomaterials: toward high‐performance electromagnetic wave absorption in gigahertz band range10.1002/adfm.202000475 ↗
47. Enhanced electromagnetic wave-absorbing performance of magnetic nanoparticles-anchored 2D Ti3C2Tx MXene10.1021/acsami.9b18504 ↗
48. Sandwich-like Fe&TiO2@C nanocomposites derived from MXene/Fe-MOFs hybrids for electromagnetic absorption10.1007/s40820-020-0398-2 ↗
49. Tailorable MOF architectures for high-efficiency electromagnetic functions10.1039/D1QM00659B ↗
50. Lightweight and efficient microwave absorbing materials based on walnut shell-derived nano-porous carbon10.1039/C7NR02628E ↗
51. Two-dimensional MoS2 modified using CoFe2O4 nanoparticles with enhanced microwave response in the X and Ku band10.1039/C8QI01304G ↗
52. A novel hierarchically porous magnetic carbon derived from biomass for strong lightweight microwave absorption10.1016/j.carbon.2018.10.027 ↗
53. Fabrication of ultralight helical porous carbon fibers with CNTs-confined Ni nanoparticles for enhanced microwave absorption10.1016/j.compositesb.2021.108814 ↗
54. Achieving tunability of effective electromagnetic wave absorption between the whole X-band and Ku-band via adjusting PPy loading in SiC nanowires/graphene hybrid foam10.1016/j.carbon.2018.02.084 ↗
55. Acidified bimetallic MOFs constructed Co/N co-doped low dimensional hybrid carbon networks for high-efficiency microwave absorption10.1016/j.carbon.2020.08.070 ↗
56. Engineering defects in 2D g-C3N4 for wideband, efficient electromagnetic absorption at elevated temperature10.1039/D1TA02785A ↗
57. Microwave-assisted synthesis of tremella-like NiCo/C composites for efficient broadband electromagnetic wave absorption at 2–40 GHz10.1016/j.cej.2019.122017 ↗