Plasma grown fluoride-rich artificial SEI for stabilizing Li metal anodes
Source abstract
Abstract
The growth and detachment of lithium (Li) dendrites are regarded as the primary issues hindering the practical application of Li metal anodes, and constructing a stable solid electrolyte interface (SEI) is considered to be the most straightforward solution. Herein, carbon tetrafluoride (CF4) plasma growth instead of adding of additives into electrolyte is proposed to construct an artificial SEI. Highly reactive C- and F-containing species from the ionized CF4 react with the surface Li metal to form a stable fluoride-rich (i.e. LiF and CF) artificial SEI. Profit from the high chemical stability, low diffusion barrier and high mechanical strength of plasma-generated SEI, the distribution of lithium ions (Li+) on the surface of the prepared Li metal (F-Li) anodes is homogenized and the Li dendrites are inhibited. The symmetrical cells composed of F-Li can cycle stably for 1700 (1 mA cm−2, 1 mAh cm−2) and 1400 h (2 mA cm−2, 2 mAh cm−2) with minimum overpotentials of about 13 mV and 80 mV, respectively. The enhanced cyclability in the full cell system paired with NCM811 cathode further demonstrates its practical application. The mechanisms underlying the artificial SEI growth and its component evolution during electrochemical cycling were also discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
2. Reviving lithium-metal anodes for next-generation high-energy batteries10.1002/adma.201700007 ↗
3. Recent developments of the lithium metal anode for rechargeable non-aqueous batteries10.1002/aenm.201600811 ↗
4. Towards practical lithium-metal anodes10.1039/C9CS00838A ↗
5. Revisiting the strategies for stabilizing lithium metal anodes10.1039/D0TA03774E ↗
6. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
7. Interface design strategy in combined materials of lithium thiophosphate electrolyte for solid-state lithium-ion batteries applications10.1016/j.jtice.2022.104446 ↗
8. A Functional electrolyte additive enabling robust interphases in high-voltage Li||LiNi0.8Co0.1Mn0. 1O2 batteries at elevated temperature10.1039/D2TA06594K ↗
9. Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode10.1039/C4CP05865H ↗
10. Review of emerging concepts in SEI analysis and artificial SEI membranes for lithium, sodium, and potassium metal battery anodes
11. Solid-solution-based metal alloy phase for highly reversible lithium metal anode10.1021/jacs.0c01811 ↗
12. Lithium dendrite suppression by facile interfacial barium engineering for stable 5 V-class lithium metal batteries with carbonate-based electrolyte10.1016/j.cej.2021.128928 ↗
13. Strategies to anode protection in lithium metal battery: A review10.1002/inf2.12189 ↗
14. An artificial hybrid interphase for an ultrahigh-rate and practical lithium metal anode10.1039/D1EE00508A ↗
15. Marrying ester group with lithium salt: cellulose‐acetate‐enabled LiF‐enriched interface for stable lithium metal anodes
16. Long cycle life lithium metal batteries enabled with upright lithium anode
17. Self-assembled monolayers direct a LiF-rich interphase toward long-life lithium metal batteries10.1126/science.abn1818 ↗
18. Porous LiF layer fabricated by a facile chemical method toward dendrite-free lithium metal anode10.1016/j.jechem.2019.03.014 ↗
19. Interfacial chemistry regulation via a skin-grafting strategy enables high-performance lithium-metal batteries10.1021/jacs.7b06437 ↗
20. Tackling realistic Li+ flux for high-energy lithium metal batteries
21. One-pot solution coating of high quality LiF layer to stabilize Li metal anode10.1016/j.ensm.2018.04.024 ↗
22. A multifunctional artificial protective layer for producing an ultra-stable lithium metal anode in a commercial carbonate electrolyte10.1039/D1TA00408E ↗
23. Uniform high ionic conducting lithium sulfide protection layer for stable lithium metal anode10.1002/aenm.201900858 ↗
24. Simultaneously in-situ fabrication of lithium fluoride and sulfide enriched artificial solid electrolyte interface facilitates high stable lithium metal anode10.1016/j.cej.2021.133193 ↗
25. Rapid and controllable a-Si:H-to-nc-Si:H transition induced by a high-density plasma route10.1088/1361-6463/aa7e6a ↗
26. All in one plasma process: From the preparation of S-C composite cathode to alleviation of polysulfide shuttle in Li-S batteries10.1016/j.jcis.2020.05.036 ↗
27. A plasma strategy for high-quality Si/C composite anode: From tailoring the current collector to preparing the active materials10.1016/j.electacta.2020.136222 ↗
28. Theoretical-limit exceeded capacity of the N2+H2 plasma modified graphite anode material10.1016/j.carbon.2019.01.084 ↗
29. Highly efficient silicon nanoarray solar cells by a single-step plasma-based process10.1002/aenm.201100085 ↗
30. Plasma-strengthened lithiophilicity of copper oxide nanosheet-decorated Cu foil for stable lithium metal anode
31. Plasma-assisted synthesis and surface modification of electrode materials for renewable energy10.1002/adma.201705850 ↗
32. Morphologically and chemically regulated 3D carbon for dendrite-free lithium metal anodes by a plasma processing10.1016/j.jcis.2022.03.135 ↗
33. A lithium anode protection guided highly-stable lithium-sulfur battery10.1039/C4CC05535G ↗
34. Fluoroethylene carbonate additives to render uniform Li deposits in lithium metal batteries
35. Cationic surfactant-based electrolyte additives for uniform lithium deposition via lithiophobic repulsion mechanisms10.1021/jacs.8b08963 ↗
36. Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes10.1038/nnano.2016.32 ↗
37. The synthesis of crystalline Ni microwire-nanosheet monolith for recoverable host of dendrite-free Li anode10.1016/j.jpowsour.2020.229418 ↗
38. A Rigid-flexible protecting film with surface pits structure for dendrite-free and high-performance lithium metal anode10.1021/acs.nanolett.1c02709 ↗
39. Plasma-enhanced fluorination of multi-walled carbon nanotubes for CFx cathode materials with ultrahigh electrochemical performance10.1063/5.0095063 ↗
40. Suppressing dendrites via interfacial ionic conductivity regulation in lithium metal batteries10.1021/acs.energyfuels.0c04404 ↗