Comparative analysis of the aging kinetics in low-alloyed Cu – Cr – Hf and Cu – Cr – Zr alloys after high pressure torsion
Source abstract
Abstract
The kinetics of phase precipitation during aging in the Cu – Cr – Hf and Cu – Cr – Zr alloys after high pressure torsion (HPT) has been studied and compared with quenching state. The effect of HPT on the kinetics of aging was revealed by the differential scanning calorimetry (DSC) and confirmed by changes in the microhardness and electrical resistivity. Analysis of the microstructure and phase precipitation after HPT and subsequent aging using a transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS) revealed three types of phases in each of the alloys: Cu matrix, chromium and zirconium- or hafnium-rich phases. By measuring the microhardness, a higher degree hardening after HPT and subsequent aging was revealed in the Cu – Cr – Hf alloy compared to the Cu – Cr – Zr alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Microstructure and properties of a Cu – Cr – Zr alloys10.1016/S0022-3115(01)00691-2 ↗
2. Effect of processing and heat treatment on behavior of Cu-Cr-Zr alloys to railway contact wire10.1007/BF02586158 ↗
3. Some thoughts on the mechanisms of in-reactor corrosion of zirconium alloys10.1016/j.jnucmat.2004.09.029 ↗
4. Experimental investigation and thermodynamic description of the Cu-Cr-Zr system10.1016/j.calphad.2017.07.002 ↗
5. Characterization of hot deformation behavior of Zr-2.5Nb-0.5Cu using processing maps10.1016/0022-3115(94)00379-3 ↗
6. Effect of heat treatment on the microstructure and corrosion resistance of a Zr – Sn – Nb – Fe – Cr alloy10.1016/j.jnucmat.2005.01.007 ↗
7. Copper and heat resistant copper alloys
8. Microstructure and properties of ultra-fine grain Cu–Cr alloy prepared by equal-channel angular pressing10.1016/j.msea.2007.01.105 ↗
9. Structure and properties of cu alloys alloying with Cr and Hf after equal channel angular pressing10.4028/www.scientific.net/AMR.922.651 ↗
10. Effect of precipitation on mechanical and wear properties of ultrafine-grained Cu–Cr–Zr alloy10.1016/j.wear.2014.01.007 ↗
11. Deformation microstructures, strengthening mechanisms, and electrical conductivity in a Cu–Cr–Zr alloy10.1016/j.msea.2015.01.065 ↗
12. Improvement of strength and conductivity in Cu-alloys with the application of high pressure torsion and subsequent heat-treatments10.1007/s10853-014-8339-4 ↗
13. Properties of zirconium-copрer-chromium alloys and their isothermal diagram of the copper corner
14. Structure of the ternary copper-chromium-zirconium phase diagram in the copper-rich phase
15. State diagram of Cu-Cr-Hf in the region of copper-rich alloys
16. The precipitation behaviour of ITER-grade Cu-Cr-Zr alloy after simulating the thermal cycle of hot isostatic pressing10.1016/S0022-3115(99)00285-8 ↗
17. Analysis of phases in a Cu–Cr–Zr alloy10.1016/S1359-6462(02)00353-6 ↗
18. D. Bradai. DSC analysis of commercial Cu−Cr−Zr alloy processed by equal channel angular pressing10.1016/S1003-6326(15)63671-8 ↗
19. Structure and properties of ultra-fine grain Cu−Cr−Zr alloy produced by equal-channel angular pressing10.1016/S1359-6454(01)00437-2 ↗
20. Precipitation processing of Cu-Cr-Zr alloys10.2320/jinstmet1952.36.4_363 ↗
21. Effect of equal-channel angular pressing on the precipitation kinetics in Cu-Cr-Hf alloys10.1016/j.msea.2019.04.073 ↗
22. Atomic scale investigation of Cr precipitation in copper10.1016/j.actamat.2012.01.038 ↗
23. Investigation of Cu5Zr particles precipitation in Cu-Zr and Cu-Cr-Zr alloys subjected to quenching and high strain rate deformation10.22226/2410-3535-2019-4-400-404 ↗
24. Stored energy, vacancies and thermal stability of ultra-fine grained copper10.1016/j.msea.2008.02.048 ↗
25. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
26. Influence of microalloying with zirconium on the structure and properties of Cu-Cr alloy after high pressure torsion10.1016/j.msea.2015.10.008 ↗