journal article·2023-02

Investigation on high entropy alloys as interconnect material for intermediate temperature solid oxide fuel cells

K.S. Disna Sahane, Sheela Singh, D. Sivaprahasam, S. Senthil Kumar, Singanahally T. Aruna, A. Karthigeyan

Publisher page

Abstract

Investigation of Solid Oxide Fuel Cells (SOFCs) is receiving great attention due to its higher efficiency and zero environmental pollution during operation. Interconnects are a critical part of the SOFC stack which connects the cells in series and combines the electricity produced. The present study aims to investigate High Entropy Alloys (HEAs) for interconnect application in intermediate temperature SOFC. Towards this, FeCoCrNi, FeCoCrNiMn 0.1, FeCoCrNiMn 0.5, and FeCoCrNiMn HEAs are prepared by vacuum arc melting and examined for its phase evaluation. Thermal stability, thermal expansion, resistivity, oxidation, and Area Specific Resistance (ASR) are investigated up to 800 °C. Oxidation studies show the formation of multicomponent oxide in the HEAs which suppresses the growth of Cr 2O 3 layer. FeCoCrNiMn 0.1, FeCoCrNiMn 0.5, and FeCoCrNiMn HEAs possess ASR values less than 100 mΩ.cm 2 in the temperature range of 600–800 °C which ensure the superior performance of the SOFC stack.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Murty · 2019
2. Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤ x≤ 2) high-entropy alloys10.1016/j.mseb.2009.05.024 ↗
3. High-entropy alloys with high saturation magnetization, electrical resistivity and malleability
4. Effects of annealing on the microstructure and properties of 6FeNiCoCrAlTiSi high-entropy alloy coating prepared by laser cladding10.1007/s11666-011-9626-0 ↗
5. Diffusion barrier properties of AlMoNbSiTaTiVZr high-entropy alloy layer between copper and silicon10.1016/j.tsf.2007.07.109 ↗
6. 5 nm-thick (AlCrTaTiZrRu) N0. 5 multi-component barrier layer with high diffusion resistance for Cu interconnects10.1166/nnl.2011.1155 ↗
7. High thermal stability of AlCrTaTiZr nitride film as diffusion barrier for copper metallization10.1016/j.tsf.2009.03.078 ↗
8. Ru incorporation on marked enhancement of diffusion resistance of multi-component alloy barrier layers10.1016/j.jallcom.2010.11.124 ↗
9. Progress in material selection for solid oxide fuel cell technology: a review10.1016/j.pmatsci.2015.01.001 ↗
10. Phase formation and thermal stability of CoCrFeNi and CoCrFeMnNi equiatomic high entropy alloys10.1016/j.jallcom.2018.09.342 ↗
11. Creep, fatigue, and fracture behavior of high-entropy alloys10.1557/jmr.2018.191 ↗
12. Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
13. Deposition and evaluation of Mn-Co oxide protective sputtered coating on SOFC interconnects and current collectors10.1149/2.1221608jes ↗
14. Effect of Mn and V on structure and mechanical properties of high-entropy alloys based on CoCrFeNi system10.1016/j.jallcom.2013.12.210 ↗
15. On the influence of Mn on the phase stability of the CrMnxFeCoNi high entropy alloys10.1016/j.intermet.2017.09.011 ↗
16. Höhne · 2003
17. The phase stability of equiatomic CoCrFeMnNi high-entropy alloy: comparison between experiment and calculation results10.1016/j.jallcom.2017.05.175 ↗
18. Cathode materials for solid oxide fuel cells: a review10.1007/s10008-009-0932-0 ↗
19. D. Martínez Bastidas, High temperature corrosion of metallic interconnects in solid oxide fuel cells, 2006.
20. Ziman · 2001
21. Ultrahigh hardness and high electrical resistivity in nano-twinned, nanocrystalline high-entropy alloy films10.1016/j.apsusc.2018.01.050 ↗
22. Chromium poisoning of LSM-YSZ SOFC cathodes: I. Detailed study of the distribution of chromium species at a porous, single-phase cathode10.1149/1.1806392 ↗
23. Effects of La0. 67Sr0. 33MnO3 protective coating on SOFC interconnect by plasma-sputtering10.1016/j.ijhydene.2008.02.061 ↗
24. Hasegawa · 2014 · 507
25. Callister · 2021
26. Oxidation behavior of the CrMnFeCoNi high-entropy alloy10.1007/s11085-016-9616-1 ↗
27. Self-diffusion in Cr2O3 I. Chromium diffusion in single crystals10.1080/01418619208201560 ↗
28. Self-diffusion in Cr2O3 II. Oxygen diffusion in single crystals10.1080/01418619208201561 ↗
29. Diffusion of iron in Cr2O3: polycrystals and thin films10.1016/j.msea.2004.09.033 ↗
30. First study of manganese diffusion in Cr2O3 polycrystals and thin films by SIMS10.1080/14786430601120462 ↗
31. Diffusion of nickel in single-and polycrystalline Cr2O310.1080/14786430701848046 ↗
32. Chromium deposition and poisoning of cathodes of solid oxide fuel cells–a review10.1016/j.ijhydene.2013.10.042 ↗
33. Metallic interconnects for solid oxide fuel cell: a review on protective coating and deposition techniques10.1016/j.ijhydene.2016.03.195 ↗
34. Synthesis and microstructure of the (Co, Cr, Fe, Mn, Ni) 3O4 high entropy oxide characterized by spinel structure10.1016/j.matlet.2017.12.148 ↗
35. High entropy spinel oxide nanoparticles for superior lithiation–delithiation performance10.1039/D0TA04844E ↗
36. The low electrical resistivity of the high-entropy alloy oxide thin films10.1016/j.proeng.2012.03.037 ↗
37. Promising alloys for intermediate-temperature solid oxide fuel cell interconnect application10.1016/j.jpowsour.2006.02.028 ↗
38. Nano-CeO2 and-LaCrO3 dispersed ferritic stainless steels as potential interconnect materials for solid oxide fuel cells10.1016/j.jallcom.2017.03.181 ↗
39. Ceramic materials for solid oxide fuel cells
40. Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy10.1016/j.msea.2017.02.068 ↗
41. High-temperature tensile and creep properties of a ferritic stainless steel for interconnect in solid oxide fuel cell10.1016/j.jpowsour.2010.09.083 ↗