journal article·2023-08

Interface engineering toward self-corrosion inhibited alkaline aluminum-air battery via optimized electrolyte system

Chong Zhu, Liang Luo, Lijin Yan, Jiangyu Hao, Youcun Bai, Bin Xiang, Yang Zhou, Lei Guo

Publisher page

Abstract

In this manuscript, an introduced ionic liquids-ethylene glycol-KOH electrolyte system is proposed. Theoretical calculations and experiments show that ionic liquids with stronger hydrophobicity provide better corrosion inhibition for their spontaneous adsorption behavior and water molecule segregation. In this process, the imidazole ring cations play a major role. The electrolyte system reconstructs the Al/electrolyte interface with poor H 2O, thus has lower self-corrosion rate for [BMIM]PF 6 and contributes to the uniform dissolution of Al anode. Additionally, discharge performance of the full-cell feature same trend, endowing an outstanding capacity of 1971 mAh g −1 and anode utilization of 66.2% in alkaline [BMIM]PF 6-ethylene glycol electrolyte. In terms of maintaining the activity of the Al-6061 anode whilst keeping low corrosion rate level, the proposed electrolyte system seems to be potential alternative.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Magnesium Oxide Properties and Applications · Ionic liquids properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Effect of aluminum oxide on the performance of ionic liquid-based aluminum-air battery10.3390/en13082014 ↗
2. A comprehensive review on recent progress in aluminum–air batteries10.1016/j.gee.2017.06.006 ↗
3. Excellent performance of dodecyl dimethyl betaine and calcium gluconate as hybrid corrosion inhibitors for Al alloy in alkaline solution10.1016/j.corsci.2022.110556 ↗
4. Evaluation of AA5052 alloy anode in alkaline electrolyte with organic rare-earth complex additives for aluminium-air batteries10.1016/j.jpowsour.2015.05.104 ↗
5. Parametric study and optimization of a low-cost paper-based Al-air battery with corrosion inhibition ability10.1016/j.apenergy.2019.113342 ↗
6. Electrochemical hydrogen and electricity production by using anodes made of commercial aluminum10.1016/j.ijhydene.2018.11.202 ↗
7. Performance of Al-0.5 Mg-0.02 Ga-0.1 Sn-0.5 Mn as anode for Al-air battery10.1149/2.074403jes ↗
8. Recent developments in materials for aluminum–air batteries: A review10.1016/j.jiec.2015.08.004 ↗
9. Aluminum–air batteries: A viability review10.1016/j.est.2020.101287 ↗
10. Performance of commercial aluminium alloys as anodes in gelled electrolyte aluminium-air batteries10.1016/j.jpowsour.2015.08.088 ↗
11. Electrochemical performance of pure Al, Al–Sn, Al–Mg and Al–Mg–Sn anodes for Al-air batteries10.1016/j.jallcom.2019.151708 ↗
12. Polarization origin and iron positions in indium doped barium hexaferrites10.1016/j.ceramint.2017.09.172 ↗
13. Phase transformations in FeCo-Fe2CoO4/Co3O4-spinel nanostructures as a result of thermal annealing and their practical application10.1007/s10854-021-06226-5 ↗
14. Magnetic, dielectric and microwave properties of the BaFe12-xGaxO19 (x ≤ 1.2) solid solutions at room temperature10.1016/j.jmmm.2017.06.022 ↗
15. Effect of treatment conditions on structure and magnetodielectric properties of barium hexaferrites10.1016/j.jmmm.2019.166190 ↗
16. 1-Allyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide as an effective organic additive in aluminum-air battery10.1016/j.electacta.2017.05.116 ↗
17. Electrospun Al2O3 film as inhibiting corrosion interlayer of anode for solid aluminum–air batteries10.3390/batteries6010019 ↗
18. The role of SO-group-based additives in improving the rechargeable aluminium-air batteries
19. Effect of nonionic surfactant as an electrolyte additive on the performance of aluminum-air battery10.1016/j.jpowsour.2018.11.086 ↗
20. Chrysanthemum coronarium leaves extract as an eco-friendly corrosion inhibitor for aluminum anode in aluminum-air battery
21. Understanding the synergistic effect of alkyl polyglucoside and potassium stannate as advanced hybrid corrosion inhibitor for alkaline aluminum-air battery10.1016/j.cej.2019.123162 ↗
22. Modified alkaline electrolyte with 8-hydroxyquinoline and ZnO complex additives to improve Al-air battery10.1016/j.jpowsour.2019.05.077 ↗
23. Study of the effect of ion irradiation on increasing the photocatalytic activity of WO3 microparticles10.1007/s10854-020-05130-8 ↗
24. Synthesis, characterization, and magnetic properties of Mn nanoferrites10.1016/j.jallcom.2022.166954 ↗
25. Anomalies in Ni-Fe nanogranular films growth10.1016/j.jallcom.2018.03.245 ↗
26. Synthesis, structural, strength and corrosion properties of thin films of the type CuX (X=Bi, Mg, Ni)10.1007/s10854-019-01556-x ↗
27. Efect of magnetic fillers and their orientation on the electrodynamic properties of BaFe12-xGaxO19 (x = 0.1-1.2)-epoxy composites with carbon nanotubes within GHz range10.1007/s13204-020-01477-w ↗
28. Impact of the nanocarbon on magnetic and electrodynamic characteristics of the ferrite/polymer composites10.3390/nano12050868 ↗
29. Rechargeable aluminum-air battery using various air-cathode materials and suppression of byproducts formation on both anode and air cathode10.1149/08010.0377ecst ↗
30. Hybrid ionic liquid propylene carbonate-based electrolytes for aluminum-air batteries10.1021/acsaem.9b02288 ↗
31. High-capacity dual-electrolyte aluminum-air battery with circulating methanol anolyte10.3390/en13092275 ↗
32. Near solution-level conductivity of polyvinyl alcohol based electrolyte and the application for fully compliant Al-air battery10.1016/j.cej.2021.134283 ↗
33. A promising hybrid additive for enhancing the performance of alkaline aluminum-air batteries10.1016/j.matchemphys.2020.123787 ↗
34. Anode interfacial layer construction via hybrid inhibitors for high-performance Al-air batteries
35. Experimental and computational evaluations of cefotaxime sodium drug as an efficient and green corrosion inhibitor for aluminum in NaOH solution10.1016/j.matchemphys.2022.126546 ↗
36. Electrochemical and quantum chemical study of purines as corrosion inhibitors for mild steel in 1 M HCl solution10.1016/j.electacta.2008.03.065 ↗
37. Corrosion inhibition of aromatic acids on Al-7075 anode for Al-air batteries with alkaline electrolyte10.1016/j.jpowsour.2022.231042 ↗
38. 1-Ethyl 3-methylimidazolium thiocyanate ionic liquid as corrosion inhibitor of API 5L X52 steel in H2SO4 and HCl media10.1016/j.corsci.2019.03.041 ↗
39. Imidazolium-based ionic liquid as efficient corrosion inhibitor for AA 6061 alloy in HCl solution10.3390/ma13204672 ↗
40. Ionic liquid as an effective corrosion inhibitor on 6061 Al-15 Vol. Pct. SiC(p) composite in 0.1 M H2SO4 medium - an ecofriendly approach
41. The effect of grain size on aluminum anodes for Al–air batteries in alkaline electrolytes10.1016/j.jpowsour.2015.03.063 ↗
42. 3-Ethyl-4-amino-5-mercapto-1, 2, 4-triazole as corrosion inhibitor for 6061-alloy in sodium hydroxide solution10.4152/pea.201106445 ↗
43. Inhibition effect and mechanism of inorganic-organic hybrid additives on three-dimension porous aluminum foam in alkaline Al-air battery10.1016/j.jpowsour.2019.227460 ↗
44. Corrosion control of aluminum in solutions of NaCl, HCl and NaOH using 2,6-dimethylpyridine inhibitor: Experimental and DFT insights10.1016/j.matchemphys.2020.122681 ↗
45. The hydrogen bonding interactions between the ionic liquid 1-ethyl-3-methylimidazolium ethyl sulfate and water10.1021/jp1009498 ↗
46. Electrochemical impedance spectroscopy analysis on the electrochemical dissolution of aluminum in an alkaline solution10.1016/S0022-0728(03)00266-3 ↗
47. Peculiarities of magnetic phase separation in anion-deficient La0.70Sr0.30MnO2.85 manganite10.1134/S1063783411090307 ↗
48. Evaluation of the efficiency of detection and capture of manganese in aqueous solutions of FeCeOx nanocomposites doped with Nb2O510.3390/s20174851 ↗
49. Stability analysis of the Mg2Si Phase in AA 6061 aluminum alloy10.1016/j.mspro.2012.06.074 ↗
50. Correlation between composition and electrodynamics properties in nanocomposites based on hard/soft ferrimagnetics with strong exchange coupling10.3390/nano9020202 ↗
51. Effect of doping of Ce4+/3+ on optical, strength and shielding properties of (0.5-x)TeO2-0.25MoO-0.25Bi2O3-xCeO2 glasses10.1016/j.matchemphys.2021.124444 ↗
52. Synthesis and structure of nanocrystalline La0.50Ba0.50MnO310.1134/S1063774508070158 ↗
53. Study of hydrogenation processes in radiation-resistant nitride ceramics10.1007/s10854-020-03671-6 ↗
54. Surface chemistry of carbon electrodes in 1-ethyl-3-methylimidazolium tetrafluoroborate ionic liquid - an in situ infrared study10.1016/j.electacta.2014.01.077 ↗
55. Intensification phenomenon of weak ionic interactions of 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid macro-dispersed in poly (methyl methacrylate): FTIR spectroscopic evidence10.1016/j.molliq.2016.02.037 ↗
56. Synergistic effect between glutamic acid and rare earth cerium (III) as corrosion inhibitors on AA5052 aluminum alloy in neutral chloride medium10.1007/s11581-018-2605-4 ↗
57. Ionic liquids as green and sustainable corrosion inhibitors for metals and alloys: An overview10.1016/j.molliq.2017.02.111 ↗
58. Experimental and quantum chemical studies of some bis(trifluoromethyl-sulfonyl) imide imidazolium-based ionic liquids as corrosion inhibitors for mild steel in hydrochloric acid solution10.1021/ie300977d ↗