Tuning the microstructure and strengthening mechanism of the CoCrFeNi high-entropy alloy via doping metalloid and interstitial elements
Source abstract
Abstract
The synergistic strengthening and toughening of metalloid and interstitial elements were demonstrated for the first time in the CoCrFeNi high-entropy alloy (HEA) by the sequential addition of Si, B, and N elements. The addition of Si simultaneously enhances the strength and ductility of the CoCrFeNi HEA, further, the doping of B promotes the formation of Cr 2 B precipitates and the grain refinement, and the addition of N further refines the grain size and increases the lattice distortion and the degree of chemical short-range order (SRO). The strengthening effect to yield strength of the addition of Si, B, and N elements is well described by the strengthening model. Doping Si, B, and N elements can regulate the stacking fault energy (SFE), lattice distortion, and short-range order of the alloy, and consequently induce the multiple twins and nanoscale transformation from the face-centered cubic (FCC) to the hexagonal close-packed (HCP) phase upon room-temperature tension, which enhances the work-hardening capability of the alloy. Finally, a dual heterostructure of grain size and precipitate phase distribution is formed in CCFN-Si-B-N-700 HEA by regulating heat treatment. The yield strength of the current alloy is further enhanced up to 1.2 GPa, and the ductility is maintained at 13 %. This study not only provides new insights into the strengthening and toughening mechanism of metalloid and interstitial elements but also a new paradigm for the development of HEAs with excellent strength-ductility synergy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Ultrasonic-vibration-enhanced plasticity of an entropic alloy at room temperature10.1016/j.actamat.2021.117569 ↗
2. Functional properties and promising applications of high entropy alloys10.1016/j.scriptamat.2020.06.017 ↗
3. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
4. Thermal activation mechanisms and Labusch-type strengthening analysis for a family of high-entropy and equiatomic solid-solution alloys10.1016/j.actamat.2016.08.047 ↗
5. CALPHAD aided design of high entropy alloy to achieve high strength via precipitate strengthening10.1007/s40843-019-1170-7 ↗
6. Hardening of an Al0.3CoCrFeNi high entropy alloy via high-pressure torsion and thermal annealing10.1016/j.matlet.2015.03.066 ↗
7. Phase stability of Ti-containing high-entropy alloys with a bcc or hcp structure10.1016/j.jallcom.2022.164849 ↗
8. Novel Si-added CrCoNi medium entropy alloys achieving the breakthrough of strength-ductility trade-off10.1016/j.matdes.2020.109202 ↗
9. Metalloid substitution elevates simultaneously the strength and ductility of face-centered-cubic high-entropy alloys10.1016/j.actamat.2021.117571 ↗
10. Interstitial equiatomic CoCrFeMnNi high-entropy alloys: carbon content, microstructure, and compositional homogeneity effects on deformation behavior10.1016/j.actamat.2018.10.050 ↗
11. Investigating the micro and nanomechanical properties of CoCrFeNi-C high-entropy alloys containing eutectic carbides10.1016/j.msea.2020.140065 ↗
12. Short-range order strengthening in boron-doped high-entropy alloys for cryogenic applications10.1016/j.actamat.2020.04.052 ↗
13. Boron doped ultrastrong and ductile high-entropy alloys10.1016/j.actamat.2018.04.004 ↗
14. Massive interstitial solid solution alloys achieve near-theoretical strength10.1038/s41467-022-28706-w ↗
15. Nitrogen induced heterogeneous structures overcome strength-ductility trade-off in an additively manufactured high-entropy alloy
16. C and N doping in high-entropy alloys: a pathway to achieve desired strength-ductility synergy
17. Carbon and nitrogen co-doping enhances phase stability and mechanical properties of a metastable high-entropy alloy10.1016/j.jallcom.2020.154799 ↗
18. Strengthening and strain hardening mechanisms in precipitation-hardened CrCoNi medium entropy alloys10.1016/j.jallcom.2021.162962 ↗
19. Tailoring formation and proportion of strengthening phase in non-equiatomic CoCrFeNi high entropy alloy by alloying Si element10.1016/j.intermet.2022.107617 ↗
20. Effect of Si contents on the growth behavior of σ phase in SUS 309L stainless steels10.1016/S1359-6462(03)00481-0 ↗
21. T. Suzuki, S. Takeuchi, H. Yoshinaga, Dislocation Dynamics and Plasticity, 1991.10.1007/978-3-642-75774-7 ↗
22. Superior strain-hardening by deformation-induced nano-HCP martensite in Fe–Mn–Si–C high-manganese steel10.1016/j.msea.2021.141864 ↗
23. A critical review of the mechanical properties of CoCrNi-based medium-entropy alloys
24. F. Campbell, Elements of Metallurgy and Engineering Alloys, 2008.10.31399/asm.tb.emea.9781627082518 ↗
25. Ab initio development of a high-strength corrosion-resistant austenitic steel10.1016/j.actamat.2008.06.021 ↗
26. Progress in bearing performance of advanced nitrogen alloyed stainless steel, Cronidur 3010.1002/(SICI)1521-4052(199910)30:10<605::AID-MAWE605>3.0.CO;2-V ↗
27. Influences of nitrogen alloying on microstructural evolution and tensile properties of CoCrFeMnNi high-entropy alloy treated by cold-rolling and subsequent annealing10.1016/j.msea.2020.139472 ↗
28. Nitrogen-induced hardening in an austenitic CrFeMnNi high-entropy alloy (HEA)10.1016/j.msea.2020.140725 ↗
29. Interstitial-driven local chemical order enables ultrastrong face-centered cubic multicomponent alloys10.1016/j.actamat.2022.118495 ↗
30. High nitrogen alloying of AISI 316 L stainless steel powder by nitriding10.1016/j.powtec.2021.05.095 ↗
31. Effect of N on microstructure and mechanical properties of 16Cr5Ni1Mo martensitic stainless steel10.1016/j.matdes.2011.07.064 ↗
32. Enhancing the strength and ductility of CoCrFeMnNi high-entropy alloy by nitrogen addition10.1016/j.msea.2020.139587 ↗
33. Yield strength increase of a CoCrNi medium entropy alloy by interstitial nitrogen doping at maintained ductility10.1016/j.scriptamat.2019.12.007 ↗
34. Toward excellent tensile properties of nitrogen-doped CoCrFeMnNi high-entropy alloy at room and cryogenic temperatures10.1016/j.jallcom.2021.163217 ↗
35. Tuning deformation mechanisms of face-centered-cubic high-entropy alloys via boron doping10.1016/j.jallcom.2022.165103 ↗
36. The effects of carbon on the phase stability and mechanical properties of heat-treated FeNiMnCrAl high entropy alloys10.1016/j.msea.2019.01.083 ↗
37. The effect of solid-solution temperature on phase composition, tensile characteristics and fracture mechanism of V-containing CrMn-steels with high interstitial content C+N>1 mass. %10.1016/j.msea.2019.138534 ↗
38. A facile strengthening method by co-doping boron and nitrogen in CoCrFeMnNi high-entropy alloy10.1016/j.msea.2022.143307 ↗
39. Influence of nitrogen on corrosion behaviour of high nitrogen martensitic stainless steels manufactured by pressurized metallurgy10.1016/j.corsci.2018.09.002 ↗
40. Effect of boron on the fracture behavior and grain boundary chemistry of Ni3Fe10.1016/j.scriptamat.2010.08.027 ↗
41. Strengthening and deformation mechanism of a Fe20Co20Cr20Mn20Ni20 high entropy alloy with high nitrogen content
42. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
43. Theory of solid solution hardening10.1002/pssb.19700410221 ↗
44. Modelling solid solution hardening in high entropy alloys10.1016/j.actamat.2014.11.014 ↗
45. Modelling of solid solution strengthening in multicomponent alloys10.1016/j.msea.2017.06.001 ↗
46. Solving the strength-ductility tradeoff in the medium-entropy NiCoCr alloy via interstitial strengthening of carbon10.1016/j.intermet.2018.12.009 ↗
47. Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy10.1016/j.msea.2020.139242 ↗
48. Effect of nitrogen on corrosion behaviour of a novel high nitrogen medium-entropy alloy CrCoNiN manufactured by pressurized metallurgy10.1016/j.jmst.2018.03.021 ↗
49. Formation mechanism of fivefold deformation twins in nanocrystalline face-centered-cubic metals10.1063/1.1879111 ↗
50. Dislocation and twin substructure evolution during strain hardening of an Fe–22wt% Mn–0.6wt% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
51. Unraveling dual phase transformations in a CrCoNi medium-entropy alloy10.1016/j.actamat.2021.117112 ↗
52. Temperature-dependent hardening contributions in CrFeCoNi high-entropy alloy10.1016/j.actamat.2021.117371 ↗
53. Cryogenic-deformation-induced phase transformation in an FeCoCrNi high-entropy alloy10.1080/21663831.2018.1434250 ↗
54. Unveiling the electronic origin for pressure-induced phase transitions in high-entropy alloys10.1016/j.matt.2019.12.023 ↗
55. Effect of nitrogen on the electron structure and stacking fault energy in austenitic steels10.1016/j.scriptamat.2006.05.025 ↗
56. Impact of interstitial elements on the stacking fault energy of an equiatomic CoCrNi medium entropy alloy: theory and experiments10.1080/14686996.2022.2080512 ↗
57. The effect of nitrogen on the stacking fault energy in Fe–15Mn–2Cr–0.6C–xN twinning-induced plasticity steels10.1016/j.scriptamat.2014.08.004 ↗
58. Enhancing the radiation tolerance of high-entropy alloys via solute-promoted chemical heterogeneities10.1016/j.actamat.2022.118662 ↗
59. Direct observation of oxygen atoms taking tetrahedral interstitial sites in medium-entropy body-centered-cubic solutions
60. Tuning element distribution, structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
61. Influence of Si on sigma phase precipitation and pitting corrosion in superaustenitic stainless steel weld metal10.1016/j.matchemphys.2017.12.055 ↗
62. Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy10.1016/j.actamat.2018.10.017 ↗