journal article·2023-04

Hot deformation behavior and microstructure of Ni-Cu rich Al-Si AA4032 alloy

Aida Azizi, Shahab Zangeneh, Milad Mojtahedi, Sajad Rasaee

Publisher page

Abstract

The Al-Si alloy family is among the most widely used nonferrous alloys, in both cast and wrought products. The alloys have undergone a continuous progress toward improvement of various properties. The present research investigated the hot deformation behavior of AA4032 alloy, modified with addition of 3.5 %wt of Ni and 3%wt of Cu. The study was carried out using constitutive equations at the temperature range of 693–823 K (420–550 °C) alongside the strain rates of 0.001–1 s −1 . The processing maps were determined by superimposing the instability maps on power dissipation maps. Moreover, the effect of extra copper and nickel on the microstructure and phase formation was studied via optical microscopy, SEM and TEM. The hot deformation activation energy of the Ni-Cu rich alloy is also calculated to be 338 KJ/mol (at ε = 0.1) which is notably higher than that of the self-diffusion of pure Al. It is found that the best hot working condition is the temperature range of 720–780 K with a strain rate of 0.001–0.03 s −1. The microstructure of the alloy at the calculated safe zone was uniform, while it showed cracking at the unsafe region of deformation parameters.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Effects of Ni content on microstructure and wear behavior of Al–13Si–3Cu–1Mg-xNi-0.6Fe-0.6Mn alloys
2. Dry sliding wear characteristics, corrosion behavior, and hot deformation properties of eutectic Al–Si piston alloy containing Ni-rich intermetallic compounds10.1016/j.matchemphys.2022.125758 ↗
3. Effect of Ni additions and hot deformation on precipitation behavior and hardness in Al–Si–Mg aged alloys10.1016/j.jallcom.2020.154429 ↗
4. Effects of deformation temperature on second-phase particles and mechanical properties of multidirectionally-forged 2A14 aluminum alloy10.1016/j.jallcom.2021.159459 ↗
5. Constituent phase diagrams of the Al–Cu–Fe–Mg–Ni–Si system and their application to the analysis of aluminium piston alloys10.1016/j.actamat.2005.07.003 ↗
6. Study on wear properties of aluminium–silicon piston alloy10.1016/S0924-0136(01)00869-X ↗
7. Elevated temperature short crack fatigue behaviour in near eutectic Al–Si alloys10.1016/S0142-1123(03)00157-9 ↗
8. Quantitative comparison of three Ni-containing phases to the elevated-temperature properties of Al–Si piston alloys10.1016/j.msea.2010.07.073 ↗
9. A statistical study on the dry wear and friction characteristics of Al-12.6 Si-3Cu-(2–2.6 wt%) Ni piston alloys
10. Effect of existing form of alloying elements on the microhardness of Al–Si–Cu–Ni–Mg piston alloy10.1016/j.msea.2011.04.022 ↗
11. Metastable phases in an Al-Mg-Si alloy containing copper10.1007/s11661-001-0219-2 ↗
12. The effect of Cu additions on the precipitation kinetics in an Al-Mg-Si alloy with excess Si10.1007/s11661-001-0254-z ↗
13. Effect of alloying elements on the segregation and dissolution of CuAl2 phase in Al-Si-Cu 319 alloys10.1023/A:1022857703995 ↗
14. The effect of heat-treatment on aluminum-based piston alloys10.1016/j.matdes.2006.09.010 ↗
15. Hot deformation behavior of an Al–5.7 wt% Mg alloy with erbium10.1016/j.msea.2009.03.029 ↗
16. McQueen · 2011
17. Constitutive equations for modelling flow softening due to dynamic recovery and heat generation during plastic deformation10.1016/S0167-6636(97)00035-5 ↗
18. Recent advances in hot working: fundamental dynamic softening mechanisms10.1007/BF02833651 ↗
19. Constitutive analysis in hot working10.1016/S0921-5093(01)01117-0 ↗
20. Modelling of hot deformation for microstructural control10.1179/imr.1998.43.6.243 ↗
21. Processing maps for hot working of titanium alloys10.1016/S0921-5093(97)00782-X ↗
22. A critical review of experimental results and constitutive descriptions for metals and alloys in hot working10.1016/j.matdes.2010.11.048 ↗
23. Hot deformation and processing map of 2519A aluminum alloy10.1016/j.msea.2010.10.080 ↗
24. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
25. On the development of instability criteria during hotworking with reference to IN 71810.1016/S0921-5093(98)00764-3 ↗
26. On the flow localization concepts in the processing maps of IN71810.1016/S0921-5093(99)00122-7 ↗
27. The occurrence of shear bands in isothermal, hot forging10.1007/BF02643318 ↗
28. T.H. Ludwig, Trace elements in Al-Si foundry alloys, PhD Thesis in Materials Science and Engineering, Norwegian University of Science and Technology, Trondheim, 2013.
29. Effect of additives on the microstructure and tensile properties of Al–Si alloys10.1016/j.jmrt.2019.03.003 ↗
30. Effect of temperature on the mechanical properties of Al–Si–Cu–Mg–Ni–Ce alloy10.1016/j.msea.2021.141762 ↗
31. Investigation of the effects of Ni, Fe, and Mn on the formation of complex intermetallic compounds in Al-Si-Cu-Mg-Ni alloys10.1007/s11661-011-0764-2 ↗
32. Phase formation in as-solidified and heat-treated Al–Si–Cu–Mg–Ni alloys: Thermodynamic assessment and experimental investigation for alloy design10.1016/j.jallcom.2012.10.182 ↗
33. Evolution of nickel-rich phases in Al–Si–Cu–Ni–Mg piston alloys with different Cu additions10.1016/j.matdes.2011.06.058 ↗
34. Dynamic precipitation and recrystallization in Al-12.5 wt% Si-0.6 wt% Mg-0.1 wt% Ti alloy during hot-rolling and their impacts on mechanical properties10.1016/j.jallcom.2019.02.160 ↗
35. The effect of Ni-doping on the microstructure, hot deformation behavior, and processing map of as-cast Al–Si piston alloy10.1007/s10853-020-05112-5 ↗
36. Hot deformation behavior and constitutive modeling of homogenized 6026 aluminum alloy10.1016/j.matdes.2015.02.024 ↗
37. Hot deformation behavior and microstructural evolution of homogenized 7050 aluminum alloy during compression at elevated temperature10.1016/j.msea.2010.11.016 ↗
38. Hot deformation behavior of 2026 aluminum alloy during compression at elevated temperature10.1016/j.msea.2009.09.042 ↗
39. Tensile deformation behavior of aluminum alloys at warm forming temperatures10.1016/S0921-5093(02)00915-2 ↗
40. Deformation characteristics of Al-4043 alloy10.1016/j.msea.2009.09.018 ↗
41. Study on hot deformation behaviour and constitutive equation of 4032 Al alloy10.1179/143307511X12858957675877 ↗
42. Investigation of thermal formability of aluminum alloy 403210.1361/105994906X136043 ↗
43. Constitutive behavior of an AA4032 piston alloy with Cu and Er additions upon high-temperature compressive deformation10.1007/s11661-019-05482-9 ↗
44. Evolution of activation energy during hot deformation of AA7150 aluminum alloy10.1016/j.msea.2013.01.080 ↗
45. Self-Diffusion and Impurity Diffusion in Group III Metals10.1016/S1470-1804(08)00003-5 ↗
46. Hot compressive deformation behavior of a eutectic Al–Si alloy based composite reinforced with α-Si3N4 whisker10.1016/S0254-0584(03)00323-7 ↗
47. High temperature deformation behavior and optimal hot processing parameters of Al–Si eutectic alloy10.1016/j.msea.2013.03.059 ↗
48. Humphreys · 2012
49. Twin boundary energetics in pure aluminium10.1016/0001-6160(73)90043-6 ↗