journal article·2023-03

Force enhanced wire laser additive manufacturing of aluminum and titanium alloys

Zhe Zhao, Shuoheng Xu, Jian Liu, Xiaohan Zhang, Min Xia, Yaowu Hu

Publisher page

Abstract

Brittle intermetallic compound formation is typically difficult to avoid during fusion joining of dissimilar metals. In this paper, a new approach called force enhanced wire laser additive manufacturing is proposed to join aluminum and titanium alloys. Ti6Al4V titanium alloy single track was additively fabricated on AA7075 plate successfully, through two liquid pools of the wire and the substrate, separated by a buckled unmelted part of the wire, leading to a mechanically interlocked interface. The effects of manufacturing parameters including laser power, wire feeding speed, scanning speed and initial contact force between wire and substrate on the surface morphology, internal interface microstructure and formation of intermetallic compounds were investigated through high-speed camera, spectrometer, laser topography, optical imaging, SEM imaging, XRD characterizations along with numerical simulations at different scales. And the maximum tensile strength reached 380MPa in the tensile test. The experimental and numerical results indicate that the thermal modulation approach can effectively control the formation of brittle compounds between titanium and aluminum alloys and that the initial contact force ensures a good bond between the two metals.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Metal additive manufacturing: technology, metallurgy and modelling10.1016/j.jmapro.2020.07.025 ↗
2. Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy10.1016/j.actamat.2019.11.053 ↗
3. The rise of 3-D printing: the advantages of additive manufacturing over traditional manufacturing10.1016/j.bushor.2017.05.011 ↗
4. A multiscale modeling approach for fast prediction of part distortion in selective laser melting10.1016/j.jmatprotec.2015.10.022 ↗
5. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
6. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
7. Evaluation of light-weight AlSi10Mg periodic cellular lattice structures fabricated via direct metal laser sintering10.1016/j.jmatprotec.2013.12.004 ↗
8. Grain structure control of additively manufactured metallic materials10.3390/ma10111260 ↗
9. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
10. Invited review article: Metal-additive manufacturing—modeling strategies for application-optimized designs
11. Friction stir welding process of dissimilar metals of 6061-T6 aluminum alloy to AZ31B magnesium alloy10.1016/j.jmatprotec.2014.11.039 ↗
12. Dissimilar metal joining of ZK60 magnesium alloy and titanium by friction stir welding10.1016/j.mseb.2011.12.031 ↗
13. Friction stir welding of dissimilar materials: an investigation of microstructure and nano-indentation study10.1016/j.jmapro.2020.03.050 ↗
14. Effect of process parameters on mechanical properties of friction stir welded dissimilar materials between AA6061-T651 and AA7075-T651 alloys
15. Studies on friction stir welding of aa 2024 and aa 6061 dissimilar metals10.1016/j.proeng.2013.11.031 ↗
16. State of the art about dissimilar metal friction stir welding
17. A review of numerical analysis of friction stir welding10.1016/j.pmatsci.2014.03.003 ↗
18. Additive manufacturing of multiple materials by selective laser melting: Ti-alloy to stainless steel via a Cu-alloy interlayer
19. Microstructure and tensile properties of Ti/Al dissimilar joint by laser welding-brazing at subatmospheric pressure10.1016/j.jmapro.2020.04.062 ↗
20. Microstructure and mechanical properties of welding–brazing of Ti/Al butt joints with laser melting deposition layer additive10.1016/j.jmapro.2019.01.040 ↗
21. Effects of heat input on microstructure and mechanical property of Al/Ti joints by rectangular spot laser welding-brazing method10.1007/s00170-008-1837-2 ↗
22. Stainless steel to titanium bimetallic structure using LENS™
23. Characterisation of laser welded dissimilar Ti/steel joint using Mg interlayer10.1179/1362171812Y.0000000002 ↗
24. Evolution of microstructures and mechanical properties during dissimilar electron beam welding of titanium alloy to stainless steel via copper interlayer10.1016/j.msea.2013.07.050 ↗
25. Microstructural and mechanical characteristics of laser welding of Ti6Al4V and lead metal10.1016/j.jmatprotec.2012.02.014 ↗
26. Interface microstructure and mechanical properties of laser welding copper-steel dissimilar joint10.1016/j.optlaseng.2009.02.004 ↗
27. Heat and mass transfer in laser dissimilar welding of stainless steel and nickel10.1016/j.apsusc.2012.02.143 ↗
28. Suppression of intermetallic reaction layer formation by controlling heat flow in dissimilar joining of steel and aluminum alloy10.1016/j.msea.2007.03.049 ↗
29. Investigation of metal mixing in laser keyhole welding of dissimilar metals10.1016/j.matdes.2020.109056 ↗
30. A comparison of the thermo-fluid properties of Ti-6Al-4V melt pools formed by laser and electron-beam powder-bed fusion processes
31. Numerical analysis of fused-coating metal additive manufacturing10.1016/j.ijthermalsci.2017.01.011 ↗