Highly conductive and robust telluride-carbon hybrid matrix for enhanced copper diphosphide anode in Li-ion batteries
Source abstract
Abstract
CuP 2 is a phosphorous-rich transition metal phosphide that can be a potential anode for Li-ion batteries (LIBs) because of its high theoretical capacity (∼1280 mA h g −1 ) and intrinsic alleviation of volume change owing to the presence of inactive Cu. Despite these advantages, the electrochemical performance of CuP 2 is not satisfactory owing to its low electrical conductivity and insufficient regulation of large volume expansion during cycling. Herein, we propose a CuP 2 -Te-C ternary composite as a high-performance anode material for LIBs. The presence of Te-C can circumvent the limitations of CuP 2, as it can synergistically increase the electrical conductivity while mitigating the cycling instability. The individual roles of Te and C in enhancing the active CuP 2 performance were studied using various morphological and electrochemical characterizations. Furthermore, an appropriate C content (25 wt%) that can increase the specific capacity while maintaining cycling stability was determined. Under these conditions, CuP 2-Te-C(25 %) displayed a good cycling performance (532 mA h g −1 at 100 mA g −1 after 100 cycles) and rate capability (501 mA h g −1 at 3.0 A g −1). The superior performance of CuP 2 -Te-C(25 %) studied comprehensively using electrochemical impedance spectroscopy revealed a higher diffusivity and lower charge transfer resistance for CuP 2-Te-C(25 %) than its counterparts. This study presents new perspectives on high-performance metal-phosphide anode materials for LIBs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. A review on the growing concern and potential management strategies of waste lithium-ion batteries10.1016/j.resconrec.2017.11.001 ↗
2. Recycling and environmental issues of lithium-ion batteries: advances, challenges and opportunities10.1016/j.ensm.2021.02.032 ↗
3. Recycling of end-of-life lithium ion batteries, Part I: commercial processes10.1007/s40831-019-00235-9 ↗
4. Li-ion storage in orthorhombic hydrated sodium molybdate with oxygen-vacancy defects10.1016/j.cej.2022.137174 ↗
5. Restructuring NiO to LiNiO2: ultrastable and reversible anodes for lithium-ion batteries
6. In situ growth of W2C/WS2 with carbon-nanotube networks for lithium-ion storage10.3390/nano12061003 ↗
7. Ag nanoparticle-decorated MoS2 nanosheets for enhancing electrochemical performance in lithium storage10.3390/nano11030626 ↗
8. Fabricating nanostructured HoFeO3 perovskite for lithium-ion battery anodes via co-precipitation
9. Boron oxide enhancing stability of MoS2 anode materials for lithium-ion batteries10.3390/ma15062034 ↗
10. Carbon-free Cu/SbxOy/Sb nanocomposites with yolk-shell and hollow structures as high-performance anodes for lithium-ion storage10.1016/j.jallcom.2021.160447 ↗
11. Self-assembled few-layered MoS2 on SnO2 anode for enhancing lithium-ion storage10.3390/nano10122558 ↗
12. GeTe-TiC-C composite anodes for li-ion storage10.3390/ma13194222 ↗
13. Intercalated Si/C films as the anode for Li-ion batteries with near theoretical stable capacity prepared by dual plasma deposition10.1016/j.jpowsour.2012.08.042 ↗
14. Understanding of the capacity contribution of carbon in phosphorus-carbon composites for high-performance anodes in lithium ion batteries10.1007/s12274-016-1383-4 ↗
15. A new strategy to prepare Ge/GeO2-reduced graphene oxide microcubes for high-performance lithium-ion batteries10.1016/j.electacta.2019.06.076 ↗
16. Ultrafast, highly reversible, and cycle‐stable lithium storage boosted by pseudocapacitance in Sn‐based alloying anodes10.1002/adma.201606499 ↗
17. In situ crosslinkable acrylic random copolymer binders for silicon anodes in Lithium-ion batteries10.1002/er.8027 ↗
18. Layered phosphorus-like GeP5: a promising anode candidate with high initial coulombic efficiency and large capacity for lithium ion batteries10.1039/C5EE02524A ↗
19. The promise and challenge of phosphorus‐based composites as anode materials for potassium‐ion batteries10.1002/adma.201901414 ↗
20. Unraveling the effect of salt chemistry on long-durability high-phosphorus-concentration anode for potassium ion batteries10.1016/j.nanoen.2018.09.058 ↗
21. Phosphorus-rich copper phosphide nanowires for field-effect transistors and lithium-ion batteries10.1021/acsnano.6b03954 ↗
22. Metal phosphides embedded with in situ‐formed metal phosphate impurities as buffer materials for high‐performance potassium‐ion batteries10.1002/aenm.202101413 ↗
23. Reversible and high‐capacity nanostructured electrode materials for Li‐ion batteries10.1002/adfm.200801095 ↗
24. CuP2 as high-capacity and long-cycle-life anode for potassium-ion batteries10.1016/j.jechem.2021.02.009 ↗
25. One hundred fold increase in current carrying capacity in a carbon nanotube–copper composite10.1038/ncomms3202 ↗
26. Copper coordination polymers with selective hole conductivity10.1039/D2TA00267A ↗
27. Electrochemical reactions of lithium with CuP2 and Li1.75Cu1.25P2 synthesized by ballmilling10.1016/S1388-2481(03)00110-3 ↗
28. Low‐temperature synthesis of honeycomb CuP2@ C in molten ZnCl2 salt for high‐performance lithium ion batteries10.1002/ange.201910474 ↗
29. Preparation and electrochemical properties of Cu3P/rGO nanocomposite protection strategy for lithium-ion batteries10.1007/s10008-022-05283-y ↗
30. Mechanochemically synthesized Cu3P/C composites as a conversion electrode for Li-ion and Na-ion batteries in different electrolytes
31. Facile synthesis of hollow Cu3P for sodium-ion batteries anode10.1007/s12598-021-01718-z ↗
32. Phosphorus doped carbon nanosheets encapsulated Cu3P heterostructure for superior lithium storage by experimental verification and first-principles calculation10.1016/j.apsusc.2022.153915 ↗
33. A MOF-derived self-template strategy toward cobalt phosphide electrodes with ultralong cycle life and high capacity10.1039/C7TA02600E ↗
34. Self‐supported CoP nanorod arrays grafted on stainless steel as an advanced integrated anode for stable and long‐life lithium‐ion batteries10.1002/chem.201700147 ↗
35. Vacancy and architecture engineering of porous FeP nanorods for achieving superior Li+ storage10.1016/j.cej.2021.132249 ↗
36. Metal–organic frameworks‐derived porous yolk–shell MoP/Cu3P@ carbon microcages as high‐performance anodes for sodium‐ion batteries
37. Unraveling improved electrochemical kinetics of In2Te3-based anodes embedded in hybrid matrix for Li-ion batteries10.1016/j.cej.2021.132395 ↗
38. Synthesis of silicon–carbon black composite as anode material for lithium ion battery
39. A new strategy to effectively alleviate volume expansion and enhance the conductivity of hierarchical MnO@C nanocomposites for lithium ion batteries10.1039/C7TA05986H ↗
40. Fabrication of poly (butylene succinate)/carbon black nanocomposite foams with good electrical conductivity and high strength by a supercritical CO2 foaming process10.3390/polym11111852 ↗
41. A High‐Capacity Tellurium@ Carbon Anode Material for Lithium‐Ion Batteries10.1002/ente.201402069 ↗
42. Lithium–tellurium batteries based on tellurium/porous carbon composite10.1039/C4TA02075H ↗
43. A potassium–tellurium battery10.1016/j.ensm.2020.02.021 ↗
44. Novel high-performance Ga2Te3 anodes for Li-ion batteries10.1039/D1TA05336A ↗
45. The microstructure and composition of equilibrium phases formed in hypoeutectic Te-In alloy during solidification10.1016/j.matchar.2017.01.017 ↗
46. Phosphorus-rich CuP2 embedded in carbon matrix as a high-performance anode for lithium-ion batteries10.1021/acsami.7b02826 ↗
47. Enhanced reversibility of red phosphorus/active carbon composite as anode for lithium ion batteries10.1016/j.electacta.2015.02.151 ↗
48. CuP2/C composite negative electrodes for sodium secondary batteries operating at room‐to‐intermediate temperatures utilizing ionic liquid electrolyte10.1002/celc.201800206 ↗